Tender For Provn Of Membrance Sheet And Certain Minor Work At Air Force Station Nathatop Under Ge (Af) Udh Ur
Tender Value
19.35 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
10 days left
EMD
38700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Membrance Sheet And Certain Minor Work At Air Force Station Nathatop Under Ge (Af) Udh Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Oct-2026 | CERTAIN CHANGES IN TENDER DOCUMENTS | BOQ | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting and translucent corrugated sheeting, any gauge, thickness, in roof covering of height upto 20.0 mtr from avg ground level (including scaffolding if required) for all type building complete all as specified and as dirceted. |
| 2 | M & L in repairs APP based polymeric water proofing membrane ,five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified and directed.Note : The rate quoted shall be deemed to include for dismantling and refixing in position of lightening protection after carrying out the treatment at height upto 20.0 mtr from avg ground level (including scaffolding if required) for all type building complete all as specified and as directed. |
| 3 | M&L for applying evenly a tack coat for roof treatment of industrial bitumen 85/25 at the rate of 0.40 Kg per Sqm including cleaning surfaces, complete at height upto 20.0 mtr from avg ground level (including scaffolding if required) for all type building complete all as specified and as directed. |
| 4 | S&F wind ties for roof of height upto 20.00 mtr from avg ground level made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) complete all as specified and as directed . |
| 5 | M&L applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces of any description not exc 10 cm width or girth including preparation of surfaces upto height 20.0 mtr from avg ground level (including scaffolding if required) for all type building, complete all as specified and directed. |
| 6 | Excavating in post holes (or similar holes) in soft soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed . |
| 7 | Material and labour for providing cement concrete in foundations 1:4:8 type D2 ( using 40mm graded stone aggregate) filling and mass concrete complete all as specified & directed |
| 8 | Supply and fix rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed . |
| 9 | Suuply and fix rolled mild steel roof truss ( framed ) , trussed , purlins , crane gantries , rails and fastenings and heavy bracket framing ( beam , tee , angle , channel or flat sections ) including distance pieces , cleats conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed . |
| 10 | Supply and fix plates ( plain or chequered ) as per IS-3502 ( Base IS-10748 Gr-II ) square or rectangular cut or notched ( ordinary and counter shunk ) forming holes , without any attachment complete all as specified and as directed . |
| 11 | Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed |
| 12 | Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall upto 20 Mtr Height from any ground level, fixed with self tapping screws complete all as specified & directed |
| 13 | Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth including preperation complete all as specified and as directed . |
| 14 | Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed . |
| 15 | M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base |
| 16 | M&L 15mm thick screed bed or bedding layer in cement mortar 1:6 as in floors complete all as specified and directed. |
| 17 | M&L chequred cement concrete tiles of size 30cm X 30 cm X 25mm thick,with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 10 daysNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender