Tender For Improvement Work Of Critical Crash Location And Criticrash Location Black Spot On (Ch- 0.860, 1.200, 6.200, 11.460, 11.580, 13.070, 15.580, 20.130 And 22.090) On Shahabad Pali Saidpur Road (Odr)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Oct 2026
1 days left
EMD
3.15 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hardoi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Work Of Critical Crash Location And Criticrash Location Black Spot On (Ch- 0.860, 1.200, 6.200, 11.460, 11.580, 13.070, 15.580, 20.130 And 22.090) On Shahabad Pali Saidpur Road (Odr)
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5(Including Labour Cess & Excluding GST) |
| 2 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Including Labour Cess & Excluding GST) |
| 3 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site,spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause303.1(Including Labour Cess & Excluding GST) |
| 4 | Granular Sub-base with Well Graded Material (Table 400.1) (A)By Mix in Place Method Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.(i)For Grading I Material (Including Labour Cess & Excluding GST) |
| 5 | Providing ,Laying ,spreading and compacting stone aggregates of 63-45 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density. (Including Labour Cess & Excluding GST) |
| 6 | Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening to fill up the nterstices of coarse aggregate ,watering and compacting to the required density (Including Labour Cess & Excluding GST) |
| 7 | Brick Edging on edge of both sides of the road including al Labour material etc complete.(Including Labour Cess & Excluding GST) |
| 8 | Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/sqm usingmannual means .(Including Labour Cess & Excluding GST) |
| 9 | Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 to 0.45 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503.(Including Labour Cess & Excluding GST) |
| 10 | 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508.(Including Labour Cess & Excluding GST) |
| 11 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 A.By Manual Means (Including Labour Cess & Excluding GST) |
| 12 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.2 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.(Including Labour Cess & Excluding GST) |
| 13 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (Including Labour Cess & Excluding GST) |
| 14 | Providing and laying of Hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level, uniform and free from streaks and hole, complete as per Technical Clause 803 of MoRTH Specification.(Including Labour Cess & Excluding GST) |
| 15 | Providing and laying of Hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level, uniform and free from streaks and hole, complete as per Technical Clause 803 of MoRTH Specification.Ripeted bar (Including Labour Cess & Excluding GST) |
| 16 | CAUTION BOARDProviding and erecting direction and place identification retro-reffectorised sign as per IRC-67 made of high intensity grade sheeting vide clause801.3 fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm. Supported on a miled steel single angle iron post 75×75×6 mm finmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45×45×60 cm. below ground level as per approved drawing , complete. (90×90 cm) .(Including Labour Cess & Excluding GST) |
| 17 | For Stop SignProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post (Including Labour Cess & Excluding GST) |
| 18 | Providing and fixing of Cat Eyes 3M/Equivalent brand markers series 290 (Cat Eyes) (Red/Yellow Coulor) it made of polycarbonate both side Retro Reflection are electronically welded prismatic retro reflection lens for maximum reflection in both condition w (Including Labour Cess & Excluding GST) |
| 19 | Maximum Speed LimitProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iro (Including Labour Cess & Excluding GST) |
| 20 | Place identification BOARDProviding and erecting direction and place identification retro-reffectorised sign as per IRC-67 made of high intensity grade sheeting vide clause801.3 fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm. Supported on a miled steel single angle iron post 75×75×6 mm finmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45×45×60 cm. below ground level as per approved drawing , complete. (90×90 cm) .(Including Labour Cess & Excluding GST) |
| 21 | Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings.(Including Labour Cess & Excluding GST) |
| 22 | HAZARD MARKERProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post (Including Labour Cess & Excluding GST) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender