Tender For Construction Of Baby Care Room (Child Carrying Women) And Up Gradation Of Ticket Booking Counter And Holding Place/ Seating Arrangement At Ruined Fort Kangra (H.P.)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Nov 2026
18 days left
EMD
75000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Baby Care Room (Child Carrying Women) And Up Gradation Of Ticket Booking Counter And Holding Place/ Seating Arrangement At Ruined Fort Kangra (H.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Sub Head and Item of Work |
| 2 | Provision for photograph documentation charges for execution of work. (Including GST) |
| 3 | Demolishing R.C.C. work manually including stacking of steel bars and disposal of unserviceable material within 50 meters lead(Including GST) |
| 4 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead(Including GST) |
| 5 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chow hat, architrave, hold fasts etc. complete and stacking within 50 meters lead(Including GST) |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains(notexceeding1.5minwidthor10 sum on plan),including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (Including GST) |
| 7 | Providing and laying cement concrete in1:3:6 (1 Cement:3coarsesand(zone-III)derived from natural sources:6 graded stone aggregate 20mm nominal size derived from natural sources) (Including GST) |
| 8 | Random rubble masonry with hard stone in foundation and plinth including level in gap with cement concrete 1:6 :12 (1 cement: 6 coarse sand, 12 graded stone aggregate 20mm nominal size )up to plinth level(Including GST) |
| 9 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources:4 graded stone aggregate 20mm nominal size derived from natural sources) (Including GST) |
| 10 | Supplying and filling in plinth with sand under floors including watering ramming, consolidating and dressing complete. (Including GST) |
| 11 | Coursed rubble masonry with hard stone (first or second sort) in super structure above plinth level and up to floor five level, Masonry work (first sort), in cement mortar 1:6 (1 cement :6 coarse sand) (Including GST) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, presumes and cantilevers(Including GST) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bar subgrade Fe-500 Dor more(Including GST) |
| 14 | Re enforced cement concrete work in beams, suspended floors, roof shavings lope upto15°landings,balconies, shelves, hajjes, lintels, bands, plain window sills, stair cases and spiral staircases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with1:1.5:3 (1 cement:1.5coarsesand (zone-III)derived from natural sources:3 graded stone aggregate 20mm nominal size derived from natural sources) (Including GST) |
| 15 | 18mmcementplasterintwocoatsunderlayer12mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster1:6 (1 cement : 6 fine sand) (Including GST) |
| 16 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement [email protected]/sum including grouting the joints with white cement and matching pigments etc., complete. SizeofTile600x600mm (Including GST) |
| 17 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugsor with dash fasteners of required die & length (hold fast lugs or dash fastener shall be paid for separately) (Including GST) |
| 18 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross band sand face veneers on both faces of shutters. (Including GST) |
| 19 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface top repair the surface even and smooth complete. (Including GST) |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work(two or more coats) over and including water thinnable priming coat with cement primer(Including GST) |
| 21 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (Including GST) |
| 22 | 40 mm thick rubbed stone flooring over 20 mm (average)thickbaseofcementmortar1:5(1cement:5 coarse sand)withjoints3mmthick,sidebutteredwith cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar(Including GST) |
| 23 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (Including GST) |
| 24 | Providing and fixing internal wall panels on Light gauge steel frame work with 12.5 mm thick gypsum plasterboardconformingIS2095:2011fixedoncement board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60 cm c/c of approved make, Screws shall be of counter sun krib head of 1.60 mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish(Including GST) |
| 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats)over and including water thin able priming coat with cement primer.(Including GST) |
| 26 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm center to center, one flange fixed to the ceiling with dash fastener 12.5 mm dia x50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels45x15x0.9mmrunning at the spacing of 1200mmcentreto center, to which the ceiling section0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm center to center, shall be fixed in a direction perpendicular to G.I. inter media the channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of crawl plugs at 450 mm center, with25mm long drywall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60(Including GST) |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work (Including GST) |
| 28 | Provision for Providing and Fixing 15mm Foam Aluminum Foil for under roof insulation(Market rate) (Including GST) |
| 29 | Providingandfixing4mmthickAluminiumComposite Panel (ACP) roofing/cladding, consisting of 0.50 mm aluminum skins on both sides with polyethylene/mineral core, PVDF/FEVE coated external surface, fixed over properly designed MS/aluminum supporting frame work with self-drilling SS screws/rivets, EPDM washers, aluminum joint profiles, compatible weather-grade sealant, necessary flashing, edge/corner profiles and all necessary accessories, including cutting, drilling, jointing, sealing, labour, scaffolding and T&P, complete as directed by Engineer-in-Charge (Including GST) |
| 30 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (Including GST) |
| 31 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. (Including GST) |
| 32 | Required of necessary Electric fitting articles for baby care room, holding are and booking counter (Market Rate) (Including GST) |
| 33 | Required of necessary plumbing articles for baby care room, holding are a and booking counter(Market Rate) (Including GST) |
| 34 | Required of necessary essential articles for baby care room,holding are a and booking counter (Market Rate) (Including GST) |
| 35 | Repair and maintenance of existing water cooler(Including GST) |
| 36 | Providing and fixing fly proof galvanized M.S. wire gauge to window sand clerestory windows using wire gauge with average width of aperture1.4mm in both directions with wire of dia 0.63 mm all complete(Including GST) |
| 37 | Lettering with black Japan paint of approved brand and manufacture(Including GST) |
| 38 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (Including GST) |
| 39 | Providing, supplying and installing Mobile Charging Stand for visitors, complete with multiple USB/mobile charging ports, suitable power supply unit, necessary electrical wiring, switches, protective enclosure, mounting/supporting arrangement and all accessories, complete (Market rate ) (Including GST) |
| 40 | Providing and fixing aluminum work for doors, windows, ventilator sand partitions with extruded built up standard tubular sections/appropriate Z section sand other sections of approved make conforming to IS:733 andIS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be Paid for separately) (Including GST) |
| 41 | Providingandfixing12mmthickprelaminatedparticle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side(Including GST) |
| 42 | Two track two panels sliding door with Aluminum channel for roller track, wool pile, zinc alloy (zamak) powder coated handle one very panel along with multi-point locking system, adjustable nylon rollers with SS 304 body Using R3 series with frame (55mm&above) (40mm&above) & sash (30mm & above)x(74mm & above). (Height upto 2.5 meter) (Including GST) |
| 43 | Providing and fixing stainless steel (Grade304)railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature(wherever required)and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless Steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (Including GST) |
| 44 | Pointing on stone work with cement mortar1:3(1 cement : 3 fine sand) Raised and cut pointing. (Including GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender