Tender For Special Repair To Bldg No P-98 Sprox Complex At Acc&S Under Ge(N) Ahilyanagar.
Tender Value
43.77 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
17 days left
EMD
87600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No P-98 Sprox Complex At Acc&S Under Ge(N) Ahilyanagar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor and removing all rubbish/dismantled material outside MD Land. all as directed. |
| 2 | Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick all as directed. |
| 3 | M&L for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base all as directed. |
| 4 | M&L for Glazed colour ceramic tiles 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match coloured as approved by GE as in dado / skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed. |
| 5 | M&L for Non skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,mm as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed. |
| 6 | M&L for 15-18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills, jambs, lintel etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and directed. |
| 7 | M&L for machine cut cudappah stone slab 20-22 mm thick over cement screed base, laid over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as directed. |
| 8 | Demolition of plain cement concrete solid block//stone/brick masonary built in cement mortar & removing all rubbish/dismantled material outside MD Land.all as directed. |
| 9 | M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 10 | M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type C-5 1:5:10 using 20 mm graded aggregates and setting in mortar 1:6 complete all as directed. |
| 11 | Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water all as directed |
| 12 | M&L for rendering, 10 mm thick on brick/concrete surfaces in cement mortar 1:6 surfaces finished even and fair finish all as specified and directed. |
| 13 | M&L for rendering, 15 mm thick on stone/brick/ concrete surfaces in cement mortar 1:4 surfaces finished even and fair without using extra cement all as specified and directed. |
| 14 | M&L for 1 mm wall care putty on walls complete all as specified and directed by Engg-in-charge. |
| 15 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge & removing all rubbish/dismantled material outside MD Land.all as directed. |
| 16 | S&F Pre-painted Galvalume aluminium zinc coating GI based corrugated/Manglore pattern sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets & fasteners etc.complete all as specified and directed by Engg-In-charge.Note:Type of Profile of sheet will be as decided by GE. |
| 17 | Supply and fix Pre-painted 0.50 mm thick plain, galvanised sheet in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with, 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc.complete all as specified and directed by Engg-In-charge. |
| 18 | S&F Steel work in tubular trusses Roof trusses (framed) of section Rectangular/square/circular, post,trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 2014 and IS 4923- 2017 grade St.-240 |
| 19 | Supply and fix in repairs vitreous china wash down water closet with all Jaquar accessories as specifed below and approved by GE etc complete all as specified and directed by Engineer-in-Charge. a) Washdown water closet :- ITS-WHT-15753NP180PPZ Bidspa Rimless Bowl with Cistern For Coupled WC with Electronic PP Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set b) Flushing System :- CS-WHT-2431FS Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame, Installation Kit and “S-Type” Drain Pipe Connection Set for Wall Hung WC (without Flush Control Plate)c)Flush Control Plate :- JCP-CHR-852415 Control Plate Alive d) Health Faucet :-ALD-CHR-577 Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer)e) 2-Way bib cock :- COP-CHR-041PM 2-way Bib Cock with Wall Flange. |
| 20 | Supply and fix in repairs ceremic table top wash hand basin vitreous China, with all Jaquar accessories as specifed below and approved by GE etc complete all as specified and directed by Engineer-in-Charge..a) Table top WHB :-JDS-WHM-25907N Thin Rim Table Top Basin, Shape: Rectangular, Size: 530x420x140 mmb) Waste Coupling :- ALD-CHR-729L130 Click Clack Waste 32mm Size Half Thread with130mm Height c) Bottle Trap :- ALD-CHR-769L250X190 Bottle Trap 32mm Size with 250mm & 190mmLong Wall Connection Pipes & Wall Flange d) Hot & Cold Pillar tap :- COP-CHR-001BPM Single Lever Basin Mixer without Popup Wastewith 450mm Long Braided Hoses e) Connection Pipe :-2 Nos ALD-CHR-805B 450mm Long Braided Hoses with Two 15mmNuts & Rubber Washers without Nipple f) Angle Cock :-2 Nos COP-CHR-057PM Angular Stop Cock with Wall Flange. |
| 21 | Supply and fix in repairs Hot and Cold shower system with over head shower and telephonic shower system as specified, with all Jaquar accessories as specified below and approved by GE etc complete all as specified and directed by Engineer-in-Charge.a) Wall Mixer :- CQT-CHR-23281UPR Wall Mixer 3-in-1 System with Provision for bothHand Shower & Overhead Shower Complete with 115mm Long Bend Pipe on Upper Side, Connecting Legs & Flanges (without Hand & Overhead Shower) b) Over head Shower :-OHS-1639 Maze Overhead Shower 300x300mm Square Shape Single Flow (Body & Face Plate Stainless Steel) with Rubit Cleaning System Registered design no.276017c) Telephonic Hand shower :- HSH-9537N Victorian Hand Shower Head Round (Bell Type)Single Flow (Brass) with Rubit Cleaning System e) Flexible Pipe :- SHA-549D8 Flexible Tube 8mm dia. & 1.5M Long with Nuts Rs. 950f) Wall bracket :-SHA-555 Premium Wall Bracket for Hand Shower, 35mm dia. & 100mm Long Round Shapeg) Angle Cock :-2 Nos COP-CHR-057PM Angular Stop Cock with Wall Flange. |
| 22 | Supply and fix in repair bib tap, 15 mm dia, Make Jaquar COP-CHR-107PM Long Body Bib Cock with Wall Flange CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule all as directed. |
| 23 | Supply and fix in repairs stop valve Make Jaquar COP-CHR-057PM Angular Stop Cock with Wall Flange Rs. 950cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore |
| 24 | Supply and fix in repairs Make Jaquar ACN-CHR-1111SM Single Towel Rail 600mm Long, Stainless Steel tubular towel rail, brass chromium plated , 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge |
| 25 | Supply and fix Make Jaquar ACN-CHR-1161N Double Coat Hook with all accessories complete all as specified and as directed by Engineer in Charge. |
| 26 | Supply and fix Make Jaquar ACN-CHR-1173 Corner Glass Shelf (with Bracket) with all accessories complete all as specified and as directed by Engineer in Charge. |
| 27 | Supply and fix Make Jaquar ACN-CHR-1181FHS Towel Rack 600mm Long without Lower Hangers but with 3 hooks, Stainless Steel with all accessories complete all as specified and as directed by Engineer in Charge. |
| 28 | S&F in repair Make Jaquar ACN-CHR-1153S Toilet Roll Holder with Stainless Steel Flap Chromium Plated toilet paper holder fixed with (CP) brass screws of approved quality compelte all as speficied and as directed by Engineer in Charge. |
| 29 | S&F in repairs Make Jaquar ACN-CHR-1121BN Towel Ring Round with Round Flange towel ring recangular chromium plated fixed with (CP) brass screws of approved qualityas specified. |
| 30 | S&F in repairs Soap Dish Make Jaquar ACN-CHR-1131N Soap Dish Holder type including necessary fitting material screws etc complete all as specified. |
| 31 | S&F 12 mm thick Toughned glass as in hinged doors, partitions, automatic doors, Bathroom partition and similar work including all necessary fittings fixed to position, cutting to shape, drilling holes required complete all as specified and directed by Engg-in-charge |
| 32 | M&L for preparation of new unplastered or plastered surfaces and applying two coats of oil bound distemper including chalk whitening on wall including smooth roller finish complete all as directed. |
| 33 | M & L for preparation of newly plastered surface of wall and apply wheather proof 100 % acrylic exterior emulsion apex ultima paint of any tint over a coat of suitable primer any height including scaffolding etc complete all as directed. |
| 34 | M&L for complete removal of existing treatment, washing, rubbing down and stopping old distempered and apply a coat of wall care putty over the surface of walls and get the wall in plumb line and applying two coats of oil bound distempering on walls all as directed. |
| 35 | .-ditto- all as per ser item No 34 above (here-in-before) but on ceiling. |
| 36 | M & L for preparation of old plastered treated surface of walls by brooming down and apply one coats of wheather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces complete all as directed. |
| 37 | M&L for preparation of old surfaces of wood of any description exc 10cm width/girth incl cleaning applying one coat of synthetic enamel all as specified directed by Engineer-in-charge. |
| 38 | M&L for preparation of old steel and iron surfaces, of any description, over 10 cm width or girth not other wise described and applying one coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 39 | Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) all as directed. |
| 40 | Taking down chowkats or frames n exc 1.5 Sq m with shutters (without taking off shutters from the frames) all as directed. |
| 41 | Taking down shutters of any description exc 1 sqm and n exc 2 sqm each all as specified directed by Engineer-in-charge. |
| 42 | Taking down shutters of any description n exc 1 sqm each all as specified directed by Engineer-in-charge. |
| 43 | S & F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified, |
| 44 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per directed by Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 45 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per directed by Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 46 | Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 47 | Supply and fix 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed. |
| 48 | Supply and fix stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples all as directed. |
| 49 | Supply and fix for 3 mm thick sheet frosted/pin headed in squares n exc 0.50 sqm in each pane |
| 50 | Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm |
| 51 | Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long. |
| 52 | Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long. |
| 53 | Supply and fix aluminium anodised handles of extruded section 150mm long. |
| 54 | S&F in repair 300mm mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed. |
| 55 | S&F in repair Cylindrical Latch Door Lock Tubular (Dumbell lock) stainless steel finish fixed in door complete all as specified and directed by Engg-in-charge.Make: Godrej, Europhia or equivalent. |
| 56 | S&F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 57 | M&L for two coats of synthetic enamel paint over a coat of pink primer for new wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces and smooth finish with roller all as directed. |
| 58 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer for new steel surfaces of any description exc 10 cm width or girth including preparation of surfaces all as directed. |
| 59 | Supply and fix mild Steel 20 mm dia decorative powder coated curtain rods with fixing brackets fixed in repairs complete all as specified and directed. |
| 60 | Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc all as directed. |
| 61 | M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge Note : Work has to be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE. |
| 62 | Supply and fix in repair health faucet with 15 mm dia 1.25 m long flexible tube wall mounted / hooked including making connection and fixed in position complete all as specified and directed by Engg-in-charge |
| 63 | Supply and fix 15 mm dia pillar tap basin mixer cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. |
| 64 | Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty all as directed. |
| 65 | M&L for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane all as directed. |
| 66 | Supply and fix in repair stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples all as directed. |
| 67 | Supply and fix in repairs rotational moulded polyethylene water storage tanks Tripal layer (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipr and connecting complete all as specified and directed. |
| 68 | S&F in repairs PVC connections 15 mm size with Brass/Stainless steel Nuts of length 600mm |
| 69 | S&F in repair for stainless steel grating without waste holes 100 mm dia |
| 70 | S&F in repair for stainless steel grating with waste holes 100 mm dia |
| 71 | S&F for PVC (SWR) floor trap, plain with grating including jointing with solevent cement 75 mm bore |
| 72 | S&F in repair PVC (SWR) 110mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed. |
| 73 | .-Ditto- all as per ser item no 72 above but as in trenches or floor |
| 74 | S&F in repair PVC (SWR) 75mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed. |
| 75 | .-Ditto- all as per ser item no 74 above but as in trenches or floor |
| 76 | S&F PVC (SWR) 110 mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed |
| 77 | S&F PVC (SWR) 75mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed |
| 78 | S&F PVC (SWR) junction single, (Single T) equal or un equal 110mm bore |
| 79 | S&F PVC (SWR) junction single, (Single T) equal or un equal 75mm bore |
| 80 | S&F PVC (SWR) junction single, (double Y) equal or un equal 110mm bore |
| 81 | S&F PVC (SWR) vent cowl110mm bore |
| 82 | S&F for low density polyethelene pipes 32 mm bore (LDPE) of pressure rating 6 Kg/cm² laid in trenches/fixed to wall |
| 83 | Taking up or down steel tubing and connections,15 mm bore |
| 84 | .-Ditto- all as per ser item no 83 above but 20mm bore |
| 85 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 86 | S&L of CPVC pipes SDR 11 including fittings in trenches, 16mm outer dia fixed to walls /ceiling or laid in trenches incl all necessary fittings. |
| 87 | .-Ditto- all as per ser item no 86 above but 20mm outer dia etc Please Enable Macros to View BoQ information |
| 88 | .-Ditto- all as per ser item no 86 above but 20mm outer dia etc Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender