Tender For special Repairs To Bungalow No P-03 In North Complex And Bldg No T-236 At Ima Dehradun.
Tender Value
46.27 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
1 days left
EMD
92600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Bungalow No P-03 In North Complex And Bldg No T-236 At Ima Dehradun.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 2 | M&L for double charged Vitrified ceramic coloured tiles 10mm thick (Square or rectangular) polished, area of each tile n exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 3 | M&L for Glazed ceramic coloured tiles of size 450x300x7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same colour grout to match including rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 for receiving wall tiles and dismantling of existing tile complete all as directed. |
| 4 | S&F in repair single piece Vitreous china any shade cascade floor mounted single piece water closet P/S trap with dual flush for UF soft close slim seat cover, hinges fittings, conversion bend, fixing accesories complete all as specified and directed. Make : Jaquar Cat part No OPS-WHT15753NS250UFSMZ/Cera cat part No S1013105/Kajaria cat part No KB-3007 |
| 5 | S&F Vitreous china full set pedestal type wash basin, white, flat back, size 585x450x220mm including bracket, CP brass 32m dia coupling, waste pipe fixed in repair complete all as directed. Make : Jaquar Cat part No Jaguar FLS-WHT-5801 & 5301/Cera cat part No S2040112 & S2090107 or equivalent |
| 6 | S&F in repair PVC connection 15 mm size with brass nuts of length 450 mm complete all as specified and directed. |
| 7 | S&F in repair for bevelled edge looking mirror of of any size, selected quality glass with design as apporoved by GE, frame less and fixed to chromium plated brass screws and studs complete all as specified and directed. |
| 8 | S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. |
| 9 | S&F in repair Corner glass shelf assembly with bracket complete all as specified and as directed. |
| 10 | S&F in repair stainless steel toilet paper holder with flap guard fixed to walls with chromium plated brass screws. |
| 11 | S&F in repair stainless steel soap dish holder fixed to walls with chromium plated brass screws. |
| 12 | S&F in repair soap dispenser fixed to walls with chromium plated brass screws. |
| 13 | S&F in repairs CP brass hot & cold single lever basin mixer with 450mm long braided hoses cast copper alloy with centre hole for WHB complete all as directed by Engineer-in-charge. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 14 | S&F in repairs CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flangs in complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 15 | S&F in repairs CP brass hot & cold 15mm dia sink mixer swinging spout (wall mounted model) with connecting legs & wall flanges complete all as specified. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 16 | S&F double bowl Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter on to dwarf wall or inclulding fixing cantilever brackets and connecting union to pipe of standard size fixed in repair complete all as specified and directed. |
| 17 | S&F in repairs brass 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series. |
| 18 | S&F in repairs CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis series |
| 19 | S&F in repair CP brass overhead shower square fancy type 300x300 mm with extension CP Arm pipes complete all as specified and directed. |
| 20 | S&F in repair brass CP Health faucet telephonic type with 1.5m long flexible CP pipe complete all as specified and directed. |
| 21 | S&F in repair brass chromium plated towel rail, 600mm long complete all as specified and directed. |
| 22 | S&F in repair brass chromium plated towel ring fixed with screw in wall complete all as specified and directed. |
| 23 | S&F in repair brass chromium plated towel rack with hooks, 60cm long between flanges complete all as specified and directed. |
| 24 | S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed. |
| 25 | S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors fixed in repair complete all as specified and directed. |
| 26 | S&F PVC bends of 75 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed. |
| 27 | S&F PVC bends of 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed. |
| 28 | S&F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed. |
| 29 | S&F in repair stainless steel Grating square fitting of size 150mm made in two parts for smell and mosquito proofing for waste pipe complete all as specified and directed. |
| 30 | S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including cutting, chasing in, taking up or down existing steel tubing pipe complete all as directed. |
| 31 | S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 32 | S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 15/20mm dia PTMT ball valve complete set and dismantling of existing unserviceable tank and removing from site complete all as specified and directed |
| 33 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base filling and mass concrete complete finished even and fair incl demolition of PCC all as specified and directed. |
| 34 | M&L Drapery rod in any length, high strength stain less steel pipe having outer dia 25-28mm a pair of brackets & a pair of stainless steel finials, fixed in repair complete all as specified and directed. |
| 35 | S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc fixed in repairs including dismantling complete all as directed. |
| 36 | S&F Pre-painted colour galvalume aluminium Zinc coating AZ 150 GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges, gutter fixed in repairs complete all as directed by Engr-in-charge. |
| 37 | S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quality B) |
| 38 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red zinc oxide primer complete all as specified and directed |
| 39 | M&L for Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 40 | M&L french polishing on wooden surface of any discription width or girth including cleaning and preparing the surface including a coat of wood filler but one or more coat on old work incl complete removal of exiting paint complete all as specified and directed. |
| 41 | M&L for Rendering 15 mm thick in cement mortar 1:6 using coarse sand on brick or concrete surface finish even and fair finishing, curing scaffolding including taking down of existing cement plaster etc complete all as specified and directed. |
| 42 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of existing brick work complete all as specified and directed. |
| 43 | Demolition of cement concrete in ground floor and paving nexc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 44 | M&L for 75mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc concrete complete all as specified and directed |
| 45 | M&L for 40mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement complete all as specified and directed. |
| 46 | M&L for Complete removing of existing treatment from wall / ceilling by using mechanical sander/grinder complete all as specified and directed. |
| 47 | M&L for applying 3mm thick damp proof wall care putty, Preparation of puttied wall/ceiling by mechanical sander/grinder and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. Note : 1. The work pertaining to periodical services shall be executed from authorized applicator as approved by GE.2. After completion of distempering, contractor have to carry out following work whose rates to be included while quoting the rates. No extra payment will be done on this account and damage if any to be borne by the contractor :-(i) cleaning of floor with floor cleaner and stain should be removed from wall/door/window. (ii) cleaning of fan after removing and refixing the same. (iii) shifting of furniture. |
| 48 | M&L for Preparation of surfaces of wall / ceiling and applying two coats of weather coat exterior paint over a coat of Alkali resistant primer and over a coat of 3mm thick white cement base water proof putty including sanding/grinding complete all as specified and directed (work to be carried upto a height of 7.5m). Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glo/Shalimaar Paints weatherPRO+ |
| 49 | S&F Door seal bottom for insect prevention with Carbon metal seal strip with rubber insulation, Anti rust, weather proof, soundproof for all door type, brown colour fixed to door with carbon screws complete all as directed. |
| 50 | M&L in repair for 18/19mm thick both side prelaminated colour WPC board for cup board shutter and frame & fixed at site including a pair of Auto closing hinges 35 mm of 0 crank (KH-001) openable at 110 degree/Continuous (piano) hinges stainless steel, bright finish or electrogalvanised width of flap 30 mm, magnet catcher and stainless steel handles of 150 mm size complete all as specified and directed. |
| 51 | S&F Chromium plated stainless steel wire basket (storage, cup and saucer, Plate, cutlery, Grain Trolley, Bottle pull out) pull out type Grade 304 with necessary fixing clips including ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity of 50 kgs etc complete all as specified and directed. |
| 52 | M&L for 18-20mm thick zed black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) pointing in white cement (1:2) using marble dust and half rounding of exposed edges including taking down of existing shelf complete all as specified and directed. |
| 53 | M&L for PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in surface channels and drains including Desludging/ cleaning of open drain of any depth by mechanically means and burring the sludge into the ground complete all as specified and directed. |
| 54 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 55 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 56 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length including door stopper complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 57 | S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 58 | M&L 35mm thick factory made solid WPC (Wood plastic composite) both side prelaminated gauged door shutter (single door piece to be used) consisting of density 650 kg/cum panelled with SS mosquito wire mesh and XTN aluminium mesh for additional strength and safety purpose in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufacturer instruction complete all as specified and complete all as specified and complete all as specified and directed. |
| 59 | S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed. |
| 60 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed |
| 61 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed |
| 62 | S&F aluminium powder coated frame for fixed partition of section 47.62mm x 44.45x1.6 mm thick of AC panel/shutter glazed with tinted glass (Modi Guard) 5mm thick fixed with rubber gasket and aluminium strips as per standard method also rubber gasket at frame so as to make air tight all as per IS 737-1986 complete all as specified and directed. |
| 63 | M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one Nos wire gauged shutter sliding type, with aluminum sections as per Series-B (18mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 6mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type 2 Nos aluminium handle of size 75mm and locking system including aluminium grill of 5mm thick, average width of aperture 50mm and SS wire cloth 0.46mm dia of wire and 1.40 aperture and provision of openable space for AC (wherever required) with 04 Nos of tower bolt etc complete all as specified and directed. |
| 64 | S&F Steel ventilator factory made with centre hung shutter double rebated (measured as one) including wire mesh, glass, hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed. |
| 65 | S&F multi purpose wall mounted Cabinet Mirror ABS body of size 450x600 mm for bathroom fixed with screw on wall complete all as directed. |
| 66 | M&L for welded steel wire fabric weight n exc 4kg/sqm fixed/welded to wood or steel members complete all as directed |
| 67 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed |
| 68 | S&F Butt hinges, 150 mm long, extruded stainless steel with galvanised mild steel hinge pin anodised and fixed complete all specified as directed |
| 69 | S&F 300mm long Stainless steel, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed |
| 70 | S&F 250mm extruded Stainless steel handles, fabricated type, complete all as specified and directed. |
| 71 | S&F 200mm long Stainless steel, barrel tower bolts of extruded section complete all as specified and directed |
| 72 | M&L for PCC 1:3:6 Type C-2 using 40mm graded crushed stone aggregate as in foundation of man hole incl demolition of existing cement concrete of any description complete all as specified and directed. |
| 73 | M&L for Cleaning the manhole up to 1.50m deep by rodding manually and removing the sludge from manhole and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed. |
| 74 | M&L for Cleaning the sewage line up to 150mm dia by rodding manually and removing the sludge and completely cleaning by flushing with water etc complete , sludge shall be buried into ground and covered with the enough quantity of lime to stop the foul smell complete all as specified and directed. |
| 75 | Excavation in trenches n. exc 1.5m wide and n. exc 1.5 m depth for foundation or for shaft etc n. exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/ loose soil complete all as specified & directed. |
| 76 | Returning, Filling in, with excavated soil including spreading leveling, watering and well ramming in layers not exc 25cm thick in soft/ loose soil complete all as spesified & directed. |
| 77 | Removing excavated material exc. 50 m but n exc. 250 m and depositing where directed at a level n exc 1.5m above the starting point |
| 78 | M&L in repair for DWC (Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid as required complete all as specified and directed. |
| 79 | S&F in repair 1mm thickness of lath Steel rolling shutters, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type. |
| 80 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear mtr including drilling and plugging holes etc. in apron. |
| 81 | S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605x 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia wire including taking down existing boards complete all as directed. |
| 82 | M&L for PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/ benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work incl demolition of existing cement concrete of any description complete all as specified and directed. |
| 83 | M&L for 300x300x25mm heavy duty Chequered cement concrete tile made with rubber moulds of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. |
| 84 | M&L for Rubberised precast prepolished coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 85 | M&L for fibre reinforced liquid applied elastomeric waterproofing membrane PU-Acrylic Hybrid Polymer on door/window chajjas, Roof, wall etc and applying a coat of PU all as directed by Engr-in-charge (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). |
| 86 | M&L for R.C.C 1:2:4 nominal mix type B1 (20mm graded agg) Slabs supported on walls, beams and columns in floors, roofs, canopies, deck slabs and in shelves and the like complete all including demolition of existing slabs and necessary formworks. |
| 87 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 88 | S&F Stainless steel plate rack of size 24 inch X 24 inch X 10 inch complete all as directed. |
| 89 | M & L for Roof treatment by applying a coat of cold applied oil based bituminous primer over cleaned surface @ 0.50Kg/Sqm, and laid 3mm thick APP modified five layer polymeric membrane, minimum weight not less then 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer's instructions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves over 50mm thick 1:3 screed bed & make good in cement mortar 1:3, finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign materials by wire brushing, removing and refixing of water tanks, cleaning roof surfaces with water and removal of spoil out side the defence premises, complete all as specified and directed. Note :- Work shall be executed by authorised applicator of manufacturer. |
| 90 | M&L for 6mm thick asbestos cement plain building board, fixed to timber and iron frame work with screw including dismantling of existing board complete all as directed. |
| 91 | M&L for obliterating old writing of any description, n exc 01 sqm with black paint in the form of diamond shape of size not exc 30x30cm and writing letters or figures (Block, Roman Italic or Indian), stops, commas, short lines, dashes, hyphens, brackets etc minimum of 10 cm height (total letters not exc 06 Nos) colour as decided by Engr -in charge complete all as specified and directed. |
| 92 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 93 | M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 94 | M&L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth (without using extra cement) complete all as specified and directed. |
| 95 | M&L for preparation of newly plastered surface of walls including corners and applying two coats of OBD over applying of 1-2 mm thick wall care putty and a coat of primer finish wall surface even & smooth complete all as specified and directed. |
| 96 | M&L for preparation of newly plastered surfaces of walls and applying two coats of weather coat exterior paint over a coat of primer and over a coat of 1-2 mm thick external wall care putty including sanding/grinding complete all as specified and directed. (Work to be carried upto a height of 7.5m). Make : Asian paints Apex (Ultima)/Berger Paints weather coat Glow/Shalimar Paints weather PRO+ |
| 97 | Dismantling existing timber scantling in any position complete all as specified and directed. |
| 98 | S&F for stainless steel Butt Hinges 100 mm fixed to steel/wooden shutters with stainless steel screws complete all as specified and directed. |
| 99 | S&F for stainless steel barrel tower bolts 150 mm size fixed with stainless steel screws complete all as specified and directed. |
| 100 | S&F for 150 mm size solid in one piece stainless steel handles fixed with stainless steel screws complete all as specified and directed by Engr-in-Charge. |
| 101 | S&F for stainless steel sliding door bolts of length 250 mm size and fixed with stainless steel screws complete fixed in repair complete all as specified and directed. |
| 102 | M&L for vitrified ceramic light shade tiles of size exc 0.42 sqm but nexc 1.00 sqm and 10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar (1:6) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 103 | M&L for vitrified ceramic light shade tiles of size exc 0.42 sqm but nexc 1.00 sqm and 10 mm thick, in skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in cement mortar (1:4) and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 104 | M&L for machine cut Kota stone 20 to 25 mm thick in floorings over cement screed base 20 mm thick in CM 1:4 laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing floor incl demolition complete all as specified and directed. |
| 105 | M&L for machine cut Kota stone 20 to 25 mm thick in skirtings, dado and pillar over cement screed base 10 mm thick in CM 1:3 laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and mirror polishing to be matched with existing floor incl demolition complete all as specified and directed. |
| 106 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed. |
| 107 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern) white including seat cover with necessary PVC pipe fittings complete all as specified and directed. |
| 108 | S&F in repair Vitreous china wash basin, white, flat back, size 550x400mm including bracket waste pipe and coupling complete all as specified and directed. |
| 109 | S&F in repair PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe complete all as specified and directed. |
| 110 | S&F in repair Viterous China urinal half stall type white including brass CP spreader, waste pipe etc. complete all as specified and directed. |
| 111 | S&F in repair brass CP 15mm bore pillar tap fancy type with aerator complete all as specified and directed. Make : Jaquar Opal Prime Series/ Cera Ruby series/Somany Bellis Series |
| 112 | M&L in repair 600mm X 450mm bevelled edge mirror of selected quality glass, frame less and fixed to chromium plated brass screws complete all as specified and directed. |
| 113 | S&F in repair PVC bends fitted with oval access doors 75/100 mm dia any radius diminishing pieces or tapers complete all as specified and directed. |
| 114 | S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia and dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 115 | S&F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of 20 mm bore complete all as specified and directed. |
| 116 | M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for flat fair finished surfaces of concrete complete all as specified and directed. |
| 117 | M&L for 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) pointing in white cement (1:2) using marble dust and half rounding of exposed edges including taking down of existing shelf complete all as specified and directed. |
| 118 | M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floors complete all as specified and directed. |
| 119 | M&L for 100 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floors/sub base etc finished even and smooth including demolition of existing old concrete complete all as specified and directed. |
| 120 | M&L for capsule pattern fully vitrified coloured tiles 9 to 10mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 121 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. |
| 122 | Taking down existing old Exhaust fan and deposit to MES yard of any size and capacity all as directed. |
| 123 | Taking down existing old Geyser deposit to MES yard of any size and capacity all as directed. |
| 124 | Taking down existing old U/S main switches, Sheet metal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed. |
| 125 | Taking down existing ceiling fan of any capacity and make serviceable by replacing unsv parts and preparation of old painted surface body and blades of ceiling fan of any capacity ,cleaning foreign material ,filling cavaties etc and painting with one coat of synthetic enammeled paint by spray painting and marking MES No. with paint and kept in safe custody and refixing at site after complition of bldg. work. |
| 126 | Taking down old unsv T/L of any size and capacity all as directed. |
| 127 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size as directed. Please Enable Macros to View BoQ information |
| 128 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender