Tender For Provn Of Certain Minor Works/ Revenue Works At Air Force Station Udh Ur Under Ge (Af) Udh Ur
Tender Value
28.62 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
5 days left
EMD
57300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain Minor Works/ Revenue Works At Air Force Station Udh Ur Under Ge (Af) Udh Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Oct-2026 | CERTAIN CHANGES IN TENDER DOCUMENTS | BOQ | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m depth for foundation etc, manholes n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out any type of soil complete all as directed . |
| 2 | Material and Labour PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling complete all as specified and as directed . |
| 3 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick , including watering ,ramming complete all as specified and as directed . |
| 4 | Removing of soil to distance exc 50 mtr and n.exc 250 mtr depositing at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed . |
| 5 | Material and Labour RCC 1:1.5:3 type B-1 (using 20mm graded agg) as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and as directed . |
| 6 | Material and Labour RCC 1:1.5:3 type B-1 (using 20mm graded agg) as in column ,pillars,piers posts struts complete all as specified and as directed . |
| 7 | Material and Labour RCC 1:1.5:3 type B-1 (using 20mm graded agg) as in beams ,cantilevers ,bressummers ,lintels over 1.5 mtr span complete all as specified and as directed . |
| 8 | M&L for RCC 1:1.5:3 type B-1 (using 20mm graded agg) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like,complete all as specified. |
| 9 | Use and waste of form work to the side of Footing of column and plinth beam complete all as specified and as directed . |
| 10 | Use and waste of form work to the side of lintel beams,roof beams and complete all as specified and as directed . |
| 11 | Use and waste of form work to faces of sides of RCC column incl finishing the surface even snd fair complete all as specified and as directed . |
| 12 | Use and waste of formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete as per specified |
| 13 | Material and Labour TMT bar 10mm dia and over cut to length, bent to shape as required and binding with MS wire n.less than 0.9 mm dia annealed complete all as specified and as directed . |
| 14 | M&L for TMT bars 5 to 10 mm dia as in stirrups complete all as specified and as directed . |
| 15 | M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 16 | M&L for Rendering 15mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surfaces, finished even and smooth w/o using extra cement, complete all as specified and as directed. |
| 17 | M&L for Rendering 5 mm thick plaster in CM 1:3 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for Rendering 5mm thick on brick masonary surfaces in CM-1:4 with WPC over 10mm thick rendering with CM-1:6 including finish the surface even & fair on wall surface complete all as specified and directed. |
| 19 | M&L for Preparing of newly plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 20 | M&L for Preparing of newly plastered surfaces of wall and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 21 | M&L for Preparing of newly plastered or unplastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed. |
| 22 | M&L 100 mm thick cement concrete (1:4:8) type D2 as sub base to floor as specified. |
| 23 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified. |
| 24 | M&L for Glazed ceramic coloured tiles 300mm x 450mm x 7-8mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge. |
| 25 | M&L for Non skid coloured ceramic tiles 7 to 8 mm thick, area of each tiles exc. 0.06 SQM and but n.exc. 0.11 SQM in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.complete all as specified and directed by Engr-in-Charge. |
| 26 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing complete all as specified. |
| 27 | S&F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face and 2mm thick plain coloure PVC sheet on back face complete all as specification and drawing. |
| 28 | S&F aluminum handles cast type, anodised, 150 mm size complete all as specified . |
| 29 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified . |
| 30 | S&F extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,100 mm long complete all as specified. |
| 31 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete |
| 32 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as directed. |
| 33 | M&L for PCC 1:3:6 type C-2 as in plinth protection including finish even and smooth surface complete all as directed. |
| 34 | S&F for steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified. |
| 35 | S&F for steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified. |
| 36 | Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as directed. |
| 37 | S&F for 20mm dia, Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified . |
| 38 | S/F in repair Vitreous china wash down water closet Pan (pedestal Pattern) white (excluding fixing bolt ,flushing cistern and flush pipe size 580 x 440 mm white with integral foot rest connecting flushing cistern and flush pipe complete all as specified and as directed. |
| 39 | S & F seat and cover for pedestal pan white/black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge device complete all as specified and as directed. |
| 40 | S&F PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. Make: - Cera, Jaquar, Hindustan |
| 41 | S&F for PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified. |
| 42 | S&F for Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified. |
| 43 | S&F, 15 mm dia bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified. |
| 44 | S & F in repair Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted / erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 complete all as specified. |
| 45 | S&F in repair Brass chromium plated WHB center hole single lever mixer for mixing hot & cold Water screwed down for iron pipe 15mm bore complete all as specified and as directed. Make : Jaquar or equivalent in quality and model. |
| 46 | S&F Vitreous China Urinal, bowl type, size of 465 x 355 x 265 mm white (excluding flushing cistern, flush pipe and waste pipe), bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified. |
| 47 | S&F PVC waste pipe of polyethylene of low or high density or PVC. 32 mm dia, complete all as directed. |
| 48 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) |
| 49 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick building board of commercial plywood and fixed to wooden plugs with chromium plated screws complete all as specified. |
| 50 | S&F for brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified. |
| 51 | S&F CP Brass Toilet paper holder fixed to walls screws complete all as directed. |
| 52 | S&F glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed with and including Chromium plated brass screws and wooden/plastic cleats etc complete all as directed. |
| 53 | S&F CP Health faucet with 1 Mtr tube and hook complete all as directed. Make : Cat No : ALD-579 of Jaquar or equivalent. |
| 54 | S&F Grating doom 100mm dia of PTMT complete all as directed. |
| 55 | S&F Grating doom 100mm dia of PTMT with waste hole complete all as directed. |
| 56 | S&F 110/110mm PVC (SWR) 'P' trap completed all as specified. |
| 57 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors completed all as specified. |
| 58 | S&F 110 mm bore PVC (SWR) junction double, (double T), equal or unequal completed all as specified. |
| 59 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors completed all as specified. |
| 60 | S&F 110 mm bore PVC (SWR) bend (any radius) completed all as specified. |
| 61 | S&F 75 mm bore PVC (SWR) bend (any radius) if provided with access doorcompleted all as specified. |
| 62 | S&F 110 mm bore PVC (SWR) vent cowl completed all as specified. |
| 63 | M&L 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) all as specified. |
| 64 | S&F pegs set of six hooks, solid body,300mm long made of aluminium body complete all as directed. |
| 65 | S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified |
| 66 | M&L for complete waterproofing treatment to roof surface/parapet/ terrace using Asian Paints smartcare system (Hydroloc xtreme/ Terrace shield/ Damp Proof Ultra or approved equivalent)/ Dr. Fixit (roofseal classic/roofseal select) consisting of the following operations: (a) Preparation of roof surface including removal of existing bitumen coating, APP membrane completely, laitance, dust, grease, algae/fungus by using intense wire brushing or high speed water jet for thorough cleaning. (b) Filling of visible cracks/opening with smartcare crack seal. Bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortar. (c) Applying primer coat (Smartcare epoxy primer/damp proof primer) @ 0.92 Sqm/ltr using roller. (d) Applying two or more coats of smartcare waterproofing system (Damp proof ultra/hydroloc xtreme/terrace shield) with reinforcement mesh at roof surfces/corners/junctions, achieving minimum total dry film thickness 1.5mm. (e) Providing protective top coat of solar reflective smartcare sunshield, complete all as specified and as directed by Engr-in-Charege. Note:- Rate include for \\"Taking down existing water tank from existing staging carefully and refixing the water tank in original position after waterproofing treatment including necessary fixing arrangement as required\\". |
| 67 | S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories, complete all as specified. |
| 68 | S&F in repair two way angle cock with 15mm wall flange complete Make : Jaquar or equivalent in quality and model. |
| 69 | M&L for PCC 1:4:8 type D-2 100 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and as directed. |
| 70 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed |
| 71 | S&F Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as directed. Make : Cat No : VGP-81011B of Jaquar or equivalent in quality and price. |
| 72 | Cutting into existing manholes for connecting new drains pipe 110mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as directed. |
| 73 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 74 | S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall / Ridges, fixed with self tapping screws as specified. |
| 75 | Supply and fix rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W ( Gde -E-250 ) quality-A complete all as specified and as directed . |
| 76 | S&F rolled mild steel as Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410 Gde E-250 quality A complete all as specified and directed. |
| 77 | S&F rolled mild steel as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410 Gde E-250 quality A complete all as specified and directed. |
| 78 | S&F Mild steel screw bolts 16 to 20 mm dia of neck (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm and n exc 45cm long complete all as specified and as directed. |
| 79 | Material and Labour for small articles such as clamp , hold fast , wall ties /wind ties , support of valley gutters , support or stays fo rain water , ventilating pipes , including bolts if required etc made of MS flat iron conforming to Fe-290 W ( Gde E-165 ) all as specified and as directed . |
| 80 | Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface n.exc 10 cm width or girth complete all as specified and as directed . |
| 81 | M&L for preparation of newly plastered surface and applying two coat of Oil Bound distemper over a coat of primer on walls complete all as specified and as directed. |
| 82 | M&L coloured vitrified tiles (light shade) 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry over and including 15mm thick screed in CM-1:6 complete all as directed. |
| 83 | M&L coloured vitrified tiles (light shade) 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 Sqm in vertical surface or skirting etc set and jointed in neat cement slurry over and including 10mm thick rendering in CM-1:4 complete all as directed. |
| 84 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 85 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 86 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock complete all as directed. |
| 87 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.complete all as specified and as directed. |
| 88 | M&L for 4mm thick Non asbestos fibre cement building boards, ISI marked, fixed to snap grid frame work 605x605 mm as in ceiling, flat or slopy as per manufacture's instructions complete all as specified and directed. |
| 89 | Excavation in post holes (or similar holes) Each not exceeding 0.5 Cu.M getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25cm watering and removing surplus soil to a distance not exceeding 50M and making good in any type of soil complete all as specified and as directed |
| 90 | S&F mild steel angle iron as in fencing posts and struts including cutting tops to shape as directed drilling holes notching of wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or revieting, welding at corners etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 91 | S&F Mild steel screw bolts 11 to 15 mm dia of neck (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm and n.exc 15 cm long. complete all as specified and as directed. |
| 92 | M&L for preparation of surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as directed. |
| 93 | M&L for Framed work as in doors or gates, cage for covering garbage bin made of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-410 Gde E-250 quality A complete all as directed. |
| 94 | Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall not exc half brick complete all as directed. |
| 95 | M&L for PCC 1:3:6 Type C-2 (using 40mm graded Agg) as in foundations, filling and mass concrete, complete all as specified and as directed. |
| 96 | M&L for Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete, etc conforming to Fe-410 Gde E-250 quality A complete all as directed. |
| 97 | M&L point wiring using approved colour coding as per IS for one light/bell/buzzer point controlled by one switch or one fan point controlled by one switch & fan regulator with PVC insulated, unsheathed FRLS multi stranded copper conductor 1.5 sqmm (nominal area) 1100 volt grade cable for phase & neutral drawn through PVC conduits concealed/surface with new modular sunken boxes and suitable size of inner, outer modular cover frame, cover for mounting switch, socket and regulator fixed on surface in touch with wall including 1.5 sqmm (nominal area) copper conductor PVC insulated, unsheathed, multi stranded FRLS cable as earth wire and connected to earth dolly complete all as specified and as directed including cutting chases to wall and making good the disturbed surfaces to match with the existing specifications complete all as specified. |
| 98 | Supply and fix modular switch,1way, 1 modole 6 Amp single pole,oneway complete all as speciifed and as directed |
| 99 | S & F 3 pin, 6 A, 250 V ceiling rose conforming to IS 371: 1999 and having terminal capacity 3 X 1.5 mm² with IK 04 and IP 20 protection complete all as specified in IS 732: 2019 and directed by the engineer-in-charge. |
| 100 | Supply and fix wall mount fan made of sturdy Engineering plastic complete with MS guard, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed by engineer-in-charge.Make : Atombar/Usha/Bajaj/Cromption |
| 101 | S&F Ceiling fan complete with blades, white colour, with down rod, including all accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) complete all as specified and as directed.Make : Atombar/Usha/Bajaj/Cromption Please Enable Macros to View BoQ information |
| 102 | S&F Ceiling fan complete with blades, white colour, with down rod, including all accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) complete all as specified and as directed.Make : Atombar/Usha/Bajaj/Cromption Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender