Tender For Provn Of Certain Storage Accn And special Repair To Certain Bldgs At Dawar Under The Aor Of Ge 874 Ews.
Tender Value
40.10 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
9 days left
EMD
80200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Storage Accn And special Repair To Certain Bldgs At Dawar Under The Aor Of Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Surface dressing n. exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5m in depth and 1.5m in width and getting out in hard dense soil complete all as specified and directed. |
| 3 | M&L for providing cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete and filings complete all as specified and directed. |
| 4 | M&L for form work to side of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed. |
| 5 | M&L for form work to side of sides and soffits of floor or roof beams, beam haunching’s, girders, bressummers, lintels, and similar work complete all as specified and directed. |
| 6 | M&L form work to side of columns and similar work complete all as specified and directed. |
| 7 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed. |
| 8 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed. |
| 9 | M&L for providing reinforcement cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and directed. |
| 10 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed. |
| 11 | M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in in stirrups, spacers and binders complete all as specified and directed. |
| 12 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 13 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid separately. |
| 14 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | Supply only liquid water proofing compound complete all as specified and directed. |
| 16 | M&L for Preparation of new plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed. |
| 17 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 18 | S&F mild steel as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 19 | S&F Mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 20 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 21 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 22 | M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed. |
| 23 | M&L for hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed. |
| 24 | M&L 75mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) for floor sub base complete all as specified and directed. |
| 25 | M&L providing 25mm thick cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate), as in sub base in floor/paving etc complete all as specified and directed. |
| 26 | M&L machine cut kota stone flooring 20-25mm thick over 20mm thick cement screed (1: 6) base laid and jointed with grey cement slurry mixed with pigment match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 27 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 28 | S&F 2nd class soft wood plain solid straight chowkats and frames wrought framed including holdfast, rebated on the solid complete all as specified and directed. |
| 29 | S & F 35 mm thick second class soft wood, plain framed, panelled shutters (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density wood particle board with commercial face veneers. complete all as specified and directed. |
| 30 | S & F glazed & skeleton shutters 30mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (b) fitted to chowkhats complete all as specified and directed. |
| 31 | M&L for 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exceeding 0.5 Sqm in each panes complete all as specified and directed. |
| 32 | S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and directed. |
| 33 | S&F 75 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 34 | S&F aluminium anodised barrel tower bolt of extruded section 150mm length complete all as specified and directed. |
| 35 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 36 | S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed. |
| 37 | S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed. |
| 38 | S&F Hook & Eye for gates/shutters 100mm long complete all as specified and directed. |
| 39 | S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 40 | S& F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm complete all as specified and directed. |
| 41 | M&L for preparation of newly un treated surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed. |
| 42 | S&F 20mm thick 2nd class softwood boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed. |
| 43 | M&L preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed. |
| 44 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed. |
| 45 | Removing excavated material (soil) n. exc 50m and deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 46 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as specified and directed. |
| 47 | M&L cement concrete (1:3:6) type C-2, using 40 mm gde stone aggregate as in foundation, filling and mass concrete in foundation type complete all as specified and directed. |
| 48 | M&L for 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed. |
| 49 | M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 50 | Earth work in all kind of soil excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed. |
| 51 | M&L for Walling of random rubble masonry uncoursed, well bonded , bedded and solidly hearted built in CM 1:4 complete all as specified and directed. |
| 52 | M&L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces or surfaces of fair faces of brickwork and finishing even & smooth without using extra cement complete all as specified and directed. |
| 53 | M&L for cement concrete (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed. |
| 54 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds, mitred /stopped ends etc complete all as specified and directed. |
| 55 | Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed. |
| 56 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 57 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 58 | Hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 59 | S&F 03 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified. |
| 60 | M & L for 15mm thick rendering in Cement Mortar 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on brick or stone walls, complete all as specified and directed. |
| 61 | M & L for 10mm thick rendering in Cement Mortar 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth without using extra cement, including taking down cement or cement lime plaster on brick or stone walls, complete all as specified and directed. |
| 62 | M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper complete all as specified and directed. |
| 63 | M&L for preparation new undecorated surface of walls and applying one coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 64 | Dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises. complete all as specified and directed. |
| 65 | Demolition of cement concrete un reinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 66 | M&L Glazed ceramic coloured tiles of size 300x200 and 7mm thick, as in vertical surface such as in skriting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 67 | M & L for Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed. |
| 68 | S&F in repair PVC connection 15mm dia and 450mm long with PTMT nuts and washer complete all as specified and directed. |
| 69 | S&F in repair bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed. |
| 70 | S&F in Repair Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and directed. |
| 71 | S&F in Repair 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part -I |
| 72 | S&F in Repair PTMT ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule 20mm dia complete all as specified and directed. |
| 73 | S&F in Repair 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed. |
| 74 | Taking up or down 20mm dia GI steel tubing and connections, complete all as specified and as directed. |
| 75 | Taking up or down 15mm dia GI steel tubing and connections, complete all as specified and as directed. |
| 76 | S&F in Repair steel water tubing of nominal bore dia 15mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 77 | S&F steel water tubing of nominal bore dia 20mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 78 | M&L for lagging to 20mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 along with chicken mesh wire netting 25 guage , 20 mm mesh fixed in repairs complete all as specified and directed. |
| 79 | S & F in Repair bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed |
| 80 | S&F in Repair 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and directed. |
| 81 | S&F in Repair for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 82 | S&F in Repair 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed. |
| 83 | S&F in Repair 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified. |
| 84 | S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. |
| 85 | S&F 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 86 | S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 87 | S&F in Repair PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr cap white with flush pipe & all fitting complete all as specified and directed. |
| 88 | S&F in Repair vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed. |
| 89 | S&F in Repair PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 90 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed. |
| 91 | Dismantling of boarding of any description fitten in any position with nails complete all as specified and directed. |
| 92 | M & L for Plain fillets of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section, clean swan, secured with nails IInd class soft wood complete all as specified and directed. |
| 93 | M&L plywood grade BWR type BB, 9 mm thick fixed with nails to timber frame work in ceiling complete all as specified and directed. |
| 94 | M & L for Plinth protection 50 mm thick in PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site. |
| 95 | Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work complete all as specified and directed. |
| 96 | M & L second class soft wood in scantling clean swan complete all as specified and directed. |
| 97 | M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing caping/ conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification including taking down old one, complete all as specified. |
| 98 | All as per item No 97 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board, complete all as specified and directed. |
| 99 | All as per item No 97 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on ind board. |
| 100 | All as per item No 97 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board. |
| 101 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 102 | S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed. |
| 103 | S & F switch socket combination 3 pin 5A, flush type complete all as specified and directed. |
| 104 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 105 | Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 106 | M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 107 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 108 | S&F 09W/10W Bulk head luminiares including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 109 | S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50HZ , RPM 1200, Copper winding of sweep 300mm, complete all as specified and directed. |
| 110 | Supply and fixing LED security light fitting for guard post, 60Watt 230 V AC for outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 111 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 2 way including blanking plate as required complete all as specified and directed. |
| 112 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 113 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed. |
| 114 | S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 115 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed. |
| 116 | M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 117 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 10 sq. mm nominal cross section in service connections complete all as specified and directed. |
| 118 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 2 core 16 sq. mm nominal cross section in service connections complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender