Tender For Replacement Of The Existing Ac Sheet With Hot Dipped Galvanized Pre-Painted Steel Sheet In T-Shed I & Ii, Replacing The Rolling Shutters And Repair Works In T-Shed I & Ii At Voc Wharf Inside Green Gate At Vocpa.
Tender Value
1.97 Crore
Estimated cost
Bid Submission
10 Nov 2026
16 days left
EMD
3.95 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tuticorin → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of The Existing Ac Sheet With Hot Dipped Galvanized Pre-Painted Steel Sheet In T-Shed I & Ii, Replacing The Rolling Shutters And Repair Works In T-Shed I & Ii At Voc Wharf Inside Green Gate At Vocpa.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Asbestos Cement Sheet roofing (AC Sheet) incliding ridges, hips, velleys, gutters, etc., and stacking the serviceable materials and dispostal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 2 | Providing and fixing Precoated metal sheet 0.45mm for Roofing with hot dipped galvanised prepainted steel sheet for roof of make TATA or equivalent including cost of metal sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers. |
| 3 | Providing and fixing Polycarbonate Sheet (6mm thick) roofing for roof trusses of shed and shade including cost of Polycarbonate sheet, conveyance, fixing the sheet with necessary clamps / screws and labour charges for fixing sheet etc., complete complying with AISS and as directed by the departmental officers. |
| 4 | Supplying and fixing Aluminium Non-Power Driven/Wind Turbine Ventilator of size 600 mm dia with suitable fixing arrangement in roofing including cost of Turbine Ventilator and other suitable accessories material, fixing with necessary clamps / screws, all labour charges for fixing Turbine roof ventilator, scaffolding, conveyance charges, all lead and lift etc., complete and as directed by the Engineer in Charge. |
| 5 | Supplying and fixing Rolling shutters with ISI make of approved size and section using 18 GI sheet with Gear Operated Type (from 8 sqm. to 12 sqm. Area), M.S.laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength and M.S top cover to required thickness for rolling shtters. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., including cost of all materials, labour charges and minor tools, all handling and transportation charges to work site etc., complete and as directed by the departmental officers. |
| 6 | Supplying the structural steel, MS Flats, Square Rods, Angles, Channels etc., for vertical members / bracing /stiffeners / Base plates or for any other usage as a structural member, fabricating, welding and erecting the frame work in position at the locations shown in the drawing including all labour, materials, conveyance, tools & plants, etc., complete and as directed by the departmental officers (Note : 1. While fabricating, necessary holes and bolt & nut shall be provided at no extra cost in the structural members. 2. In case, the specified MS section is not available in the market, the nearest alternative section may be used after approval of the Engineer). |
| 7 | Providing and fixing Double legged Scaffolding (Cup Lock type) to the required height made with 40mm dia. M.S. Tube @ 1.5m centre to centre, horizontal & vertical tubes joining with cup and lock system with M.S. Tubes, M.S. rube chillies, M.S. Clamps and M.S. Staircase system in the scaffolding for working platform. The scaffolding system shall be stiffened with bracings, runners connection with the buildings etc., wherever required for attending building repair works and inspection of work at requiredlocation with essential safety features for the workmen including all materials, labour, tools, equipments, etc., complete. |
| 8 | Dismantling and removal of Reinforced Cement Concrete (RCC) above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 9 | Providing and laying Plain Cement Concrete 1:1.5:3 (One part of cement, One and a half parts of M. Sand (Crushed Stone Sand) & Three Parts of graded stone aggregate (i.e.) 2 parts of 20mm nominal size graded metal & 1 part of 10mm nominal size graded metal) for RCC works using 20 mm nominal size graded metal including mixing, laying, levelling, consolidation, finishing and curing etc., complete complying with AISS and as directed by the departmental officers. |
| 10 | Providing and fixing sheet glass 5.5 mm thick bedded in putty and fixed with wooden beadings including all materials, labour, putty, nails, etc., complete complying with AISS and as directed by the departmental officers. |
| 11 | Dismantling and removal of Brick Masonry work (BW) in Cement Mortar above G.L. upto floor two level including stacking of serviceable materials and disposal of unserviceable materials within a lead of 100 m including all labour, tools, equipments, transport, fuel, etc., complete complying with AISS and as directed by the departmental officers. |
| 12 | Brick work in Cement Mortar 1:5 (M. Sand (Crushed Stone Sand)) ( One cement, five M. Sand (Crushed Stone Sand)) using chamber burnt bricks for walls in Ground Floor of the building including cost of all materials, labour, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 13 | Plastering the Brick work 15 mm thick in Cement Mortar 1:5 (Plastering Sand (P-Sand)) (One cement, five Plastering Sand (P-Sand)) for all faces of walls (even and uneven) in all floors upto full height of the building including necessary scaffolding, racking of masonry joints, cleaning, curing etc., complete complying with AISS and as directed by the departmental officers. |
| 14 | Providing and fixing of glazed Aluminium Partition with Aluminium frame section (manufactured to relevant IS Specification) for vertical and bottom of size 65 X 38 X 2 mm, horizontal section of size 100 X 45 X 2 mm including providing 5.5 mm thick glass superior quality at middle portion and Novapan of 8 mm thick at top and bottom with necessary accessories like snap on beading (clips), cleat angles, fully threaded 75mm long metal screws, wooden plugs & metal screws etc., including drilling holes in theconcrete / brick masonry etc., wherever required, all as directed at site of work including all materials, labour, tools, equipments, scaffolding, transport, fuel, etc., complete. Note: Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including using glazing clip, rubber beading for glazing and necessary screws, plugs etc., complete and as directed by the departmental officers. |
| 15 | Applying one coat of painting over previously painted steel truss surfaces with Aluminium paint of approved quality such as Asian, Berger, ICI and equivalent, including cost of paint, brushes, cleaning, scaffolding and labours etc., complete complying with AISS and as directed by the departmental officers. |
| 16 | Applying One coat of Red oxide primer over new steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool, scrapers and sand paper etc.,complete complying with AISS and as directed by the departmental officers. |
| 17 | Painting the steel surfaces with Two coats of Synthetic enamal paint of approved quality (excluding priming coat) on new steel and other metal surfaces with enamel paint, brushing, interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including all materials, labour, brushes, etc., complete complying with AISS and as directed by the departmental officers. |
| 18 | Painting ONE coat with Plastic emulsion of approved brand over OLD wall surfaces to give an even shade, after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. |
| 19 | Applying one coat of Alkali Resistant Primer and One coat of APEX - Exterior Emulsion Paint of approved colour and quality over the existing wall surface in all floors to give an even shade after thoroughly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand paperes smooth including all materials, labour, brushes, scaffolding, etc., complete complying with AISS and as directed by the departmental officers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender