Tender For Supply Installation Testing and Commissioning of Lt Starter Panel Board For 40 Hp Star/ Delta ( 1 Running + 1 Stand By) Starter For Motors And Urgent Repair Of 40 Hp Motor & Pump At Ranghavi Estate In Dabolim Constituency.
Tender Value
10.08 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
5 days left
EMD
20163
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of Lt Starter Panel Board For 40 Hp Star/ Delta ( 1 Running + 1 Stand By) Starter For Motors And Urgent Repair Of 40 Hp Motor & Pump At Ranghavi Estate In Dabolim Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Supply, Installation, Testing and Commissioning of indoor type LT main panel board suitable for 40 HP motor-pump sets with all accessories like Star/delta starter, a.200 Amps 3P S.D.F for Incomer 1 Nob.160 A 3P S.D.F for Starter 2 Nosc.70Amps 3P Contactors 6Nosd.30 – 50 amps Over Load Relay 2Nose. Timer for Star/ Delta 2Nosf. Volt meter Digital with VSS 1Nog. Ammeter Digital with ASS 1Nosh. CTs for Ammeter 3Nosi. RYB Indicator set 3Nosj ON/OFF Indicator set 2Nosk. ON/OFF Push button set 2Nosl.10 KVAR Capacitor 2Nosm.40 Amps MCB for Capacitor 2Nosn. 32 Amps 3P contactor for capacitor 2 Noso. Single phasing preventer 2Nosp. Selector Switch 1Noand suitable provision for three phase departmental energy meter and sealing arrangement. The panel made up of 16/14 SWG CR Sheet fabricated panel duly powder coated in Siemens grey shade and mounted on suitable size MS angle frame and installed on the floor firmly using cement concrete or anchor fastener nut bolts etc. |
| 2 | Motor disconnection from supply line, dismentaling motor from foundation and shifting from existing foundation to work shop for repair. including transport. |
| 3 | 40 HP motor, 1445 rpm 50Hz, stator rewinding with I.SI market super enamel copper wire of suitable standard wire guage, insulation' 'F' class normex paper of suitable size, fibre glass sleeves of 2.4 and 6mm size, 20mm cotton tape for tieing, 4,6 and 16 fibre glass Lead wire for internal and lead wire terminals with suitable copper lugs crimping, soldering, ovening and varnishing. |
| 4 | Supply and replacement of both side bearings. |
| 5 | Supply and replacement of 6 way terminal bracket of suitable size for Pump I & II. |
| 6 | After repair of motor shifting to existing foundation & fixing making power supply connection. |
| 7 | Replacement of air release valve of Pump I & Pump II. |
| 8 | Replacement of gland packing to the pumps. |
| 9 | Repair & welding work for gland flange to the pump no. II. |
| 10 | Replacement of gland packing to the suction & delivering valves. |
| 11 | Star / Delta Starter servicing, contactor cleaning with CRC spray for smooth operation, replacement of defective power circuit leads, and terminal connections to the starter. |
| 12 | Replacement of 40 Amps terminal connections to the starter. |
| 13 | Supply and replacement of 125 Amps SDF switch to the starter for main switch. |
| 14 | 40 HP motor terminal rod extension by using 16 sqmm Copper lugs and ferrules crimping and tapping with fibre glass sleeves and connecting the same to the motor terminal. |
| 15 | Making arrangements for Energy meter outside the pump room with outdoor meter box. |
| 16 | Supply of 3 1/2 core armoured PVC/XLPE insulated PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size.;3 1/2 Core 25 sq.mm |
| 17 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade complete as required.;(1) 3 1/2 x 25 Sq. mm. |
| 18 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface etc. complete as required |
| 19 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast iron double flanged manually operated Sluice Valve generally conforming to IS : 14846 - 2000 having body door dome gland in graded cast iron to IS:210 Gr. FG 200Min. four faces and spindle nut of leaded tin bronze to IS:318 Gr. LTB 2 inside screw of non-rising stainless steel AISI 410 spindle Flanges drilled to IS:1538 Table 4 & 6. Valves tested by closed end method only (350mm and above will be fitted with BTB and Spur gear box. and back seat bush) TYPE P.N. 1.0 (Class A);Nominal Diameter in mm;150 |
| 20 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. Cast Iron double flanged single door swing non-return valve generally conforming to IS:5312 part-I having body door cover in graded cast iron to IS:210 Gr. FG 260 and door in CS ASTM A216Gr. WCB for 350mm & above body Ring in leaded tin bronze IS 318 GR LTB2 and door ring in natural rubber & bearing block of leaded tin bronze to IS:318 Gr. LTB 2 ( 350 mm & above ) hinge pin of stainless steel AISI 410 Flanges drilled to IS:1538 Table 4 & 6 TYPE P.N. 1.0 (Class A);Dia in mm;100 |
| 21 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;100 |
| 22 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I;Nominal diamter in mm.;150 |
| 23 | Supplying and fixing glass panes with new wooden fillets including removal of broken glass panes and old wooden fillets wherever necessary .;Glass panes 3mm thick |
| 24 | Providing and fixing M.S. tower bolts (barrel type) with necessary screws etc. complete;250 x 10 mm |
| 25 | Providing and fixing M.S. handles with necessary screws etc. complete.;125 mm |
| 26 | Provision of MS trench cover of size 1 mtr X 7 meter for transportation of vehicle with angle of 50 X50X 4 mm |
| 27 | Provision of water drain arrangement from the pumping room by making the hole to the wall , and fixing the pipe of 40 mm CPVC & diverting the water |
| 28 | Design, fabricate and make the collapsible hoist arrangement with MS I beam of Size 100 mm. 18 mm size of 500mm X 500MM , 2 Nos for lifting and shifting of pump and motor . Structure should have cross arm at the bottom of stand for support with fabrication work |
| 29 | Supply of chain block pulley of one tonne capacity with hook and chain of 6 meter |
| 30 | Painting of water pipeline and collapasable hoist |
| 31 | Cleaning of bushes and levelling of ground in front of pumping station. |
| 32 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in PVC casing caping with modular switch modular plates suitable size modular surface box of specified Category and earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required.;(c) Group C -- with Cat B Modular Accessories |
| 33 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required.;(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm casing ) |
| 34 | Supplying and fixing suitable size modular PVC box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required.;(b) Cat B |
| 35 | Supply and erecting of 15 inch (375 mm sweep) exhaust fan with double ball bearings 1400 rpmheavy duty complete with all accessories.;(a) Cat A |
| 36 | Supplying and fixing 6 A to 32 A C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required.;(a) SP Cat A Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender