Tender For Construction Work Of Four Type-4 Pooled Residences Located In The Dm Colony Of District Bulandshahr
Tender Value
1.65 Crore
Estimated cost
Bid Submission
28 Oct 2026
1 days left
EMD
10.25 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Four Type-4 Pooled Residences Located In The Dm Colony Of District Bulandshahr
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 2.8.1 |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete completion of the work,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 2.27 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 4.1.8 |
| 4 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floorWith Chlorpyriphos/Lindane E.C. 20% with 1% concentration,including supply of all materials,Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no13.81.1 |
| 5 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\\") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 coarse sand 3 grit) in Foundation & excluding supply of reinforcement & its fixing & bending but including its fixing & binding the same necessary with 24 BWG binding wire & including supply of all materials,Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST. As per DSR no 5.1.2 |
| 6 | R.C.C work with cement approved coarse sand and 2 cm. (3/4\\") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 coarse sand 3 grit) in Lintel & excluding supply of reinforcement & its fixing & bending but including its fixing & binding the same necessary with 24 BWG binding wire,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 5.3 |
| 7 | R.C.C.work with cement approved coarse sand & 2 cm (3/4\\") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 coarse sand 3 grit) in Beam & excluding supply of reinforcement & its fixing & bending but including its fixing & binding the same necessary with 24 BWG binding wire including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 5.3 |
| 8 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\\") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 coarse sand 3 grit) in Slab & excluding supply of reinforcement & its fixing & bending but including its fixing & binding the same necessary with 24 BWG binding wire including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 5.3 |
| 9 | R.C.C.work with cement approved coarse sand & 2 cm.(3/4\\") guage approved stone ballast in the proportion 1:1.5:3,(1cement :1.5 coarse sand 3 grit) in Column & excluding supply of reinforcement & its fixing & bending but including its fixing & binding the same necessary with 24 BWG binding wire including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 5.2.2 |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in.foundation & plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand) including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 6.1.2 |
| 11 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 6.4.2 |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 6.4.1 |
| 13 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to |S : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: With average thickness of 120 mm and minimum thickness at khurra as 65 mm.including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 22.7.1 |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood,including applying including supply of all materials,Labour,T&P etc & alsoincluding supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 9.1.1 |
| 15 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:-30mm thick including ISI marked Stainless Steel butt hinges with necessary screws,including applying iincluding supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 9.21.1 |
| 16 | Providing and fixing ISI marked 35 mm flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with one side decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick.including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no (9.21.1+9.127.1) |
| 17 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured),including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 9.23 |
| 18 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges & necessary screws :35 mm thick shutters With ISI marked stainless steel butt hinges of required size Second class teak wood,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST. As per DSR no 9.27.1.2.1 |
| 19 | Mild steel or iron work of small sizes and sections such & holding down bolts, hold fast tierods,gratings etc.( when not included in an over all rates) wrought to required from including supply of steel & its wastage including cost of bolts, nuts if required for welding, grinding & making holes as required completion of work fabrication of holes doors, chaukhats nosing,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST Fabrication of hold fast for door chaukhats and windows.As per DSR no 10.1 |
| 20 | Mild steel or iron work of small sizes and sections such & holding down bolts, hold fast tierods,gratings etc.( when not included in an over all rates) wrought to required from including supply of steel & its wastage including cost of bolts, nuts if required for welding, grinding & making holes as required completion of work fabrication of holes doors, chaukhats nosing,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST Fabrication of Grill and Staircase Railling. As per DSR no 10.25.2 |
| 21 | Providing and fixing fly and Mosquito proof stainless steel grade 304 wire mesh gaugewith 0.5 mm dia wire and 1.4 mm wire aperture including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no 9.51.2 |
| 22 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc.wherever necessary complete :25 mm dia including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 9.46.3 |
| 23 | Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/ Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat & 2 nos on each vertical member of window chowkhats) ,including Cost of dash fasteners/ chemical fastener,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 14.3 |
| 24 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 5.22.6 |
| 25 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth 1 cement : 6 Coarse sand including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no13.5.1 |
| 26 | 15 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. 1 cement : 6 Coarse sand including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 13.5.2 |
| 27 | 12 mm cement plaster in single coat on FAIR side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth.1 cement : 6 Coarse sand including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR no13.4.2 |
| 28 | 25 mm thick Cement concrete floor with cement approved coarse sand and 2cm. Graded approved stone ballast laid in planels finished with 3mm (1/8\\") floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified over and including 8 cm. (3\\") local sand and brick ballast 4 cm. gause in proportion of 1:4:8 and removing any giving then a uniform finish,including supply of all materials, labour, T&P etc. required for proper completion of the work. But without base concreteincluding supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 11.3.1 |
| 29 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. [IN FLOORING]including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 11.41.2 |
| 30 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. [IN SKIRTING]including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 11.47.2 |
| 31 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :[IN FLOORING] including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 11.26.1 |
| 32 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. [IN SKIRTING]including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 11.27 |
| 33 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levelsGranite of any colour and shade Area of slab upto 0.50 sqm,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 8.2.2.2 |
| 34 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing he joints with white cement and matching pigment etc.complete,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 11.37 |
| 35 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand),Jointing with grey cement slurry @ 3.3 kg/sqm including pointing he joints with white cement and matching pigment etc. complete, including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 11.37A |
| 36 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no13.48.3 |
| 37 | Two coat Wax or French polishing new wood work with approved ready made wax polish or approved French polish after rubbing down with sand paper, including supply of all material, labour and tools & plants etc required for proper completion of the work,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no13.69.1 |
| 38 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no13.48.2 |
| 39 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm),including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no13.46.1 |
| 40 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour. New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no13.41.1 |
| 41 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no13.8 |
| 42 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 10.30.1 |
| 43 | Providing & fixing stainless steel sliding door bolts ISI marked required colour or shade with nuts and screws etc complete.250x16 mmm,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST |
| 44 | P/Fixing stainless steel tower bolts ISI marked to required colour or shade with necessary screws etc complete. 250x10 mm,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST |
| 45 | Providing and fixing Stainless Steel handles ISI marked to required colour or shade with necessary screws etc complete. 150mm ,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST |
| 46 | Providing and fixing stainless steel hanging floor door stopper with necessary screws etc. complete. Twin rubber stoper,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 14.34 |
| 47 | Providing and Fixing of Door slincer including necessary screws etc complete,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST . |
| 48 | Providing & fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing & making curvature (wherever required) & fitting the same with necessary stainless steel nuts & bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Eng-in-charge. (weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.),including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no10.28 |
| 49 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm),including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no13.47.1 |
| 50 | Supply and filling of cinder in sunken in portion of building including breaking into required sizes including supply of all material, labour T&P required for proper completion of the work,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST |
| 51 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST as per DSR no 22.3 |
| 52 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe,conforming to IS : 7231,with all fittings & fixtures complete,including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 17.1.1 |
| 53 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR no 17.68.1 |
| 54 | Providing and fixing wash basin with C.l. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer & Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.As per DSR 17.7A+17.8 |
| 55 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi Rigid,32 mm Dia.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 17.28.1.1 |
| 56 | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 17.31 |
| 57 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required,510x1040 mm bowl depth 250 mm Kitchen sink with drain board.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 17.10.1.1 |
| 58 | Providing and fixing PTMT Bottle Trap for Wash basin and sink,Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 17.70.2 |
| 59 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 17.73.2 |
| 60 | Providing and fixing unplasticised PVC connection pipe with brass unions,15 mm nominal bore.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.21.2.1 |
| 61 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931,15 mm nominal bore.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.49.1 |
| 62 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms,15 mm nominal bore.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.51.1 |
| 63 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS:8931,15 mm nominal bore,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST.As per DSR 18.53.1 |
| 64 | Providing and fixing C.P. brass shower rose with 15 or 20mm inlet,150 mm diameter .,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.22.1 |
| 65 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931:15mm nominal bore.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.52.1 |
| 66 | Providing and fixing unplasticised-PVC pipe clips of approved design to unplasticised-PVC pipes by means of 50x50x50 mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.(110mm), including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 12.43.2 |
| 67 | Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand :10 graded stone aggregate 20mm nominal size) around P.V.C Soil & waste pipe including bed concrete as per standard design (embedded in the flooring / ground) (100 /90 mm dia ),including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST .As per DSR 19.2.1 |
| 68 | Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. (110mm)., including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 12.41.2 |
| 69 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 12.44 |
| 70 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning, rounding the edges and making and finishing the outlet complete.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 12.22 |
| 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 25mm dia nominal outer dia pipes , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.8.3 |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm nominal outer dia Pipes , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.7.2 |
| 73 | Providing and fixing gun metal gate valve with wheel of approved quality.40mm dia nominal bore.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.17 |
| 74 | Providing and fixing brass stop cock of approved quality.20 mm nominal bore.,including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GSTAs per DSR 18.16.2 |
| 75 | Providing and placing on terrace (at all floor levels)polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fitting and base support for tank.[Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license], including supply of all materials, Labour,T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST As per DSR 18.48 |
| 76 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density.including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST |
| 77 | Providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing,rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying & brooming, crushable screening to fill-up the interstices of coarse aggregate, watering & compacting to the required density Grading 3 as per Technical Specification Clause 405.including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST |
| 78 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501,including supply of all materials, Labour, T&P etc & also Including All taxes, labour cess, Royalty Etc But Excluding GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender