Tender For Construction Boundary Wall Of Zila Parishad Market Near Nirsa Hatia Along With Fencing Wire High Mast Light And Construction Of Drain At Market Premises
Tender Value
19.63 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
39300
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Boundary Wall Of Zila Parishad Market Near Nirsa Hatia Along With Fencing Wire High Mast Light And Construction Of Drain At Market Premises
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts levelling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | site clearance |
| 3 | Extra for earthwork in hard soil as per. Specification and direction of E/I (Vide classification of Soil item _B) |
| 4 | Filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5M all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 5 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per buy lading specification and direction of E/I (Mode of measurement compacted volume). |
| 6 | Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. |
| 7 | Providing designation 75B one Brick flat soling as per building specification and direction of E/I |
| 8 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in-charge. |
| 9 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 10 | Providing P.C.C M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 EXcluding screening shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of E/I |
| 11 | Providing R.C.C M-200 in nominal mix of (1:1.5:3) in foundation with approved quality of stone chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening shuttering mixing cement concrete in mixer and placing in position, vibrating, striking, curing taxes and royalty all complete as per building specification and direction of E/I |
| 12 | Centering and Shutering including strutting propping etc.and remove all Column, pillers, piers and abutment etc |
| 13 | Centering and Shutering including strutting propping etc.and remove all Lintels, Beams, Plinth Beam and Girders etc |
| 14 | Providing designation 75 B Brick work in C.M (1:6) in superstructure as per building specification and direction of E/I |
| 15 | Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (b) 12mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (c) 16mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) |
| 16 | Providing 12mm thick cement plaster (1:6) as per building specification and direction of E/I |
| 17 | Providing two coat snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper. Scaffolding, curing and taxes all complete as pr building specification and direction of E/I |
| 18 | Providing 25 mm thick Cement Concrete M20(1:1.5:3) -do- slope in with aaproved quality of stone chips of 20 mm to 6 mm - do- including screeing, shuttering and mixing cement concrete in mixer with admixture of integral water proofing and placing in position --do-- E/I. |
| 19 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l. |
| 20 | Supplying, fitting & fixing rolling shutter made as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I. |
| 21 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly. seaffolding and taxes all complete as per specification and direction of F/l and Providing primer one coat or red lead paint of approved makeover new steel surface -all complete as per drawing specification and direction of E/l. |
| 22 | Add Carriage of Material Sand (Lead 15 Km.(P)) |
| 23 | Brick (Lead 8 Km.(P)) |
| 24 | Stone Chips (Lead 15 Km.(P)) |
| 25 | Cement + rod (Lead 10 Km.(P)) |
| 26 | Dismantling pucca brick or lime work including stacing serviceable material in countable stacks with I6mm lead and disposal of unserviceable materials with all lead all complete as per direction of E/I. |
| 27 | Supplying of vertical post L50x50x6 (Gr-A) @ 4.50 kg/m |
| 28 | Drilling 6mm dia holes MS angle iron for fixing of staples etc. as per building specification and direction of E/I |
| 29 | Labour for fabriciting erection hoisting and fixing in poisition structural stell work in RS joist channel angle tee, flat plate lattice member built up compound section in column girder staircase or truss including cost fo guset plate at alll height and depths Bolding weilding (machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing building specificsation and direction of E/ |
| 30 | Providing PCC M-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in cement mixer and placing in position, vibrating, striking, curing, tax |
| 31 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 to 3 including screening shuttering, mixing cement concrete in mixer, placing in position vibrating, striking, curing taxes and royalty all comple as per building specificationand direction of E/I. |
| 32 | Providing and fixing concertina coil fencing with punched tape condertina coil 600mm dia 10 meter openable length (total length 90m) having 50 nos rounds per 6 meter length, upto 3m hight of wall with existing angle iron 'Y' shaped placed 2.4m or 3m apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied with G.J. staples and G.I. staples and GJ clips to retain horizntal including necessary bolts or GI barbed wire tied to angle iron all complete job. |
| 33 | carriage of material,sand(av lead 15km) |
| 34 | stone chips (Lead 15 Km.(P)) |
| 35 | cement + rod (Lead 10 Km.(P)) |
| 36 | Dismantling pucea brick or lime work including stacking serviceable materials in countable stacks within 1SM. Lead and disposal of unserviceable materials with all leads all complete as per direction |
| 37 | Excavation for structures,Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road work. |
| 38 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I |
| 39 | Providing designation 75 B one brick flat soling in foundation and plinth do-do-E/I |
| 40 | PCC1:3:6 in FoundationPlain Cement Concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days |
| 41 | PCC/RCC in SubstructurePlain/reinforced cement concrete in Substructure complete as per drawing and technicalspecifications RCC Grade M20 Height upto 5m |
| 42 | Centering and shuttering including strutting,propping etc and removal of form work for mass concrete do-do-E/I |
| 43 | Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I (a) 10mm (TMT coil Fe 500) (only valid for TATA(Tucson), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (b) 12mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) (c) 16mm (TMT coil Fe 500) (only valid for TATA(Tiscon), SAIL, JSPL, Elcetrosteel Ltd. Bokaro and Vizag(RINL) |
| 44 | Supplying fitting and fixing MS grill made of 20*60mm MS flat as per approved design and drawing do-d-o-E/I. |
| 45 | carriage of material,sand(av lead 15km) |
| 46 | Stone Chips (Lead 15 Km.(P)) |
| 47 | Brick (Lead 8 Km.(P)) |
| 48 | cement + rod (Lead 10 Km.(P)) |
| 49 | Supply of 12mtr. High mast in one section Construction S355 grade as per BS-EN 10 025 Top Dia 100mm, bottom dia 360mm, plate thickness 3mm, 12side polygon, galvanisation as per BS EN ISO 1461, base plate dia 570mm, base plate thickness 25mm, GI single spike lighting protection, maximum wind speed 47 m/s as per IS 875(Part-III)with 6 nos foundation bolts of PCD 445mm TS 600/ 24mm dia/850 mm long. Luminaries carriage : Material for 40 NB ERW Class B – M.S. Pipe, dia of carriage ring 450mm (ID) with 8 arm, welded, 2 sections having carrying capacity upto 8 luminaries. Trailing Cable : 5 core 2.5sq.mm. PVC flexible copper conductor Winch/Power Tool : Double drum, SWL 350 kg with .75 HP 6 pole single speed integral motor Rope : Grade AISI 304, 7/19 construction, dia 5mm, BLC 1450 x 2 having 2 nos of continues rope. Aviation obstruction light : twin dome aviation obstruction lights LED type as required. Feeder Pillar : control panel housing 32A TPN MCB incomer, single dial timer, 25A contactor circuit for the automatic control of luminaries outgoing terminals and control circuit for power tool araemote cotrol. |
| 50 | For 12 mtr. High mast : ITC of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring material like PVC insulated PVC sheathed flexible cable of suitable copper conductor lugs, MCB and all labour & construction of shallow foundation with M25 grade concrete for the high mast considering safe soil bearing capacity of 10T/ mtrs sq. for 12 M High mast. |
| 51 | S/F 200 Watt LED Flood light |
| 52 | S/L of XLPE insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor for working voltage upto and including 1100 volts conforms to IS:1554,Part-1) (Make-Havells/ Polycabe/ Finolex/ or equivalent) etc as reqd. (b) 4 core 10 sq.mm. (for Himast) |
| 53 | laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 35sq.mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 54 | 10 sq mm aluminium lugs |
| 55 | Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required. |
| 56 | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as required. |
| 57 | Add cost for Signboard and Photography |
| 58 | Goods & Service Tax (G.S.T. 18%) |
| 59 | 1% Labour Cess Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender