Tender For Comprehensive Maintenance Of Map, Offrs Md Accn Incl Wks Of B/R And E/M Nature ( Internal And External ) At Cme Under Ge (Cme) Khadki (8735/E8)
Tender Value
40 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
14 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Maintenance Of Map, Offrs Md Accn Incl Wks Of B/R And E/M Nature ( Internal And External ) At Cme Under Ge (Cme) Khadki (8735/E8)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling water tanks and removing to store capacity exc 500 & n.exc 1000 ltrs complete all as specified and directed by Engineer-in-charge. |
| 2 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, Capacity of tanks exc 500 ltrs and not exc 1000 ltrs etc. complete all as specified and directed by Engineer-in-charge. |
| 3 | S&F For 500 litre Capacity rotational moulded polyethylene water storage tanks, ISI marked, cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-charge. |
| 4 | S&F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in bore dia of 15mm pipe complete all as specified and directed by Engineer-in-charge. |
| 5 | All as per item No 4 above but 20 mm dia pipe as in repairs complete all as specified and directed by Engineer-in-charge. |
| 6 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone, concrete walls / slab complete all as specified and directed by Engineer-in-charge. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge. |
| 8 | Demolition of cement concrete(unreinforced ) in ground floors and pavings not exceeding 15cm thickness(below or above ground level) complete all as specified and directed by Engineer-in-charge. |
| 9 | Material and labour for Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in subbase 25mm thick complete all as specified and directed by Engineer-in-charge. |
| 10 | M & L Plain Cement Concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base of floors 75mm thick all as specified and directed. Including demolition old concrete complete all as specified and directed by Engineer-in-charge. |
| 11 | M&L Plain Cement Concrete 1:3:6 type C-2(40mm graded aggregate) as in floors plinth protection, path etc 75mm thick smooth finished surface without using extra cement incld forming 10 mm wide joints @ 1.50m c/c and filled with bitumen complete all as specified and directed by Engineer-in-charge. |
| 12 | M&L for glazed ceramic coloured tiles in vertical surface 350mmx450mmx7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed by Engineer-in-charge. |
| 13 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge. |
| 14 | M & L For vitrified Ceramic tiles light shade 9 mm to 10 mm thick (square/ rectangular) polished, area of each tiles exceeding not exc 0.36 sqm set and jointed in floors in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engineer-in-charge. |
| 15 | M&L for 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge. |
| 16 | All as per item No 15 above but on vertical surface such as skirting , dado etc but including 10 mm thick rendering in CM 1:4 complete all as specified and directed by Engineer-in-charge. |
| 17 | Dismantling stone slab laid bedded and pointed in cement mortar of any description or thickness in floor aprons etc complete all as specified and directed by Engineer-in-charge. |
| 18 | M&L 18-20mm thick granite (of any type) work, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge. |
| 19 | M&L machine cut cuddappah stone slab 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-charge. |
| 20 | S&F in repair stainless steel sink , made out of 1.00 mm thick sheet for kitchen with plug, washer pipe cast iron cantilever brackets, connecting union overall size 495x420mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engineer-in-charge. |
| 21 | Taking up or down 15mm bore steel water tubing & connections, including cleaning for refixing or offering credit as per schedule of credit complete all as specified and directed by Engineer-in-charge. |
| 22 | All as per item No 21 herein before but 20mm bore complete all as specified and directed by Engineer-in-charge. |
| 23 | Supply and fixing 15mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 24 | Supply and fixing 20mm bore medium grade galvanised steel water tubing with all fitting & fixed complete to walls or ceiling or laid in floors complete all as specified and directed by Engineer-in-charge. |
| 25 | Refixing 15mm bore old steel water tubing & connection in new or old position of wall, ceiling, floor etc complete all as specified and directed by Engineer-in-charge. |
| 26 | All as per item No 26 here in before but 20mm bore complete all as specified and directed by Engineer-in-charge. |
| 27 | S&F in repairs under counter type wash basin vitreous china coloured incl,15mm dia, Polythene connection, 32mm dia chromium plated (CP) waste coupling, chain and plug waste fitting union and 32 mm dia PVC waste pipe 90cm long and all necessary inlet outlet connections etc complete all as specified and directed by Engineer-in-charge. |
| 28 | S&F in repairs white vitreous China wash down water closet (pedestal pattern) , PVC 10 litres valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle brackets, PVC flush pipe of polyethylene of low or high level cistern 32 mm dia, Plastic water closet seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections, Toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engineer-in-charge. |
| 29 | Supply and fixing in repair 10 litre capacity PVC valveless , syphonic action type flushing cistern, low level, white, with inlet ball valve, float and handle including bracket and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed by Engineer-in-charge. |
| 30 | Supply and fixing in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shanks and flynuts, screwed for iron pipe complete all as specified and directed by Engineer-in-charge. |
| 31 | Supply and fixing PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engineer-in-charge. |
| 32 | Supply and fixing in repair 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge. |
| 33 | Supply and fixing in repairs 15 mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 34 | S&F in repair 15mm dia stop valve chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union complete all as specified and directed by Engineer-in-charge. |
| 35 | S&F Health faucet (ABS Body) mild steel CP suitable for 15 mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook incl making connections and fixed in position complete all as specified and directed by Engineer-in-charge. |
| 36 | Demolition of brick or stone/boulder masonry , built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-charge. |
| 37 | M&L Precast solid block masonry of block 1:3:6 type C-1 wall exceeding 10 cm in width and built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge. |
| 38 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. |
| 39 | Material and labour preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over one coat primer on walls complete all as specified and directed by Engineer-in-charge. |
| 40 | Material and labour Plain Cement Concret 1:2:4 type B-1(Using 20mm graded crushed stone agg) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded for chamfered angles and throating, incld necessary form work complete all as specified and directed by Engineer-in-charge. |
| 41 | S&F in repair 75mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engineer-in-charge. |
| 42 | All as per item No 41 above but 110mm complete all as specified and directed by Engineer-in-charge. |
| 43 | Supply and fixing in repair 75mm PVC(SWR) bend any radius complete all as specified and directed by Engineer-in-charge. |
| 44 | All as per item No 43 above but 110mm dia complete all as specified and directed by Engineer-in-charge. |
| 45 | Supply and fixing in repair 75mm PVC(SWR) junction single(single T) equal or unequal complete all as specified and directed by Engineer-in-charge. |
| 46 | All as per item No 45 above but 110mm bore of pipe complete all as specified and directed by Engineer-in-charge. |
| 47 | Material and labour in repair 75mm PVC(SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-charge. |
| 48 | All as per item No 47 above but 110mm complete all as specified and directed by Engineer-in-charge. |
| 49 | Supply and fixing in repair 75mm (SWR) vent cowl complete all as specified and directed by Engineer-in-charge. |
| 50 | All as per item No 49 above but 110mm complete all as specified and directed by Engineer-in-charge. |
| 51 | Supply and fixing in repair Brass chromium plated tubular towel rail, 20mm dia , D type 60cm long between flanges complete all as specified and directed by Engineer-in-charge. |
| 52 | S&F in repair 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-charge. |
| 53 | Supply and fixing in repair Brass chromium plated shower rose 125mm size with or without swivel joint any size incl fixing to steel pipe or union complete all as specified and directed by Engineer-in-charge. |
| 54 | Supply and fixing in repair Soap dish, SS, approximate size 160x 60x90mm fixed to plug with CP brass screw complete all as specified and directed by Engineer-in-charge. |
| 55 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-charge. |
| 56 | M&L for carrying out treatment to external walls by the following method:-(a) Taking down loose pointing cracks, vegetation growth moss etc and making good with cement mortar/cracks to receive the further water proofing treatment (b) Cleaning the stone surfaces with wire brush and washing down with water to make the surfaces dust free and allow the surface to dry.(c) Providing and applying WPT of external walls of stone masonry by applying two coats of water/solvent based silicon coating after cleaning the surfaces thoroughly and sealing all the pointing with cement and sand mortar mixed with WPT additive all as per the manufacturers specifications and direction of Engineer-in-charge. |
| 57 | M&L for providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed by Engineer-in-charge. |
| 58 | Taking down Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and directed by Engineer-in-charge. |
| 59 | Taking down Chowkats or Frames, exc. 1.50 Sqm but not exc 4 sqm Each with Shutters (without Taking Off Shutters from the Frames), complete all as specified and directed by Engineer-in-charge. |
| 60 | S&F 30mm thick flush shutter, solid core construction, with block board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed by Engineer-in-charge. |
| 61 | S& fixed 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed by Engineer-in-charge. |
| 62 | S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by Engineer-in-charge. |
| 63 | S&F PVC Solid Door Frame of Size 50X47mm made out of 5.0mm Plain Colour PVC Sheet Reinforced with Mild Steel Square Tube as specified Manufacturer’s Instructions complete all as specified and directed by Engineer-in-charge. |
| 64 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded Plain Colour PVC 'C' Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site as per Specifications and Drawings, complete all as specified and directed by Engineer-in-charge. |
| 65 | S&F stainless Steel Wire Cloth, 0.36mm nominal dia of Wire and average width of aperture 1.4 mm and fixed with Tinned Tacks of Mild Steel Wire Stapes, fixing etc, complete all as specified and directed by Engineer-in-charge. |
| 66 | All as per Item No 65 above but in repairs complete all as specified and directed by Engineer-in-charge. |
| 67 | S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed by Engineer-in-charge. |
| 68 | All as per Item No 67 above but in repairs complete all as specified and directed by Engineer-in-charge. |
| 69 | S&F in repair 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed by Engineer-in-charge. |
| 70 | All as per Item No 69 above but in repairs complete all as specified and directed by Engineer-in-charge. |
| 71 | S & F 150 mm Aluminium handles, cast type anodised complete all as specified and directed by Engineer-in-charge. |
| 72 | S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-charge. |
| 73 | S&F as in repairs aluminium anodised louvered ventilator with 4 mm thick pin headed glass and 100 mm wide glass strips, white framed and fixed with aluminium anodised frames etc including taking down existing old window of any description complete all as specified and directed by Engineer-in-charge. (Thickness of Aluminium section 2mm thick min). |
| 74 | S&F as in repairs for aluminium anodized three track sliding window with shutter with 4 mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing ,handle lock, etc rubber beading and glazing clips etc using following sections as given in 'JINDAL' catalogue including taking down existing old window of any description complete all as specified and directed by Engineer-in-charge. (Thickness of Aluminium section 2mm thick min). |
| 75 | S&F in repair 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on both faces; fixed with screws to timber frame work complete as in cupboard kitchen cabinet complete all as specified and directed by Engineer-in-charge. |
| 76 | M&L 12mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs as in cupboard, partition, kitchen cabinet complete all as specified and directed by Engineer-in-charge. |
| 77 | Resecuring or easing & adjusting , without taking down of shutter in the same opening of any description and size complete all as specified and directed by Engineer-in-charge. |
| 78 | M&L cover fillet (lipping) of tempered hard board 40mm wide, 6mm thick and fixing with screw complete all as specified and directed by Engineer-in-charge. |
| 79 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps (when open) in 30mm complete all as specified and directed by Engineer-in-charge. |
| 80 | S&F in repairs 40mm dia cupboard knobs fixed with nut, screws and washers of mild steel bright finish complete all as specified and directed by Engineer-in-charge. |
| 81 | S&F in repairs 150mm hasp and staple, aluminium anodised , wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and directed by Engineer-in-charge. |
| 82 | M&L Welding in repairs n. exc 2.5cm in length to old doors for fixing hinges, tower bolt, sliding door bolt, handles, locking system, etc with thickness n.exc 6mm complete all as specified and directed by Engineer-in-charge. |
| 83 | S & F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engineer-in-charge. |
| 84 | M&L sand filling under floors or in foundation including watering as required complete all as specified and directed by Engineer-in-charge. |
| 85 | M & L machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish, colour shadecomplete all as specified and directed by Engineer-in-charge. |
| 86 | M&L for Plain Cement Concrete 50mm thick 1:3:6 type C-1(using 20mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-charge. |
| 87 | M&L for repairing steel gates, doors with frame by removing all the rusted members, metal sheet and replacing by new members to match the existing gates, providing necessary locking arrangements, welding in repairs for fixing hinges, tower bolt, sliding door bolt, handles, locking system, etc including painting the gate complete all as specified and directed. size of gate Exc 1.50 sqm but n.exc 4.00 sqm complete all as specified and directed by Engineer-in-charge. |
| 88 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed by Engineer-in-charge. |
| 89 | S & F For framed work as in doors or gates of angle, hand rails or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc. complete all as specified and directed by Engineer-in-charge. |
| 90 | M&L Preparation of new or previously untreated surfaces of iron of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a of red oxide primer complete all as specified and directed by Engineer-in-charge. |
| 91 | M&L for Preparing New Wood and Wood Based Surfaces of any description, over 100mm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Coat of Pink Primer, complete all as specified and directed by Engineer-in-charge. |
| 92 | Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc . credit for above items should be made as per conditions separately complete all as specified and directed by Engineer-in-charge. |
| 93 | M&L for point wiring for light/fan/Bell with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc for the following :- |
| 94 | One light point controlled by one switch |
| 95 | One fan/exhaust fan point controlled by one switch and regulator |
| 96 | Socket outlet, three pin 5 Amps on the same board |
| 97 | Socket outlet, three pin, 5 Amp, independent |
| 98 | All as per item No . 93 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multi pin 15/16 amps socket outlet flush type on independent board. |
| 99 | Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :- |
| 100 | One light point controlled by one switch |
| 101 | One fan/exhaust fan point controlled by one switch and regulator |
| 102 | Socket outlet, three pin 5 Amps on the same board |
| 103 | Socket outlet, three pin, 5 Amp, independent |
| 104 | All as per item No . 95 above but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board. |
| 105 | S & F in replacement switch piano, flush type, single pole one way 5 amps complete all as specified and directed by Engineer-in-charge. |
| 106 | S & F in replacement switch piano, flush type, single pole one way 15 amps complete all as specified and directed by Engineer-in-charge. |
| 107 | S & F in replacement bell push flush type single pole one way 5 amps complete all as specified and directed by Engineer-in-charge. |
| 108 | S & F in replacement socket outlet 2 in 1, 5 pin, 5 amps flush type complete all as specified and directed by Engineer-in-charge. |
| 109 | S & F in replacement socket outlet 5 in 1, 5 pin, 15 amps flush type complete all as specified and directed by Engineer-in-charge. |
| 110 | S & F in replacement switch socket combination 5 in 1, 5 and 15 Amp flush type complete all as specified and directed by Engineer-in-charge. |
| 111 | S & F in replacement ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed by Engineer-in-charge. |
| 112 | S & F in replacement lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed by Engineer-in-charge. |
| 113 | S & F in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and directed by Engineer-in-charge. |
| 114 | S & F in replacemnet Call bell ding dong AC, 230 Volts, single pole complete all as specified and directed by Engineer-in-charge. |
| 115 | S&F in replacement switch Modular, one way 6 amps, 1 module with suitable plate and cover complete all as specified and directed by Engineer-in-charge. |
| 116 | S&F in replacement switch modular one way 16 amps, 1 module with suitable plate and cover complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 117 | S&F in replacement socket modular 6A, 2/3 pin combined 2 module with suitable plate and covercomplete as per exisisting make and model complete all as specified and directed by Engineer-in-charge. |
| 118 | S&F in replacement socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 119 | S&F in replacement modular fan regulator step type 120W, 2 module with suitable plate and cover complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 120 | S&F in replacement modular bell push 6 Amps 1 module with suitable plate and cover complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 121 | S&F in replacement White cover plate with frame 1 module complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 122 | S&F in replacement White cover plate with frame 2 module complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 123 | S&F in replacement White cover plate with frame 3 module complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 124 | S&F in replacement White cover plate with frame 4 module complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 125 | S&F in replacement White cover plate with frame 6 module complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 126 | S&F in replacement White cover plate with frame 8 module complete as per existing make and model complete all as specified and directed by Engineer-in-charge. |
| 127 | S&F Decorative ultra slim with aluminum housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten(LED tube light fitting complete 20/22W) with integrated electronic driver and 02 No PVC square blocks incl taking down old unserviceable fitting complete all as specified and directed by Engineer-in-charge. |
| 128 | S&F Decorative ultra slim with aluminum housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten(LED tube light fitting complete 10W) with integrated electronic driver and 02 No PVC square blocks incl taking down old unserviceable fitting complete all as specified and directed by Engineer-in-charge. |
| 129 | S&F aesthetically designed with multiple body colour option high efficiency LED, opaque diffuser , inbuilt driver suitable for highlighting wall hanging WALL LIGHT/ MIRROR LIGHT 10 Watt incl taking down old unserviceable fitting complete all as specified and directed by Engineer-in-charge. |
| 130 | S&F new generation energy saving LED Bulk Head fitting 10 Watt made up of Poly carbonate housing with diffuser incl taking down old unserviceable fitting complete all as specified and directed by Engineer-in-charge. |
| 131 | S&F LED building security light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection including suitable size bracket incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 132 | S&F decorative wall light fitting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base incl LED lamp (cool/warm white) 9 watt incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 133 | S&F in replacement IP65 new generation, post-top 35 watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete all as specified and directed by Engineer-in-charge. |
| 134 | M&L for sub main wiring with two run of 10 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 25 mm wide & 10 sqmm copper conductor cable PVC FRLSH unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one. |
| 135 | All as per item No 126 above but size 6 Sqmm Four runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity complete all as specified and directed by Engineer-in-charge. |
| 136 | All as per item No 126 above but size 6 Sqmm two runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity complete all as specified and directed by Engineer-in-charge. |
| 137 | All as per item No 126 above but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity complete all as specified and directed by Engineer-in-charge. |
| 138 | S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 139 | S&F in replacement MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 140 | M & L in replacement MCB distribution board double door 415 volt, TPN 4-way, incl taking down old unserviceable complete all as specified and directed by Engineer-in-charge. |
| 141 | S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 142 | S&F in replacement MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 143 | S & F in replacement MCB SP 6 to 32 Amps, 230 V AC incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 144 | S & F in replacement MCB SPN 40 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 145 | S & F in replacement MCB SPN 63 Amps, 230 V, AC incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 146 | S & F in replacement MCB TPN 63 Amps,415 V, AC incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. |
| 147 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium multistranded conductor of size 10 sqmm , served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular complete all as specified and directed by Engineer-in-charge. |
| 148 | All as per item No 139 above but of size 6 sqmm complete all as specified and directed by Engineer-in-charge. |
| 149 | All as per item No 139 above but of size 4 sqmm complete all as specified and directed by Engineer-in-charge. |
| 150 | M&L in replacement of PVC rectangular boards closed recessed of size 100 x 100 x 50mm complete all as specified and directed by Engineer-in-charge. |
| 151 | All as per ite No 142 but of size 175 x 100 x 50mm complete all as specified and directed by Engineer-in-charge. |
| 152 | All as per ite No 142 but of size 200 x 150 x 50mm complete all as specified and directed by Engineer-in-charge. |
| 153 | All as per ite No 142 but of size 250 x 200 x 50mm complete all as specified and directed by Engineer-in-charge. |
| 154 | M&L in replacement of Hylam White 3 mm Electrical Switch Board Sheet, Finishing Type complete all as specified and directed by Engineer-in-charge. |
| 155 | M&L in replacement of LED lamp 9 watt complete all as specified and directed by Engineer-in-charge. |
| 156 | M&L in replacement of Inverter LED bulb works on AC supply in normal mode and DC supply in inverter mode with inbuilt battery back up upto 4 hours high efficiency high lumens output complete all as specified and directed by Engineer-in-charge. |
| 157 | S&F LED INVERTER batten 18/20 watt, works on AC supply in normal mode and DC supply in inverter mode , with imbuilt battery back up of upto 4 hours , high efficiency high lumens output and 02 No PVC square blocks incl taking down old unserviceable fitting complete all as specified and directed by Engineer-in-charge. |
| 158 | S&F in replacement surface panel round Slim 18 watt 6500 K complete complete all as specified and directed by Engineer-in-charge. |
| 159 | S & F in replacement MCCB 4 pole 415V 63 Amps 16 kA incl taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender