Tender For special Repair To Bldg No. T-9, T-10 And T-11 And Single Or Living Otm Accn Bldg No. P-130 At Certain Unit At Army Area Jodhpur Under Ge (Army) No. 01
Tender Value
1.41 Crore
Estimated cost
Bid Submission
16 Nov 2026
4 days left
EMD
2.16 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No. T-9, T-10 And T-11 And Single Or Living Otm Accn Bldg No. P-130 At Certain Unit At Army Area Jodhpur Under Ge (Army) No. 01
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Oct-2026 | CorrigendumNo.02 | Date | 16-Nov-2026 |
| 2 | 27-Oct-2026 | CorrigendumNo.01 | Date | 09-Nov-2026 |
| 3 | 27-Oct-2026 | CorrigendumNo.01 | Date | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully cement concrete/ spalled out concrete from RCC roof projections,Ceilings,Sunshades of beams etc upto cover depth by chipping out lightly including necessary scaffolding at height up to 7.5 mtr etc complete all as specified and directed by Engr-in-charges. |
| 2 | M&L for cleaning, sweeping out loose materials from the existing reinforcement of slabs, chajjas etc & applying a coat of SIKA RUSTOFF 11 or equivalent of pidilite,fosroc,Thermax etc to remove rust particles etc throughly cleaning the surface.complete all as specified and directed by Engr-in-charges. |
| 3 | M&L for applying a coat of bond coat made with cement slurry (1part cement to 1.5-2parts water) mixed with admixture LATEX POWER mixed @ 5 Kg per 50kg of cement & applying to the concrete surfaces @200gm/sqm to obtain tack.complete all as specified and directed by Engr-in-charges. |
| 4 | M&L for 15-20mm thick rendering in CM 1:1:2 using 1 part cement to 1part 2-3mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed SIKA PLASTOCRETE admixture equivalent of pidilite, fosroc, Thermax etc @100gm/50kg of cement & finishing the surfaces even & rough to recieve final rendering coat.complete all as specified and directed by Engr-in-charges. |
| 5 | M&L for 10-15mm thick rendering in CM 1:3 over the bond coat applied surfeces with cement mixed SIKA PLASTOCRETE SUPER admixture @100gm/50kg of cement & finishing the surfaces even & smooth complete all as specified and directed by Engr-in-charges. |
| 6 | S&F GI chicken wire mesh of 0.71mm dia wire & 12mm mesh size fixed with nails & screws around RCC chajjas /facias, slabs, beams etc complete all as specified and directed by Engr-in-charges. |
| 7 | Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-charges. |
| 8 | M&L for 15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified and directed by Engr-in-charges. |
| 9 | M&L for rendering 15 mm thick in two layers of 10mm thick on stone masonry surface in CM 1:6 and top layer of 5 mm thick in CM1:4 incl finishing the surface smooth and even without using extra cement and using integral water proofing compound in top layer .complete all as specified and directed by Engr-in-charges. |
| 10 | M&L Rendering 10 mm thick in CM (1:3) on concrete surfaces on ceiling / facia /RCC Chajjas etc all as directed & finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charges. |
| 11 | Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr-in-charges. |
| 12 | M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed by Engr-in-charges. |
| 13 | Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articlescomplete all as specified and directed by Engr-in-charges. |
| 14 | M&L for Squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 15 | All as per item No 14 above but except stone complete all as specified and directed by Engr-in-charges. |
| 16 | Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed by Engr-in-charges. |
| 17 | M&L PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and directed by Engr-in-charges. |
| 18 | M&L for Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping to walls/ roof kerbs/ rounded or chamfered on edges including necessary form work complete all as specified and directed by Engr-in-charges. |
| 19 | M&L for cutting in to old masonry to form toothings for and bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 20 | M&L sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm complete all as specified and directed by Engr-in-charge. |
| 21 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for 25 mm thick PCC type B-0 1:2:4 (12.5 mm graded aggregate) as in sub bases floors of tiles complete all as specified and directed by Engr-in-charges. |
| 23 | M&L for non-skid coloured ceremic tiles joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 24 | All as per item No. 23 above but skirting includig 10 mm thick rendering in CM 1:3 complete all as specified and directed by Engr-in-charges. |
| 25 | M&L non skid ceramic colour joint free tiles 6 to 7 mm thick of size area exc 0.11 Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-charges. |
| 26 | M&L for glazed colour ceramic tiles of size 300x 600x 7-8mm/ 450X 350X 7-8mm, laid in vertical surface of dado/ skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles includig 10 mm thick rendering in CM 1:3 complete all as specified and directed by Engr-in-charges. |
| 27 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed by Engr-in-charges. |
| 28 | M&L for 18-20mm thick machine cut Kota stone slab as in flooring staircase, riser & treads of steps etc over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing, grinding and polishing including 20mm thick screed bed in cement mortor 1:4 complete all as specified and directed by Engr-in-charges. |
| 29 | Ditto as per Item No. 28 above but herein riser of steps, skirting, dado and pillar laid over including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-Charges. |
| 30 | M&L Udaipur Green marble 16-18mm thick as in cills, platforms of WHB, treads of steps etc over cement screed 15mm thick in cement mortar 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding, rounding to edges and mirror polishing complete all as specified and directed by Engr-in-charges. |
| 31 | M&L Udaipur Green marble 16-18 mm thick (table rubbed and polished) in riser of steps, jambs, pillars and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 10mm thick plaster 1:3 complete all as specified and directed by Engr-in-charges. |
| 32 | M&L for 18-20 mm thick Black granite stone as in cooking platforms, slabs for oval type WHB,sinks/cills etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & rounding to edges of stone slabs one edge providing complete all as specified and directed by Engr-in-charges. |
| 33 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-charges. |
| 34 | Complete removal of existing treatment and preparation of wall surfaces of any description complete all as specified and directed by Engr-in-charges. |
| 35 | M&L for Preparation of new or un-decorated plastered/ concrete of ceiling and applying three coat of white wash complete all as specified and directed by Engr-in-charges. |
| 36 | M&L for Preparation of old decorated plastered/ concrete of ceiling and applying one coat of white wash complete all as specified and directed by Engr-in-charges. |
| 37 | M&L for Preparation of old decorated plastered/ pointed /concrete of walls and applying three coat of white wash complete all as specified and directed by Engr-in-charges. |
| 38 | M&L for applying 2 coats of Oil Bound distemper over 1.5mm to 2mm thick wall putty finished to a even and smooth finish over a coat of alkali resistant primer complete all as specified and directed by Engr-in-charges. |
| 39 | M&L for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charges. |
| 40 | M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed. |
| 41 | M & L applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed by Engr-in-charge. |
| 42 | M & L for mild steel framed work as in brackets etc for cooler stands,supportings frame work for sun shade etc framed steps/ stairs/ledder/cooler stand etc using MS railing /angle iron Steel bars gusset plate etc complete all as specified and directed by Engr-in-charge. |
| 43 | M &L for fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of syn enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all as specified and directed by Engr-in-charge. |
| 44 | Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm re-fixing in the same opening after necessary repair like easing etc. complete all as specified and directed by Engr-in-charge. |
| 45 | Taking down chowkhats or frames with shutter exc 1.5 Sqm but not exceeding 4 Sqm each without taking off shutter from the frame complete all as specified and directed by Engr-in-charge. |
| 46 | Taking down chowkhats with shutters (without taking off shutters from the frames) area nexc 1.50 Sqm & removal to store complete all as specified and directed by Engr-in-charge. |
| 47 | S&F of pressed steel frames of size 165x60mm for doors with one or more rebates incl necessary fixing lugs,hinges,lock strice plate including a shop coat of red oxide primer etc complete all as specified and directed by Engr-in-charge. |
| 48 | S&F of pressed steel frames of size 105x60mm for doors with one or more rebates incl necessary fixing lugs,hinges,lock strice plate including a shop coat of red oxide primer etc complete all as specified and directed by Engr-in-charge. |
| 49 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 50 | Providing & Fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 51 | S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with both face covered with decorative face veneer/mica with 40x2mm lipping/frame to match, complete all as specified and directed by Engr-in-charge. |
| 52 | S&F 2nd Class hardwood 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-charge. |
| 53 | M&L PCC (1:2:4) type B-0 using 12.5 mm aggregate in filling pressed steel frame, concrete shall be compressed complete all as specified and directed by Engr-in-charge. |
| 54 | Taking down of steel window and ventilators, complete all as specified and directed by Engr-in-charge. |
| 55 | S&F of factory made steel window box type with side hung shutter as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-charge.Note:- Both shutter jointed internally with flat iron 40x4mm complete including grill of 10mm square bars as directed by Engineer in Charge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required)Guard bar/ grill glass and painting shall be measured and paid separately under respective item of Sch 'A'. |
| 56 | S&F of factory made steel window box type with side hung shutter as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 complete without glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-charge.Note:- Both shutter jointed internally with flat iron 40x4mm complete including grill of 10mm square bars as directed by Engineer in Charge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required)Guard bar/ grill wire cloth & painting shall be measured and paid separately under respective item of Sch 'A'. |
| 57 | S&F Factory made box type steel ventilator with glazing bars or without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed by Engr-in-charge. |
| 58 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge. |
| 59 | S & F 4 mm thick pin headed figured glass in small widths as in louvers of ventilators glazing with oil putty in squares n. exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 60 | S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
| 61 | S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Nov 09, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender