Tender For Bmc For Csl Estate Outside Main Yard, Kochi (Jan 2027- Dec 2028)
Tender Value
49.99 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
13 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Bmc For Csl Estate Outside Main Yard, Kochi (Jan 2027- Dec 2028)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing Plain cement concrete/ RCC work including separately removing and stacking the available reinforcement and clearing away the debris within a lead of 150m complete. |
| 2 | Demolishing brick/ solid block work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 150 metres lead. |
| 3 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 150 meters lead. |
| 4 | Dismantling all types of old plaster or skirting in all levels raking out joints and cleaning the surface for re-plastering including disposal of rubbish to the dumping ground within 150 meters lead. |
| 5 | Dismantling all type of tile works, in floors, walls and roofs laid in cement mortar including disposal & stacking material within 150 meters lead. |
| 6 | Demolishing brick tile covering in open terrace up to 15 meters, including stacking of serviceable material and disposal of unserviceable material within 150 meters lead. |
| 7 | Dismantling and removing wooden frames of existing doors/windows/ ventilators having size upto 10 m2 in any levels, including removal of shutters, hinges, frames, holdfasts and all other fittings and stacking materials within a distance as given below within CSL area etc. complete. |
| 8 | Taking down damaged shutters of doors, windows, ventilators having size upto 10 m2 from any levels including removal of hinges,and all other fittings and stacking serviceable materials within a distance as mentioned below within CSL area etc. complete. |
| 9 | Dismantling aluminium/Upvc and Gypsum partitions,frames, doors, windows, fixed glazing and false ceiling in any levels including disposal of unserviceable surplus material disposal & stacking of serviceable material with in 50 meters lead. |
| 10 | Fixing of old frames of doors/ windows/ ventilators, having size upto 10 m2 in any levels including holdfasts and all other fittings, conveying materials, staging, cost of ladder etc. from locations 150m away etc. complete. (Old frames and shutters will be supplied departmentally). PCC required will be measured and paid separately. |
| 11 | Fixing of old shutters of doors/ windows/ ventilators in any levels including fixing of hinges and other fittings already available with new screws nails, cost of conveyance, lifting, ladder etc. Within a distance 150m away etc. complete. (If new fittings are used it will be measured separately). (Old shutters will be supplied departmentally). |
| 12 | Dismantling, removing and lowering wooden frame work, planked sheeting, ceiling planks, cladding, ceiling, wooden partition from any levels, stacking serviceable materials within a distance 150m within CSL area etc. complete. |
| 13 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. from any levels, Including stacking within 150 meters lead. |
| 14 | Dismantling A.C. / G.I / Al Corrugated / Trafford / Tile profile sheets of roofing/cladding, including ridges, hips, valleys and gutters etc. at all levels, including conveying and stacking the dismantled materials. Approximate within a distance of 150m etc. complete. |
| 15 | Dismantling and removing manglore pattern tiles over roof including ridges, hips, valley sheets, wind tiles, bordering etc and stacking serviceable materials within a lead of 150m and depositing the debris within a lead of 150m etc complete but excluding removal of timber which will be paid separately. |
| 16 | Dismantling and removing factory made cement concrete interlocking paver block in any size, design & shape,colour and pattern, stacking of useful tiles within a lead of 150 mtrs., disposal of debris etc. complete. |
| 17 | Supplying, spreading and consolidating crusher sand in layers not exceeding 150mm thick each in line and level including cost and conveyance of all materials labour, other incidentals etc. complete. |
| 18 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 19 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in any soil (not exceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 150 m. |
| 20 | Deployment of the following along with operator, fuel, oil and other incidental expenses etc complete for levelling, earthwork, handling of wastes etc.complete. |
| 21 | By engaging backhoe loader (JCB, Hitachi etc.) for any work like waste disposal & excavation work, clearing of debris, segregation of wooden/other wastes etc. |
| 22 | By engaging Tipper (capacity not less than 2T) for clearing various type of wastes in the site, loading, unloading etc. and conveyance with the lead of 2 km, etc. complete in all respect. |
| 23 | Providing and laying plain cement concrete 1:4:8 using 40mm down graded IS nominal size hard broken metal including cost and conveyance of all materials,labour for mixing, laying, consolidating curing etc.complete but excluding cost of cement and cost of formwork. |
| 24 | Providing and laying plain cement concrete 1:3:6 using 20mm down graded broken stones including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing etc.complete, but excluding cost of cement and cost of formwork. |
| 25 | Providing and laying reinforced cement concrete 1:11/2:3 using 20mm down graded broken granite metal including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing, cost of dewatering etc.complete but excluding cost of cement, cost of formwork and cost of reinforcement.(formwork and reinforcement which will be measured separately). |
| 26 | All works upto plinth level |
| 27 | All works above plinth level upto 13th floor |
| 28 | Providing and laying reinforced cement concrete 1:2:4 using 20mm down graded broken granite metal including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing, cost of dewatering etc.complete but excluding cost of cement, cost of formwork and cost of reinforcement. (formwork and reinforcement which will be measured separately) |
| 29 | All works upto plinth level |
| 30 | All works above plinth level upto 13th floor |
| 31 | Supplying and fabricating of reinforcement steel for RCC works including cost of steel(Fe 500 grade) and binding wires, labour for uncoiling ,straightening, cutting, bending, binding with 22G binding wire etc complete. |
| 32 | Providing Form work,Centering and shuttering including strutting, propping using shuttering sheet,supporting beams, supporting jacks,wooden planks and other incidentals etc. including removal of formwork after completion of work and clearing all materials and cost and conveyance of all materials labour etc. |
| 33 | Random rubble masonry in cement mortar 1:6 & pointing with CM 1:3 including cost and conveyance of all materials, labour, other incidentals etc complete, excluding cost of cement. |
| 34 | Providing and constructing 30x20x15 cm solid concrete block masonry in CM 1:6 in walls work up to Vth floor level, using best quality solid concrete blocks including cost & conveyance of all materials, scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, etc complete but excluding the cost of cement. |
| 35 | All works upto plinth level |
| 36 | All works above plinth level upto 13th floor |
| 37 | Providing and constructing 30x20x10cm solid concrete block masonry in CM 1:4 in walls up to V th floor level, using best quality solid concrete blocks including cost & conveyance of all materials, scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, etc complete but excluding the cost of cement. |
| 38 | All works above plinth level upto 13th floor |
| 39 | Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing, scaffoldings etc.complete at all levels but excluding cost of cement. |
| 40 | 1:3, 6mm thk |
| 41 | 1:4, 12mm thk |
| 42 | 1:3, 20mm thk |
| 43 | Plastering with CM 1:4, 15mm thk(external plastering) , floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete at all levels but excluding cost of cement. |
| 44 | All works up to 10m height |
| 45 | Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof |
| 46 | Providing neat cement flushing coat over the plastered surface including cost and conveyance of all materials, labour, other incidentals, curing etc.complete at all levels but excluding cost of cement. |
| 47 | Painting with primer of approved premium quality and shade after rubbing and cleaning the surface including cost and conveyance of all materialslabour, scaffolding other incidentals, curing (wherever required) etc.complete. |
| 48 | One coat cement primer on plastered surface |
| 49 | One coat zinc chromite primer |
| 50 | One coat wood primer |
| 51 | Providing and applying plaster of paris putty exterior grade of over plastered surface to prepare the surface even and smooth complete including cost and conveyance of all materials,labour etc.complete at all levels. |
| 52 | Painting with exterior quality Acrylic emulsion paint of approved premium quality and colour after rubbing and cleaning the surface using wire brush,sand paper etc. including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete. |
| 53 | One coat on old work |
| 54 | Two coat on old work |
| 55 | Painting with exterior quality Acrylic emulsion paint of approved premium quality and colour after rubbing and cleaning the surface using wire brush,sand paper etc. including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete. |
| 56 | Two coats on new surface |
| 57 | Painting with ready mixed premium plastic emulsion paint of approved premium quality and colour for interior after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials labour, scaffolding other incidentalsetc. complete. |
| 58 | One coat on old Surface |
| 59 | Two coat on old surface |
| 60 | Painting with ready mixed premium plastic emulsion paint of approved premium quality and colour for interior after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials labour, scaffolding other incidentalsetc. complete. |
| 61 | Two coat on new surface |
| 62 | Painting on iron or wood surface with synthetic enamel paint of approved premium quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials labour,scaffolding other incidentals etc. complete. |
| 63 | One coat on new work |
| 64 | Two coat on new work |
| 65 | One coat on old work |
| 66 | Two coat on old work |
| 67 | Painting on old plastered surface with synthetic enamel paint of approved quality and colour after plastering the surface. The work includes one coat primer application and two coat painting. The rate including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete at all levels. |
| 68 | Painting with aluminium paint of approved premium quality after scraping , wire brushing, rubbing and cleaning the surface using required equipments, tool brush, emiry paper etc wherever required including cost and conveyance of all materials labour, other incidentalsetc. complete. |
| 69 | One coat on new/old work |
| 70 | Two coat on old/new work |
| 71 | Painting sports court/runway/taxi line/track/apron marking with two or more nos of coats to give uniform finish with superior quality paint, i/c cleaning the surface of oil dirt, scales, oil, grease and other foreign material etc. and lining out complete. |
| 72 | Varnishing with copal varnishing of approved quality varnish after rubbing and cleaning the surface including cost, conveyance, labour, other incidentals etc. complete at all levels. |
| 73 | One coat on new work |
| 74 | One coat on old work |
| 75 | Finishing the wooden surface one or more coats with touch wood finish after cleaning the surface including cost and conveyance of all materials , labour etc. complete. |
| 76 | One or more coat on new work |
| 77 | One or more coat on old work |
| 78 | Finishing the wooden surface with Melamine matt finish polish after smoothening the wooden surface with sand paper, applying a coat of melamine filler using the required strainer to get the desired colour as instructed, sealer and two coats of matt finished clear and finishing it in perfection, including cost and conveyance of all materials, labour etc. complete. |
| 79 | One coat on new work |
| 80 | One coat on old work. |
| 81 | Painting with blackboard paint two coat of approved quality after cleaning the surface (as required) including cost and conveyance of materials, labour etc. complete. |
| 82 | Applying florolac paint of approved quality and colour (Shalimar's or equivalent) to floors after rubbing and cleaning the surface, including cost and conveyance of all materials, labour etc. complete. |
| 83 | One coat on old work. |
| 84 | Two coats on old work. |
| 85 | Washing and cleaning surface of all type of buildings such as Industrial / office/residential/compound wall etc by washing with water using hoses, brushes ,brooms etc or using water jet at all heights including all labour for removing off all dirt, wild growth etc disposing the debris within a lead of 150m etc complete. |
| 86 | Repair of existing wooden doors by chipping, sawing and planning of frames/ shutters for smooth operation of door, adjustment of building including removing and refixing of shutters as required at all heights by supply of labour, tools etc. complete. |
| 87 | Repair of existing wooden windows by chipping, sawing and planning of frames/ shutters for smooth operation of window, including removing and refixing of shutters as required at all heights by supply of labour, tools etc. complete. |
| 88 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length as per the direction, including cost and coveyance of all material, labour and other incidentals etc. complete. |
| 89 | Teakwood |
| 90 | Anjili, Jackwood, maruth. |
| 91 | Cheruteak/Pinkoda, Malesian thambakam. |
| 92 | Supply, cutting anjili/maruth wood to the required length, size (50x25mm), shape and fixing at height upto the foof of the building as per the requirement for various repair works including removal of damaged wooden parts, cost of nails, labour charges, scaffolding, other incidentals etc. complete. (Removal of roof tile and re-fixing will be measured under relevant item) |
| 93 | Supplying and fixing teak wood beadings 18mmx5mm for fixing expanded metal/wired glass/weld mesh etc to the existing window/door frames including cost and conveyance of all materials, labour all incidentals etc complete. |
| 94 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete. (Note:- Butt hinges and necessary screws shall be paid separately) |
| 95 | Teak wood shutters 35mm thick |
| 96 | Anjili/ Jackwood shutters 35mm thick |
| 97 | Cheruteak/Pinkoda, Malasian thambakam shutters 35mm thick |
| 98 | Supplying and fixing/replacing Marine plywood to the doors/partitions/floors etc including cost and conveyance of all materials labour charges, all incidentals etc. complete (any wooden frames required will be paid separatively. Rate is for providing on one side). |
| 99 | Marine plywood 6mm thk. |
| 100 | Marine plywood 12 mm thk. |
| 101 | Supplying and fixing/replacing 18mm thk Pre-laminated Particle board to the existing cupboards and cots wherever required at all heights including cost and conveyance of all materials labour charges, all incidentals, other sundries such as screws, nails etc. complete. (any wooden frames required will be measured paid separately). |
| 102 | Supplying and fixing/replacing laminated mica sheets of approved quality on doors, office tables etc. including cost, conveyance, incidentals, etc. complete (Rate is for area of mica sheet) |
| 103 | Supplying and fixing 3.5 to 4mm thick one side teak veneered plywood door including dismantling the existing door , replacing the damaged wooden members , removal of decayed plywood, all cost of materials like fevicol S.H. veneered plywood, screws, nails, other incidentals etc complete (area of plywood will be measured and payment will be made for this area). Wooden members will be measured and paid separately |
| 104 | Supplying and fixing FRP doors with frame work having 1.5mm thick FRP skin moulded with the core material forming a sandwich panel. Necessary wooden supports are to be provided for fixing the accessories such as 100 mm SS hinges 3 nos, 100mm SS tower bolt 1nos, 150mm SS aldrop 1nos, 100mm SS handle 2 nos, with 60mm SS screws,20mm SS screw 24 nos. 20mm wood screw 24 nos. and 30mm pvc grip 4 nos including the cost and conveyance of all materials above mentioned fixtures, labour and all other incidentals etc. complete. |
| 105 | With frame |
| 106 | Without frame |
| 107 | Supplying and fixing single moulded PVC doors with frame of approved quality and brand by the Engineer in charge. Necessary wooden supports are to be provided for fixing the accessories such as 100 mm SS hinges 3 nos, 100mm SS tower bolt 1nos, 150mm SS aldrop 1nos, 125mm aluminium handle 2 nos, with necessary screws and grips including the cost and conveyance of all materials above mentioned fixtures, labour and all other incidentals etc. complete. |
| 108 | With frame |
| 109 | Without frame |
| 110 | Supplying and fixing PVC aldrop of approved quality, brand and colour for PVC doors including cost and conveyance of all materials, labour etc. complete. |
| 111 | Providing and Replacing/fixing neccessary fixtures to doors, windows, ventilators, partitions with all incidentals charges including cost of screws etc complete. |
| 112 | SS Butt hinges 75x65x4 mm |
| 113 | SS butt hinges 100X70X4 mm |
| 114 | SS Butt hinges 125x70x4 mm |
| 115 | SS butt hinges 150x70x4 mm |
| 116 | 150x10 mm barrel tower bolt |
| 117 | 100x10 mm barrel tower bolt |
| 118 | SS 200x16x5 mm aldrop |
| 119 | SS 150x16x5 mm aldrop |
| 120 | 150mm Iron hooks and eyes for wind stays |
| 121 | 100mm Iron hooks and eyes for wind stays |
| 122 | Spring hinges double action |
| 123 | Stainless steel handle 100 mm |
| 124 | Stainless steel handle 150 mm |
| 125 | SS soft close hinges of size 12.5X6.3X2cm |
| 126 | Telescopic drawer channels 300 mm |
| 127 | Telescopic drawer channels 500 mm |
| 128 | PTMT door catcher of length 72 mm and dia. of 42 mm |
| 129 | Cupboard locks with six levers |
| 130 | 125mm handles with screws |
| 131 | SS door latch 150x16x5 mm |
| 132 | SS door latch 100x16x5 mm |
| 133 | Pad lock |
| 134 | Magnetic catcher |
| 135 | Aluminium lock |
| 136 | Providing & fixing following fixtures of approved brand, with SS screws and PVC grip (if required), including cost and conveyance of all materials, labour other sundries etc. complete. |
| 137 | SS door stopper |
| 138 | SS door chain |
| 139 | Supplying and fixing mortise lock of approved make for doors by replacing the existing damaged locks including cost and conveyance of all materials, labour other incidentals etc. complete. |
| 140 | Special type |
| 141 | Normal type |
| 142 | Supplying and fixing best quality and approved type Automatic Hydraulic door closers (medium) as per the instructions of the department personals including all cost of materials, labour charges etc. complete. |
| 143 | Servicing Automatic door closers on call after repairs including cost and labour for replacement of defective parts if any etc. complete. |
| 144 | Servicing of floor spring through authorized servicing agents, replacing springs,pivots or any other necessary spares, accessories and consumable if required including cost and conveyance of all materials,labour,all other incidentals etc complete. |
| 145 | Providing and fixing highly adaptable floor spring suitable for all standared single and double action door including cost and conveyance of all materials,labour,all other incidentals etc complete. |
| 146 | Providing and fixing highly adaptable floor machine (Heavy duty) suitable for all standared single and double action glass door including cost and conveyance of all materials,labour,all other incidentals etc complete. |
| 147 | Supplying and fixing approved quality glass door handles with suitable fittings, including all cost of materials, labour charges etc. complete. |
| 148 | Supplying and fixing approved quality corner/centre locking system to glass doors with suitable fittings,including all cost of materials, labour charges etc. complete. |
| 149 | Servicing/Repairing of locking system & door handles for existings glass doors including cost and labour for replacement of defective parts if any etc. complete. |
| 150 | Supplying and fixing MS clamps suitable size to doors and windows including cost of nails etc. complete (concrete block will be measured in relevant items.) |
| 151 | Providing and fixing M.S. grills of required pattern in frames of windows,ventilators etc. with M.S. flats, square or round bars etc. including painting with 2 coats of synthetic enamel paint over a priming coat of zinc chromate primer to get a polished finish surfaces etc. complete. |
| 152 | Supplying and fixing/replacing broken glass panes for doors,windows, ventilators, partitions etc including cost and conveyance of all materials and other incidentals etc. complete. (Rate includes cost of wooden beading, putty, clips etc of approved quality wherever required) |
| 153 | 4 mm plain glass |
| 154 | 4 mm figured/ pinheaded-Nearest |
| 155 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions (Glazing and paneling to be paid for separately) : |
| 156 | Providing and fixing in position openable type mosquito proof Door using 25.12 x 13.39mm or higher size powder coated aluminium section for shutter, two intermediate 20.30 x 10.27 mm or higher size horizontal aluminium member for shutter fixing on an aluminium frame made by using 38 x 25 mm section , fixing of stainless steel net 316 grade, EPDM beading, Aluminium mosquito hinges of size 40mm, PVC latches, screws, nails, Applying matching colour silicon sealant for joints of wall and aluminium frame etc. including cost and conveyance of all materials, all labour, fixtures etc. complete . |
| 157 | Providing and fixing in position openable type mosquito proof Door using 25.12 x 13.39 mm or higher size powder coated aluminium section for shutter, two intermediate 20.30 x 10.27 mm or higher size horizontal aluminium member for shutter and stainless steel net 316 grade, EPDM beading, Aluminium mosquito hinges of size 40mm, PVC latches, screws, nails, Applying matching colour silicon sealant for joints of wall and aluminium frame etc. including cost and conveyance of all materials, all labour, fixtures etc. complete. |
| 158 | Aluminium repair work For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required. |
| 159 | Supplying, providing and fixing hylam board of approved shade and thickness 3mm, including cost and conveyance of all material, labour and other incidentals etc complete as per drawings and directions. |
| 160 | Supplying and fixing fiber type mosquito proof net to the door / window / ventilator frames after removing the old nets already fixed and replacing using wooden beading screws, nails etc. including cost and conveyance of all materials labour etc. complete (Planed and framed work if required for openable shutters and fittings will be paid separately) |
| 161 | Supplying and fixing 316 grade stainless steel mosquito proof net using necessary EPDM beading after removing damaged fibre nets from the existing aluminium frames, including cost for removal and refixing of frames if required, cost and conveyance of all materials, labour etc. complete. |
| 162 | Door shutter |
| 163 | Window shutter |
| 164 | Supplying and fixing mosquito proof net covering for windows and ventilators using fiber net fixing using velcro including cost of nails, stitching charges, cost and conveyance of all materials, labour etc. complete. |
| 165 | Supplying and fixing mosquito proof net covering for , windows and ventilators using netlon net and fixing using velcro including cost of nails, stitching charges, cost and conveyance of all materials, labour etc. complete. |
| 166 | Replacing the existing damaged fibre nets from the existing aluminium frames (doors& windows) and supplying and fixing with new SS 316 grade mosquito proof net using necessary EPDM beading, cost and conveyance of all materials, labour etc. complete. |
| 167 | Fixing 316 grade stainless steel mosquito proof net using necessary EPDM beading after removing existing SS mosquito nets from the existing aluminium/SS frames, including cost for removal, cleaning and refixing of frames, cost and conveyance of all materials, labour etc. complete.(SS Net shall be supplied by CSL). |
| 168 | Door shutter |
| 169 | Window shutter |
| 170 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions. (Cost of aluminium snap beading shall be paid in basic item): |
| 171 | With float glass panes of 4 mm thickness. |
| 172 | With float glass panes of 6 mm thickness. |
| 173 | With float glass panes of 5 mm thickness. |
| 174 | With retroreflective annealed glass 6mm thickness. |
| 175 | Supplying and fixing ACP sheet, with necessary sealent, screws and hardwares, including cost and conveyance of all materials, labour other incidentals etc. complete |
| 176 | Supplying and laying anti-skid/ non slippery ceramic tile 300 X 300 mm flooring tiles of approved quality, brand and colour (Asian/Somany/Kajaria/ Johnson/ RAK) set in CM 1:4 20mm thick and adding necessary cement grout for the proper binding of the tiles to line and level,providing 3mm spacing and pointing the joints using epoxy grout mix of approved brand, filling/ grouting and finishing to match with the tiles including cost and conveyance of all materials, labour other incidentals etc. complete excluding cost of cement. |
| 177 | Supplying and laying ceramic glazed wall tiles 450 X 300 mm of first quality, of approved make, brand and colour (Asian/Somany/Kajaria/ Johnson/ RAK) for dadoing works over 12mm thick plastering with cement mortar 1:3 and pointing the joints using white cement mixed with pigmentof matching shade with the tiles in line and level including cleaning the existing surface properly, cost and conveyance of all materials, labour other incidentals etc. complete, but excluding the cost of cement. |
| 178 | Supplying and laying glossy Vitrified flooring tiles 600 X 600 mm of approved quality and brand (Asian/Somany/Kajaria/ Johnson/ RAK) set in CM 1:4 20mm thick adding necessary pure cement grout for the proper binding of the tiles to line and level pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals etc. complete excluding cost of cement. |
| 179 | Providing and laying double charge glossy vitrified floor tiles not less than 600 x 600mm size of approved make, quality and colour after clearing the floor properly by pasting with chemical adhesive Cerabond and equivalent and pointing the joints of tiles, using epoxy grout, including filling/grouting, finishing etc complete.( But excluding the cost of cement.) |
| 180 | Supplying and laying vitrified tiles 600x600mm of approved quality, brand and colour (Asian/Somany/Kajaria/ Johnson/ RAK) for flooring by pasting with chemical adhesive Cerabond/equivalent and pointing the joints of tiles having joints of 3mm width, using pointing powder including cost and conveyance of all materials, labour other incidentals etc. complete. |
| 181 | Supplying and laying Vitrified flooring tiles (Glossy finish) of size 800 X 800 mm of approved quality and brand for flooring set in CM 1:4, 20mm thick mortar, adding necessary pure cement grout for the proper binding of the tiles to line and level pointing the joints with white cement including cost and conveyance of all materials, labour other incidentals etc. complete excluding cost of cement. |
| 182 | Supplying and laying Chequered precast cement concrete tiles (Ferrocon/ Scorpio / Endura / equivalent) of approved quality, brand and colour set in CM 1:4, 20mm thick and cement adding necessary cement grout for the proper binding of the tiles to line and level pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals etc. complete. excluding cost of cement. |
| 183 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick of compacted bed of 6mm aggregate, filling the joints with fine sand etc including finishing the edges with concrete all complete. |
| 184 | Supplying, laying and leveling 6mm aggregate in 50mm thickness & laying interlock pavers (supplied by CSL )including sectioning and levelling of soil, removal of excess earth, including cost and conveyance of all materials, labour other incidentals etc. complete. |
| 185 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including laying in uniform layers with Leveller in sub- base / base course on well prepared surface and compacting with plate compactor achieve the desired density, complete, including cost and conveyance of tools, machineries & labour etc. complete. |
| 186 | Supplying, laying and leveling 6mm aggregate in an average thickness of 40mm over polythene sheet of thickness including sectioning and levelling of soil, removal of excess earth, including cost and conveyance of all materials, labour other incidentals etc. complete. |
| 187 | Fabrication of all types of structural steel works by straightening,cutting & welding using all types of steel sections plates,flats, angles, of any size and weight as per approved drawing or as instructed,erecting in position to line and level by welding/bolting embedding in concrete including painting with one coat of Zinc chromate primer ,hire charges for toolsand plants,cost of electrodes,other incidentalsetc. complete. |
| 188 | Using departmental steel. |
| 189 | Using angles, flats, channels, rods and Hollow sections etc. procured by the contractor. |
| 190 | Supplying and fixing roofing/cladding with 0.46mm thick coloured Aluminium Trafford sheet from reputed manufacturers using approved size self tapping, self drilling screws with EPDM sealing washers to be fixed on crest of sheets with minimum end overlaps of 150mm and appropriate side laps including cost and conveyance of all materials labour for all leads and lifts, other incidentalsetc. complete. (Finished area of roof sheet before laying ridges/valleys/crimped sheets will only be measured and considered for payment. Overlaps will not be measured) |
| 191 | Supplying and fixing roofing/cladding with 0.46mm thick aluminium corrugated sheet using fixing with self drilling & self tapping screws with necessary overlap 150mm at ends, sides, including cost and conveyance of all materials, labour for all leads and lifts up to a height of 5metres , other incidentals etc complete. |
| 192 | Installation of corrugated / trafford roofing sheets (supplied by CSL) on the existing / newly fabricated steel structures, fixing by approved brand self driven screw, including cost and conveyance of tools, machineries & labour etc. complete. |
| 193 | Supplying and fixing roofing with 1mm thick or nearest available solid Polycarbonate sheet of approved colour, fixed using aluminium top and bottom sections of 50mm width using self drilling non- corrosive screws, fixing to the M.S hollow section frames of approved design, including cost and conveyance of all materials, labour, all leads and lifts, other incidentals etc complete. ( The quantity of Hollow sections will be payable under relevant item). |
| 194 | Supplying and fixing roofing with 2mm thick or nearest available solid Polycarbonate sheet of approved colour, fixed using aluminium top and bottom sections of 50mm width using self drilling non- corrosive screws, fixing to the M.S hollow section frames of approved design, including cost and conveyance of all materials, labour, all leads and lifts, other incidentals etc complete. ( The quantity of Hollow sections will be payable under relevant item). |
| 195 | Supplying and fixing roofing with 4mm thick or nearest available solid Polycarbonate sheet of approved colour, fixed using aluminium top and bottom sections of 50mm width using self drilling non- corrosive screws, fixing to the M.S hollow section frames of approved design, including cost and conveyance of all materials, labour, all leads and lifts, other incidentals etc complete. ( The quantity of Hollow sections will be payable under relevant item). |
| 196 | Supplying and fixing roofing /cladding with 6mm thick Poly Carbonate Sheet multi-wall of approved quality, brand and colour, fixing using aluminium sections and rubber beading of 50mm wide or nearest size, aluminium sections at sides using self drilling non-corrosive screws, including cost and conveyance of all materials, labour for all leads and lifts up to a height of 5 meters, other incidentals etc complete. |
| 197 | Providing and fixing of Pre-coated colour or mill finish Aluminium Ridge sheets in using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer including cost and conveyance of all materials, labour and other incidentals etc complete. |
| 198 | Ridges plain (500 - 600mm). |
| 199 | Supplying and fixing PVC gutter at the eve of roof for collecting rain water including necessary elbow drop,end drop,open nosil, jointer and pathy clamp for holding gutter fixing to line and level cost and conveyance of all materials labour etc. complete. |
| 200 | Gutter (600 mm over all girth). |
| 201 | Providing and fixing 0.50 mm aluminium plain sheets to masnory walls, wood planks, shelf, doors, windows, expansion joints etc. using necessary fittings, including cost and conveyance of all materials labour charges, all wastages, other sundries etc. complete. |
| 202 | Supplying and providing MP hip and ridge tiles first class set in CM 1:3, including cost of all materials, labour, conveyance charges, other incidentals etc. complete. |
| 203 | Resetting the existing MP hip and ridge tiles by putting both sides cement mortar 1:2 etc. complete (Rate is for doing both sides. If only one side is done half the length will be measured). |
| 204 | Cleaning the tiles/ AC/ Aluminium/GI/polycarbonate roof surface including drain water pipes/ down water pipes etc and depositing the debris within initial lead of 150m etc complete. (where actual area is not possible to measure, labour will be paid as per the relevant item. For cleaning down water pipes, if required to be done for four storied buildings separately due to blockage, payment will be made as per relevant item) |
| 205 | Cleaning the RCC/ weather proofing surface (including rain water pipes/ down water pipes) terrace,open corridors, surroundings etc.by removing all wild growths and disposing the debris within initial lead of 150m etc. complete (where actual area is not possible to measure, labour will be paid as per the relevant item.) |
| 206 | Providing & Installing to true line and level commercial type Gypsum board of 12.5mm thick (Suspended Modular False Ceiling-White) including all necessary fittings, labour and other incidentals etc. complete. |
| 207 | Supplying & replacing Calcium silicate ceiling board of size 595x595x15mm tegular edged to the existing aluminum frame work in all floors of the building at places wherever required including cost and conveyance of all materials labour charges, scaffolding and other sundries incidentals etc complete. |
| 208 | Providing and fixing in position PVC False ceiling upto 5m height to line and level with following specifications: Ceiling- PVC moulded multi wall section,360cmx30cmx9mm or nearest available size(Jeno from syntex or equivalent)of approved colour fixed with self tapping screws to Aluminium section. Main ceiling -GI channel section of size 80x26x51x0.50mm or nearest available size at 600mm centre to centre connected with supporting inter section to existing purlin/truss in line and level.,Intermdiate channel section 15x45x15x0.50 mm or nearest avaaliable size Supporting Inter section -20mmx20mmx 0.60 mm or nearest available size GI angle connecting aluminium section to purlin/truss. Joint profile -PVC joint profile 20mm or nearest available size at 180cm centre to centre fixed with self tapping screws. Cornice - PVC cornice 25mm or nearest available size fixed along walls using screws . The rates including cost of all materialsand labour other incidentals etc complete. |
| 209 | Providing & installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. Grids width: 24 mm finished in approved shade. The main runners & cross Tees to have \\"stab\\" installation system made of corrosion protected galvanized steel or approved equivalent. Ceiling tiles are tegular edged Calcium Silicate ceiling tile of size 595x595x15mmtk. GI sections for use as Main Runners are 24 x 38 x 0.30 mm, Cross Tees are 24 x 25 x 0.30 mm, and Wall Angles are 24 x 24 x 0.40 mm and GI supports (GI sections can be changed to higher sections having same or greater thickness to suit the site conditions). False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc. Rate quoted to include cost and conveyance of all materials, all cut outs required for light fixtures, labour cost, hire charges of equipments, consumables, scaffolding cost, other incidentals etc. complete. |
| 210 | Supplying and fixing M.S weld mesh of following size to Steel/wooden members, doors etc. (Steel/wooden members will be measured and paid separately) using necessary screws, nails etc painting with one coat of iron primer and one coat enamel paint including cost and conveyance of all material, labour and other incidentals etc. complete. |
| 211 | 25 x 25 x3 mm |
| 212 | 50 x 50 x 4 mm |
| 213 | 65 x 65 x 3.25 mm |
| 214 | Providing and fixing G.I. chain link fencing of size 50x50x4mm mesh of required width to M.S. structurals members already fixed using necessary screws,nails etc. including painting with one coat of iron primer and one coat enamel paint and strengthening with nuts, bolts of size 50x10mm and washers including cost of chain link fencing, labour etc complete.(M.S structurals measured and paid seperatly.) |
| 215 | Servicing the rolling shutters, sliding doors and collapsible gates upto 10 M2 which includes greasing, oiling, overhauling and replacing defective spare parts (if required) including cost of labour, sundries, general cleaning, filling oil in gear set but excluding cost of spare parts which will be paid separately. (Replacement bolts and nuts, screws, pins, etc. is to be done by the contractor without any extra cost. Other all spare parts will be measured and paid as per relevant item Rate is for one time operation and is valid and effective for 6 months without any operational problem from the date of overhauling). |
| 216 | Supplying the following good quality genuine spare parts of approved make (Asian/ Anand/ Premier/ Kaniampuram) for the rolling shutters including cost and conveyance of materials, labour and other incidentals etc. Complete. |
| 217 | Axle spring size 600mm/8mm - 24\\" |
| 218 | Axle spring size 600mm/8mm - 21\\" |
| 219 | Axle spring size 450mm/7mm - 18\\" |
| 220 | Axle bearing pully 7\\" dia. Size |
| 221 | Gear set with box, Bracket, worm wheel & pinion |
| 222 | Ball bearing SKF with hologram to prove genuine |
| 223 | Ball bearing NBN with hologram to prove genuine |
| 224 | Lock plate/ bottom plate 14guage - 2mm thick with all accessories including handle etc. Complete |
| 225 | Leaf (lathes) 20 gauge |
| 226 | Top cover 22 guage |
| 227 | Guide channel 14guage - 2mm thick |
| 228 | Bracket 14\\" dia. 2mm thick |
| 229 | MS Pipe 37.5mm or higher size |
| 230 | Lock set 1 pair |
| 231 | Worm wheel male and female of Rolling shutters |
| 232 | Stopping water leakage through the cracks, gaps, leakages in AC sheet/G.I. Sheet/valley gutter/down water pipes, at height upto 7m by pasting Tarfelt sheet/Bostik flashband tape/Sika multiseal tape after cleaning the surface, making dustproof and making the surface moisture free, fixing tape, tying with binding wire in the case of down water pipes including cost of all materials, labour, tools and other incidental charges, charges of fixing and removing temporary lifeline & roof ladder up to 6m length etc. complete. |
| 233 | Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diameter (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete. |
| 234 | Pressure grouting in Concrete/Masonry area etc using High performance polyurethane (PU) grout of approved brands like CERA ,SIKA, FOSROC,PIDILITE, etc , Insert 10 mm OD GI packers (capable of sustaining a pressure of up to 10 kg/cm²) into the 12 mm diameter holes etc at points as directed by the engineer- in- charge .The ratio of propotioning chemical as per manufactures recomendation. The rate shall include the cost and conveyance of all materials, hire charges for pressure gun, all labours and materials etc |
| 235 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete |
| 236 | Supplying and applying Crack 'X' or equivalent material along walls on all heights including cost and conveyance of all materials , labour etc. complete.The rate is inclusive of making grove up to a maximum width of 20mm or nearest. |
| 237 | Carrying out miscellaneous works by arranging various categories of labour. |
| 238 | Mason, Plumber, Painter, Welder, Fabricator and other skilled workers |
| 239 | Man, Women and other non skilled workers |
| 240 | Taking down the existing MS water tank cover of CSL quarters at Cheriyakadavanthra (water tank over the terrace at IV floor) for works as follows : |
| 241 | To the top of roof slab chipping, scrapping, applying one coat iron primer of approved quality, two coats of synthetic enamel paint including cleaning the tank, placing back the cover plates, over the tank after painting, all labour charges, hire for tools and plants etc. complete. |
| 242 | From top of water tank and safely taking the cover slab to ground and stacking at locations pointed out by engineer in charge including charges for lowering from fifth floor to ground floor, labour, conveyance, stacking, etc all incidentals complete. |
| 243 | Supplying and pasting sun control film to the shutter of glazed windows/doors/ partitons after cutting to the required size including cost and conveyance of all materials, labour other sundries etc. complete. |
| 244 | Supplying and pasting self adhesive sticker to the required areas after cutting to the required size, including cost and conveyance of all materials, labour other sundries etc. complete. |
| 245 | PVC one way vision paper |
| 246 | Reflective type/Dark film/Frosted |
| 247 | Removal of existing shingles sheets from the roof without damaging the same, fixing back the sheet in position after completion of maintenance/leak proofing works, including cost and conveyance of all materials, all labour, fixtures , consumables etc. complete. (Water proofing/leak proofing works shall pay in the relevant item) |
| 248 | Removal of existing damages shingles sheets without damaging the fibre cement board, supply and fixing of new shingles sheets of approved brand and colour after completion of maintenance/leakproofing works, including cost and conveyance of all materials, all labour, fixtures, consumables etc. complete. (Waterproofing/leak proofing works shall pay in the relevant item) |
| 249 | Removal of damaged fibre cement board sheets from roof , taking down the removed sheets from roof to ground ,supply and fixing of approved brand fibre cement board of 12mm thickness using fasteners , finishing the joints of board with bitumen waterproofing/tarfelt , including cost and conveyance of all materials, fixtures labour for cutting, fixing and shifting of materials etc. complete. (Waterproofing/leak proofing works shall pay in the relevant item) |
| 250 | Supplying and stacking at site (OPC/PPC/PSC) cement conforming to relevant IS code. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender