Tender For Special Repair Of Stn Swimming Pool At Faridkot Mil Stn
Tender Value
56.66 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
19 days left
EMD
1.09 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Faridkot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Stn Swimming Pool At Faridkot Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed. |
| 2 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames). |
| 3 | M&L anodised powder coated Aluminium frame for doors, window, slidingwindow,ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on Aluminium minium thickness of powder coating 50 micron as per the specification the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners . Aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required all complete as per the direction of Engineer-in-charge |
| 4 | M&L Anodised powder coated aluminium door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door,03 Nos hinges in each door, anodised aluminum snap beading screws etc. complete all as specified |
| 5 | S&F Aluminium anodised handles, cast type anodised 150 mm long complete all as specified and directed. |
| 6 | S&F 100 mm long, Stainless Steel hinges with stainless steel steel screws complete. |
| 7 | S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed. |
| 8 | Supply only sheet glass ordinary quality 5 mm thick and glazing with rubber beading fixed to steel, metal ,aluminium or wooden door/ window frames complete all as specified. |
| 9 | S&F in repair aluminium (Die cast) body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80kg and fixed complete all as specified and directed by Engineer-in-Charge. |
| 10 | S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed |
| 11 | S& F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 12 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. |
| 13 | Material & Labour for providing and fixing stainless steel (Grade 304) for railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premises complete all as specified. |
| 15 | M&L 15mm thick antiskid vitrified tiles of approved size 400mmx400mm or 600x600mm , of approved colour, shade and texture,having minimum R11 slip resistance and suitable barefoot wet area performance, water absorption not exceeding 0.5% , high abrasion resistance, high breaking strength and resistance to weathering, UV exposure, suitable for outdoor swimming pool deck areas. Tiles shall be laid with and incl approved tile adhesive suitable for exterior wet areas over and including 25 mm thick PCC bed of 1:2:4 and keeping 3-4mm wide uniform joints which shall be filled with and incl approved epoxy grout complete all as specified as directed by Engr-in- Charge |
| 16 | S&F vitrified tiles 8 to 10 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors. Tiles shall be laid with and incl approved tile adhesive over and including 25 mm thick PCC bed of 1:2:4 and keeping 3-4mm wide uniform joints which shall be filled with and incl approved epoxy grout complete all as specified as directed by Engr-in- Charge complete all as specified as directed by Engr-in- Charge |
| 17 | S&F Anti skid vitrified tiles 8 to 10 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors. Tiles shall be laid with and incl approved tile adhesive over and including 25 mm thick PCC bed of 1:2:4 and keeping 3-4mm wide uniform joints which shall be filled with and incl approved epoxy grout complete all as specified as directed by Engr-in- Charge complete all as specified as directed by Engr-in- Charge |
| 18 | S&F Glazed ceramic coloured tiles with highlighter in vertical surface 600x300x7mm thick set and jointed with suitable tile adhisive and pointed with grout to match the coloured tiles over 15mm thick layer of ready mix plaster mortar for laying finishes, complete all as specified as directed by Engr-in- Charge. |
| 19 | Taking up or down GI tubing 15mm bore pipe. |
| 20 | Taking up or down GI tubing 20mm bore pipe |
| 21 | Supplying and laying of 20mm nominal size CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other Brass fittings required except given in item number 55, 56,57and 58 on walls /ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified complete all as specified and directed by Engr-in-Charge.Note : Pipes to be fixed on wall with and incl clamps made of galvanised carbon steel and having noise absorbing silicon rubber sleeve. Clamps to be fixed to wall with anchor fastner with nut and washer and full threaded bar of size M 10. Distace of two clamps should not be more than 1.00m complete all as specified and directed. |
| 22 | Supplying and laying of 25mm nominal size CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and incl all other Brass fittings required on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified complete all as specified and directed by Engr-in-Charge.Note : Pipes to be fixed on wall with and incl clamps made of galvanised carbon steel and having noise absorbing silicon rubber sleeve. Clamps to be fixed to wall with anchor fastner with nut and washer and full threaded bar of size M 10. Distace of two clamps should not be more than 1.00m complete all as specified and directed. |
| 23 | S&F of 20 mm CPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified. |
| 24 | S&F of 20 mm CPVC Brass Elbow fittings complete all as specified |
| 25 | S&F of 20 mm CPVC Brass T fittings complete all as specified |
| 26 | S&F of 20 mm CPVC Brass Union fittings complete all as specified |
| 27 | S&F in repairs 20mm gun metal globe or gate valve with iron wheet head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 28 | S&F in repair 15 mm bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 29 | S&F Brass single lever CP Basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin (incl PVC connection for Hot & cold Water) complete all as specified and directed. |
| 30 | S&F Brass CP Wall mixer 15mm bore for mixing hot & cold water telephonic type with L bend for shower connection screwed down for iron pipe complete all as specified and directed. |
| 31 | S & F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed |
| 32 | S & F in repair 15 mm bore chromium plated stop valve of cast copper alloy with long shank and cup (concealed type) ends for iron pipe or for unions and fixed all as specified and directed |
| 33 | S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified |
| 34 | S&F in repair vitreous china counter wash basins, size 470x470mm to be fixed over and incl granite & RCC slab minimum 650mm wide and 1200mm long including including 32mm waste fittings, CP bottle trap, waste pipe complete all as specified and directed. |
| 35 | Supply and fixing vitreous china premium/1st quality wall hung water closet incl soft close seat cover with P trap white/ivory/off white including reduction drain (for outgoing pipe) and flushing pipe, anti-siphonage pipe, etc. and making holes in wall cover as recommended by manufacturer for particular model, closed pattern with flat bottom etc. and including S & F all necessary accessories set like rag bolts/gel gasket/hinges, SS jet spray with 01 metre long PVC pipe with CP connector etc. as recommended by manufacturer for fixing, packing and taking down existing WC of any description/size complete in all respect as specified. |
| 36 | Supply and fixing concealed flushing cistern of PVC 8 litre capacity with dual flushing system, valve less syphonic action type, with inlet/outlet, ball valve, float, all internal/external components connection to pipe etc. and including S & F of all necessary accessories/installation kit, butterns and ‘S’ type drain pipe connection set for wall hung WC. |
| 37 | S&F in repair vitreous china urinal size 265x335x695mm cat No S4020116 of cera or equivalent,white, incl all fittings, bottle trap, CP spreader, waste coupling and waste pipe complete all as specified and directed |
| 38 | S&F in repair brass chromium plated shower rose 200 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed |
| 39 | S&F 1500mm x 750mm x 6mm bevelled edge mirror of selected quality glass and fixed to wall with 25mm long SS spacer and cap complete all as specified. |
| 40 | S&F 900mm x 750mm x 6mm bevelled edge mirror of selected quality glass and fixed to wall with 25mm long SS spacer and cap complete all as specified. |
| 41 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges. |
| 42 | S & F Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 43 | S&F SS soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 44 | S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed. |
| 45 | Dismantling and disconnecting existing PVC/CI soil waste/vent pipe 100/75 mm bore fixed to wall,laid in trenches incl all fittings & accessories |
| 46 | S & F 110 mm bore of pipe PVC (SWR) pipes grade 'B' single socket in any length with rubber ring joint laying in floor/wall with and including suitable size GI clamps/brackets (interval of 1m and keeping pipe 100mm away from wall ) complete all as specified and directed.Note : PVC pipe laid under floor shall be covered with PCC 1:2:4. |
| 47 | S & F 75 mm bore of pipe PVC (SWR) pipes grade 'B' single socket in any length with rubber ring joint laying in floor/wall with and including suitable size GI clamps/brackets (interval of 1m and keeping pipe 100mm away from wall ) complete all as specified and directed.Note : PVC pipe laid under floor shall be covered with PCC 1:2:4. |
| 48 | S & F 110 mm bore of pipe PVC (SWR) bends heavy grade of any radius / shoe fixed to PVC pipes as directed |
| 49 | S & F 75 mm bore of pipe PVC (SWR) bends heavy grade of any radius / shoe fixed to PVC pipes as directed |
| 50 | M&L for 75mm dia of long body PVC Floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified. |
| 51 | M&L PVC (SWR) junction single,(Single T), 75 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 52 | M&L PVC (SWR) junction single,(Single T), 100 mm bore, (equal or unqual), ordinary or inverted (spigot or socket type) or with oval acess door as in repairs complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F in repairs PVC (SWR) vent cowl 100 mm complete all as specified and directed |
| 54 | S&F Salt-glazed stoneware gully traps 150x 150 mm , square or round mouthed, type 'P |
| 55 | Taking down Cement plaster/grit finish/rough cast including raking out joints hacking for key scrubbing down with water etccomplete all as specifiedand directed. |
| 56 | M&L for Rendering 15 mm thick with ready mix plaster mortar of approved make on any faces of brick wall or concrete surfaces finished even and smooth complete all as specified and directed by Engr-in-Charge. |
| 57 | M&L for Rendering 5 mm thick in ready mix plaster mortar of approved make on ceiling surface finished even and smooth complete all as specified and directed by Engr-in-Charge. |
| 58 | M & L for Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified. |
| 59 | M & L for Applying acrylic thick wall care putty on internal and external surfaces of walls/ceilings (thickness vary from 1.0 to 2.0mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. |
| 60 | M & L for Applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/coat by using roller/brush to prepared wall/ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. |
| 61 | M & L for Finishing walls with Acrylic Smooth exterior paint of required shade over prepared surface (Two coat applied @ 1.67 ltr/10 sqm/coat over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) by using following brands of emulsion and primer complete all as specified and directed. |
| 62 | M&L for preparing any surfaces of ceilings including cornices and applying two coats of oil bound distemper complete all as specified and as directed by Engineer-in-Charge. |
| 63 | Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge |
| 64 | M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in - Charge. |
| 65 | All as per Srl item No 64 above but except bricks |
| 66 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil |
| 67 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 68 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 69 | M&L Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in Fdn, filling and mass concrete complete as specified and directed. |
| 70 | Demolition and breaking up drain pipes 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar |
| 71 | Supply and laying DWCPE (SN8) 180 (OD)/163 (ID) mm diameter drain pipes as per IS-16098 (Part-II), laid in trenches on moorum bed to required slope, including all accessories/fittings, jointing and tested complete all as specified and as directed by Engineer-in-Charge |
| 72 | S&F in repair SFRC (Steel fibre Reinforcement concrete cover & frame ) HD-20mm, conforming to IS-12592, graded rectangular clear opening 560X560mm and fixed over manhole and make good of manhole complete all as specified and directed |
| 73 | S & F in Repair Precast Cement Concrete ( type B0 1:2:4 using 12.5mm graded stone aggregate) as in louvres and jallies , 25mm thick set in CM 1:4 All as specified and directed by Engr in Charge |
| 74 | M& L 247mm x 122mm x 8-10mm swimming pool coloured tiles in floor surface of pool. Tiles confirming to IS 15622: 2006 and IS 15306:2002 and to be laid with polymer modified tile adhesive for swimming pool tiles ( IS 15477) over and incl prepared bed with polymer modified rendering mortar of approved make as per tiles manufacturers instructions and filling joints of tiles with epoxy morter all as directed and approved. |
| 75 | M& L 247mm x 122mm x 8-10mm swimming pool coloured tiles in wall surface of pool. Tiles confirming to IS 15622: 2006 and IS 15306:2002 and to be laid with polymer modified tile adhesive for swimming pool tiles ( IS 15477) over and incl prepared bed with polymer modified rendering mortar of approved make as per tiles manufacturers instructions and filling joints of tiles with epoxy morter all as directed and approved. Please Enable Macros to View BoQ information |
| 76 | M& L 247mm x 122mm x 8-10mm swimming pool coloured tiles in wall surface of pool. Tiles confirming to IS 15622: 2006 and IS 15306:2002 and to be laid with polymer modified tile adhesive for swimming pool tiles ( IS 15477) over and incl prepared bed with polymer modified rendering mortar of approved make as per tiles manufacturers instructions and filling joints of tiles with epoxy morter all as directed and approved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender