Tender For Provn Of Motor Transport Shed With Hard Standing And Industrial Ro Plant At Z Gali Under Ge 874 Ews.
Tender Value
43.49 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
9 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Motor Transport Shed With Hard Standing And Industrial Ro Plant At Z Gali Under Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n. exc 30 cm deep and average 15 cm deep and getting out in any type of soil complete all as specified and directed. |
| 2 | M&L for excavation in post holes, soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 3 | M&L for cement concrete 1:2:4 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 4 | M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 5 | M&L for 100mm thick Cement concrete (1:2:4), type B-2, using 40mm graded stone aggregate complete all as specified and directed. |
| 6 | M&L 150mm thick Cement concrete,1:4:8 type D-2 using 40mm graded aggregate as in sub base of floor complete all as specified and directed. |
| 7 | M&L for 75mm thick Cement concrete (1:3:6), type C-2, using 40mm graded stone aggregate as in plinth protection complete all as specified and directed. |
| 8 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 as in wall complete all as specified and directed. |
| 9 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) complete all as specified and directed. |
| 10 | M&L for preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed. |
| 11 | M&L for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 12 | M&L for Pre- painted galvalume aluminium zinc coating GI based plain sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 13 | M&L for mild steel rolled sections/Pipes as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, columns, fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 14 | M&L for preparing new surfaces of steel of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed |
| 15 | M&L providing, cement concrete 1:2:4 type B1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided in , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed. |
| 16 | M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed. |
| 17 | Supply, installation, testing and commissioning industrial RO + UV + PHE + softener water purifier system of capacity 250 LPH consisting of three numbers fibre reinforced polymer vessel with treatment media like FBM, AFM, MGS, ACM, CPM, softener media etc along with back wash system with multiport valves, strainer, feed water pump, high pressure pump, RO element, ultra violet system with electric control panel and internal and internal CPVC pipe fitting, gate valves, non return valves, inlet and outlet connections fitted on wall furnished and painted MS frame complete in all aspect with anti scaling dosing system, PH enhancer dosing system and containers complete all as specified and directed. |
| 18 | M&L for stainless steel water storage tank with double wall insulated and steel of grade SS316 & SS304 of capacity 1000 Ltrs and diameter 1600 mm complete all as specified and directed. |
| 19 | M & L for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I for water storage PVC tank triple layer of capacity 2000 ltrs all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender