Tender For Improvement Of Azad Nagar Intersection Under Road Safety Initiatives In Amethi District For The Financial Year 2025-26
Tender Value
18 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
4 days left
EMD
1.80 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sultanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Azad Nagar Intersection Under Road Safety Initiatives In Amethi District For The Financial Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning Jungles including uprooting of rank vegetation grass, bushes, wood trees and sapling of girth upto 30cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters out side the periphery of area cleared. |
| 2 | Excavation in foundation in ordinary soil (Loam, Clay or Sand) including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. |
| 3 | Same as above Item No.-1 but carted earth from a distance of 5 KM Distance |
| 4 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. |
| 5 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. |
| 6 | Priming Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of raod surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per technical specification clause-502 |
| 7 | Providing and applying tack coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm over bitumens surface on the prepared for bituminous surface cleaned with mechanical broom. On bitumens surface |
| 8 | Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. |
| 9 | Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects |
| 10 | Scarifying existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and leads upto 1000 m as per technical specification clause 301.4 |
| 11 | Rubber Moulded Cement concrete Kerb stone M-20 Size 12\\"×16\\" ×6\\" (Plain) |
| 12 | Providing and laying of hot applied thermoplastic compound 2.50 mm thick including reflectrorising glass beeds @ 250gms per sqm area thickness of 2.50mm is excludive of surface applied glass beeds as per IRC:35. The finished surface to be level, uniform and free from streaks and holes (chapter 27, item no.-1) |
| 13 | Providing and laying of hot applied thermoplastic compound 5mm thick including reflectrorising glass beeds @ 500gms per sqm. Area, thiclness of 5mm is exclusive of surface applied glass beeds as per IRC:35. The finish surface to be level, uniform and free from streaks and holes. composition of thermoplastic meterial shall be as per table 800-3 of clause 803 of MORTH including cost of all meterial, labour, T&P etc. require for proper completion of work as direction by engineer-in-charge. |
| 14 | Supply, Fixing & erection of built up Cantiliver Structure 6m span complrising of one vertical posts of 6.00M height made up of 300mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top & 12mm MS plate at bottom. The horizontal truss shall comprise of 50mm dia heavy class MS pipe and 40mm dia heavy MS pipe as bracing & 10mm MS plate at bottom for fixing to vertcal post as per structure design & drawing with one of steel primer and two coats of syntheic enemel plant. The work includes construction of RCC foundation of size 90×90m of required depth as per site condition for built up structure including earth work in excavation 100mm thick lean concrete in 1:4:8 cement coarse sand and 40mm guage stone ballast. RCC with hand 1:2:4 cement coarse sand and 20mm guage stone grit including supply and fixing of 25mm dia foundation bolts 600mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearance and complete. Installation work shall be as per relevant cluases of MORTH specification section 800 and IRC 67 2010 complete in all respect. The rates shall include cost of design fabrication supply, transportation, local shifting erection of signage structure using crane, inclusive of all taxes royalty, VAT etc all T&P machine, material and labour required for proper completion of work as per direction of E/I. |
| 15 | Supply and Fixing of Retro Relective Signboard in size of 6.10 X 1.88 M made of 4mm thick Aluminum Composite panel face to be fully covered with High Intensity prismatic retro reflective sheeting as per ASTM D-4956 type IV in required colour. The retro reflective sheet shall be processed on substrate by 3m equipment heat lamp vacum applicator and letters, signs & symbol shall be fabricated out of High intensity Prismatic retro reflective type IV sheeting with text matter and border of same sheeting. signboard is to be supplied along with back supported anlge iron frame and proper clamping arrangement mounted on a post of channel iron 75x40x5mm along with proper nut & bolting system all electric fully welded & painted. rear of sign shall be with gray colour and the white strips of 250mm width as per direction of E/I signboard shall be fixed in P.C.C. in proportion of 1:2:4 cement, coarse sand, of 2cm gauge stone grit including excavation, also including all labour, material and T&P etc required for proper completion of the work. signboard shall be fabricated in according with IRC-67-2012 and as per direction of E/I. |
| 16 | Supplying and installation of delineators (road way indicators, hazard markers, object marker) 80-10cm, high above ground level, painted black and white in 15cm, wide strips, fitted with 80x100 mm rectangular or 75 dia circular reflectorised panel at the top buried or pressed into the ground and conforming to IRC:79 and the drawing. and E-in-c Circular N0.62 issude wide letter no. 879/MT/60MT/2019 dt. 16.01.2019 |
| 17 | Supply and fixing of raised pavement marker (cat eye) of approved quality of spring poly strength with curve corner technology made of USA prismatic lens fix with bituminous adhesive as per MORT&H specification, at an interval of 6.0 meter. |
| 18 | Road Signages Triangular Signages |
| 19 | Rectangulat Signages |
| 20 | Stop Sign |
| 21 | Two-way hazard Marker |
| 22 | Circular Signages |
| 23 | One Way Hazard Marker Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender