Tender For Providing Of Overhead Cover Shed Alongwith Hard Standing At Bandipur Under The Aor Of Ge 874 Ews.
Tender Value
42 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
10 days left
EMD
84000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Overhead Cover Shed Alongwith Hard Standing At Bandipur Under The Aor Of Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for excavation in trenches n.exc 1.5m in depth and 1.5m in width and getting out in hard' dense soil complete all as specified and directed. |
| 2 | M&L for providing cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, mass concrete and filings complete all as specified and directed. |
| 3 | M&L for form work to side of concrete in foundations, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed. |
| 4 | M&L for form work to side of columns and similar work complete all as specified and directed. |
| 5 | M&L for providing reinforcement cement concrete M-30 (Design Mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed. |
| 6 | M&L for providing reinforcement cement concrete M-30 (Design Mix) as in columns and pillars etc complete all as specified and directed. |
| 7 | M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed. |
| 8 | M&L mild steel TMT bars 5 to 10mm dia a as in stirrups, spacers and binders complete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed. Note :- (WPC shall be measured and paid separately) |
| 10 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 11 | S&F Mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 12 | S&F mild steel work as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed. |
| 13 | M&L for mild steel bolts purpose made with hexagonal or square head on end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and on hexagonal or square nut exc 30cm long complete all as specified and directed. |
| 14 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 15 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 16 | M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide/zinc chrome primer complete all as specified and as directed. |
| 17 | M&L for Soling or sub base 200 mm spread thick with broken boulders or quarry stone granite filled surface formed and rolled consolidated required gradient and camber complete all as specified and directed. |
| 18 | M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 200 mm all as specified and directed. |
| 19 | M&L for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound grade A thickness of concrete is 250 mm complete all as specified and directed. |
| 20 | M&L for forming contraction dummy joints 65mm deep & 10mm wide filled with pr-formed bituminous filler and top30mm primed and sealed with sealing compound grade A complete all as specified and directed. |
| 21 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed. |
| 22 | Removing excavated material (soil) n. exc 50m and deposited where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 23 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil for roads to required slope gradient, camber etc complete all as specified and directed. |
| 24 | M & L for hardcore of broken stone or boulders of gauge n.exc.63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 25 | M&L for 75mm thick cement concrete (1:3:6) type C-2, using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 26 | M&L 60mm thick, machine pressed precast concrete interlocking paver block, with grey cement and pigment, any shape and size confirming to IS 15658-2006, M-35 Grade complete all as specified and directed. |
| 27 | M&L for 25 mm sand cushion under paving block including watering and consolidation for interlocking tiles complete all as specified and directed. |
| 28 | M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, kneelers, apex stone, bed plates and the like including weathering slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 29 | M&L for Reinforced cement concrete pipe Class NP-3 laid and jointed complete with collar bore of pipe 450mm complete all as specified and directed. |
| 30 | Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed. |
| 31 | Earth work in all kind of soil excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and directed. |
| 32 | M & L PCC 1:3:6, type C-2 in foundation, filling and mass concrete (using 40 mm graded crushed stone aggregate) complete all as specified and directed. |
| 33 | M&L for walling of random rubble masonry uncoursed, well bonded and solidly hearted built in CM 1:4 complete all as specified and directed. |
| 34 | M&L for rendering 15 mm thick in CM 1:4 on stone masonry surfaces or surfaces of other than fair faces of brickwork and finishing even & smooth without using extra cement complete all as specified and directed. |
| 35 | M&L for cement concrete (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement complete all as specified and directed. |
| 36 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds, mitred /stopped ends etc complete all as specified and directed. |
| 37 | Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths /drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection of sizes 16 sqmm 2.0 core complete all as specified and directed. |
| 38 | Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:- Punned thickness only shall be measured and paid. |
| 39 | Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed. |
| 40 | Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable protection of size 50 mm bore ;- (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule ):- |
| 41 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 42 | M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/ conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc, covered with plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed. |
| 43 | All as per item No 42 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. |
| 44 | All as per item No 42 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for switch socket combination 3 pin 5 amps on independent board. |
| 45 | All as per item No 42 herein before but wiring with 2.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board. |
| 46 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 47 | S&F switch piano flush button single pole, one way 15 amps complete all as specified and directed. |
| 48 | S&F Socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed. |
| 49 | S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed. |
| 50 | S & F switch socket combination 3 pin 5A, flush type complete all as specified and directed. |
| 51 | S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. |
| 52 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, complete all as specified and directed. |
| 53 | S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 54 | S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 55 | Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 56 | Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender