Tender For Installation Of 1 Nos. Tubewell At Bapu Samaj Sewa Kendra, Panchkuian Road, New Delhi.
Tender Value
4.41 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
3 days left
EMD
8830
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of 1 Nos. Tubewell At Bapu Samaj Sewa Kendra, Panchkuian Road, New Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground levelRocky strata including Boulders150 mm -200 mm dia |
| 2 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge..a) 150 mm nominal size dia having minimum wall thickness 5.00 mm |
| 3 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/ plain bevel ended pipe (type A) of required dia, conforming to IS: 8110, of reputed and approved make, having wall thickness not less than 5.40 mm, including painted with outside surface with two coats of anticorrosive bitumestic paint of approved brand and manufacture, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer -in-charge.a) 150 mm nominal size dia. |
| 4 | Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine / medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. |
| 5 | Development of tube well in accordance with IS: 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. |
| 6 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 7 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia. |
| 8 | Providing, supplying, lowering, installing, testing and commissioning of 100 mm dia submersible pump set of approved make such as KSB Limited (Model: Cora 7C/17 or equivalent) comprising 3 HP, 2900 RPM submersible motor suitable for operation on 3 phase, 415 volts, 50 Hz A.C. supply, having 50 mm dia delivery outlet, complete with pump and motor assembly, suitable for clear water, conforming to the following duty conditions: Discharge – 125 LPM at 40 m head, Discharge – 105 LPM at 60 m head, Discharge – 85 LPM at 90 m head, including all necessary accessories required for proper functioning, testing and commissioning etc. complete as required. |
| 9 | Providing and laying of 3 core x 2.5 sq.mm flat type submersible cable, PVC insulated and PVC sheathed, with copper conductor, water proof, suitable for submersible pump operation, of approved make such as Finolex Cables Ltd / Netco or equivalent, conforming to relevant IS standards, including connection, testing, commissioning and making necessary joints, complete as required and as per direction of Engineer-in-Charge. |
| 10 | Providing and fixing M.S. clamp of required 50 mm dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. |
| 11 | Providing 50mm (Medium class) G.I pipe with threaded ends welded with G.I Flanges at both ends having semi-circular cut for protection of cable in 3.00 metre approx. length (lum sum) |
| 12 | Providing G.I Bend 90° (Medium) of 50mm dia. nominal bore. |
| 13 | Providing and fixing gun metal non- return valve of approved quality (screwed end) :50 mm nominal bore Vertical |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore |
| 15 | Providing and fixing free-standing type feeder pillar L.T. panel board (lockable type) having 7 enclosures, fabricated out of 1.60 mm thick M.S. sheet, of required size, complete with suitable size 40 × 40 × 5 mm M.S. angle iron frame, including making necessary cut-outs, drilling, welding, grouting on PCC foundation (if required), complete with two coats of synthetic enamel paint over a coat of red oxide primer, as required. The panel board shall be suitable for accommodating existing accessories such as starter(s), internal wiring, ammeter, voltmeter, energy meter, MCCB, changeover switch etc., including dismantling and refixing of existing accessories in the new panel, making proper terminations, earthing connections, interconnections with suitable size copper conductors, lugs and glands, complete with testing and commissioning etc. as required.The panel shall comprise of the following enclosures:a) One enclosure for housing energy meter.b) One enclosures for housing B.C.H. make 32 Ampere starters with accessories L & T cat No.( AUC00204000)/BCH make 40 Ampere ( AUC00204000 )manual change over switch handlec) one independent chamber for 3 to 7.5 HP submersible pump set, suitable for operation on 3-phase, 400/440 volts, 50 Hz A.C. supply, complete with all necessary electrical accessories, including the following: B.C.H. (Model CPPYNAKN*) / L&T make Direct-On-Line (DOL) submersible pump starter with inbuilt 32 Amperes MCB protection, having 16 Ampere contactor and overload relay of adjustable range 8.90 to 13.50 Amps, including providing and fixing suitable size copper conductors, lugs/thimbles, glands, proper earthing connections, mounting of starter in the chamber, making all electrical connections, testing and commissioning etc. complete, as required and as per directions of the Engineer-in-Charge. |
| 16 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :50 to 80 mm nominal bore |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work50 mm dia nominal bore |
| 18 | Providing and fixing Telemetric Digital water flow meter as per CGWA guidilines for 50mm dia pipe with facility of logging the data on the cloud server and measuring range of 0.2 to 12 m3 sec complete in all respect as per the satisfaction of engineer in charge. |
| 19 | Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. allcomplete, for all depths, as per direction of Engineer -in-charge.100 mm nominal size dia |
| 20 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.100 mm nominal size dia |
| 21 | Providing and fixing Telemetric ground water level recorder for measuring depth upto 160 meter & 100 mmdia bore and specifications as per CGWA guidline including storage of data on cloud compelte in all respect as per the satisfaction of engineer in charge. |
| 22 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground levelAll type of soil.150 mm -200 mm dia Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender