Tender For Addition/Alteration To U Block (Bldg No Np-27) At 39 Wing Under Ge (Af) Udh Ur
Tender Value
43.26 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
7 days left
EMD
86600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To U Block (Bldg No Np-27) At 39 Wing Under Ge (Af) Udh Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Oct-2026 | CERTAIN CHANGES IN TENDER DCOUCS | BOQ | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 Sqm, complete all as specified. |
| 2 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified. |
| 3 | Demolition of brick work or stone masonry built in cement mortar including all quoines arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified. |
| 4 | M&L brick work with sub class B bricks straight or curved on plan exc 6m redius in CM 1:6 complete all as specified and as directed. |
| 5 | Taking down cement plaster of any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off complete all as specified and as directed.(Note: Height of the work upto 20.00 m) |
| 6 | M & L for Rendering 15mm thick in cement mortar 1:4 on other than fair faces of Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Note: Height of the work upto 20.00 m) |
| 7 | M&L for rendering 15 mm thick CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement complete all as specified and as directed.(Note: Height of the work upto 20.00 m) |
| 8 | Finishing walls with Acrylic Smooth exterior paint of required shade new or old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 9 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new or old work complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for preparation of new surfaces of existing wall surfaces and applying two coats of white wash on wall surfaces complete all as specified and as directed. |
| 11 | M&L for dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as speified and directed. |
| 12 | Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles with semi perforated 12 mm thick nicro tegular edged GRG false ceing tiles of size 595 x 595 mm of approved texture, designand patterns having moisture content less than 2%, humidity resistance of 99%,NRCO 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476(part 4)-1970 and light reflectance of 85%(minimum) to be laid in true horizontal level suspended on iterlocking metal T-Grid of hot dippped galvanised iron section of 0.33 mm thick(galvanised @120 grams per Sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000 mm, cross T of size 15 x 32 mm of length 600 mm to form grid module of size 600x 600 mm,suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners,6 mm dia fully threaded hangar rod upto 1000 mm length and L-shape level adjuster of size 85 x 25 x 2mm. Galvanised iron perimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws/ suspended from MS frame work complete all as specified. |
| 13 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed in ant type of mortar complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Demolition of cement concrete (unreinforced) as in ground floor & paving n exc 15cm thick below or above ground level complete all as specified and as directed. |
| 15 | M & L for Cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) 25mm thickness as in floor for laying tiles brushing with neat cement slurry @ 3.00 Kg/Sqm complete all as specified and as directed. |
| 16 | M&L for Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 100mm thickness as in floor, paving, sub- bases etc. complete all as specified and as directed. |
| 17 | S&F Plastic dividing strips 1.5mm thick,40mm wide and inserted in position, conform to design complete all as specified and directed. |
| 18 | S&F Providing precast cement concrete (Type B0 1:2:4, 12.5mm graded aggregate) louvres and jallies, 25mm thick (measured solid) set in cement mortar 1:4, including all mouldings but excluding frame) complete all as specified and directed. |
| 19 | M&L for Non-skid Coloured Ceramic Tiles (Square/rectangular) area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, 7-8mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and as directed. |
| 20 | M&L for Dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bedding layer of 15 mm thick in CM 1:6, complete all as specified and as directed. |
| 21 | M&L for Dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 10 mm thick in CM 1:3, complete all as specified and as directed. |
| 22 | M & L for Glazed coloured ceramic tiles in vertical surface 450x300x7 mm/350x 250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thk screed bed in CM 1:3, complete all as specified and as directed. |
| 23 | M&L machine cut Kota stone slab flooring 18-20mm thick, laid over and incl 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding and polshing to achive mirror finish complete all as spd. |
| 24 | M&L machine cut Kota stone slab in riser of steps,skirting,dado and pillar, 15mm thick, mixed with pigment to match the shade of the slab incl 10mm thick cement screed /rendering in CM 1:4 incl cutting, rubbing, grinding and polshing to achive mirror finish complete all as spd. |
| 25 | M&L for mirror polishing on marble/granite/kota stone/stone work where ever required to give high gloss finish complete all as specified and directed. |
| 26 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade withgrey cement and pigment complete all as specified and as directed |
| 27 | M&L for sand cushioning 50mm thick under floor or in foundation including watering and consolidation, complete all as specified and as directed. |
| 28 | M&L for PCC 1:4:8 type D-2 75 mm thick (using 40mm graded aggregate) as in sub base layer, complete all as specified and as directed. |
| 29 | M & L 18-20 mm thick granite(of any type) work (table rubbed and polished) in steps, jambs,pillars,window cills,cooking platforms and the like in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite |
| 30 | M & L to edges of stone slabs/granite one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge. |
| 31 | Dismantling of AC (Corrugated, Semi Corrugated etc)/CGI or any type of sheets in roof covering complete.(Note: Work will be carried out up to a height of 22 m from GL). |
| 32 | S&F plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and as directed.(Note: Work will be carried out up to a height of 22 m from GL). |
| 33 | Pre-painted galvalume corrugated aluminum zinc coating GI based steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified(Note: Work will be carried out up to a height of 22 m from GL). |
| 34 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified. |
| 35 | S&F Factory made Solid Panel PVC Door Shutter 30 mm thick consisting of frame made out of MS tubes for Top & bottom nails MS framed shall be covered with neat moulded plain coloured PVC 'C' channel having PVC sheet ship if 20 mm width stuck inside with solvant cement for style and plain colour PVC shutters for top rail lock rail and bottom rail on edges side & gap insert for top rail bottom rail panelling of plain colour PVC sheet truck and nail with suitable PVC sheet bedding and jointed to shutter with solvent gear supply and fixing in the frame at site complete all as specified. |
| 36 | S&F in repairs Vitreous China half stall urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs withand including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 37 | S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 38 | S&F in repairs High density polyethylene (HDPE) pipes of 32mm bore of pressure rating 6 kgf/sq. cm complete all as specified and as directed. |
| 39 | Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. |
| 40 | S&F in repair seat cover for pedestal pan white / black closed pattern with flat bottom and cover and MS chromium plated aluminium hinge devic, complete all as specified and as directed. |
| 41 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 42 | S&F in repair Vitreous china Wash Hand Basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted/erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified. |
| 43 | Supply and fixing of counter top wash basin of approved make white vitreous china/ceramic, size approximately 550–600 mm, mounted on existing/new counter top, including waste coupling, CP brass bottle trap, inlet and outlet connections, silicone sealing, cutting and finishing of counter top as required, all accessories, labour, tools and plants,complete and functional in all respects as directed by Engineer-in-Charge |
| 44 | S&F in repairs vitreous china wash down Water Closet white squatting pan Orissa pattern size 580x440mm with integral foot rest incl making necessary connections to soil pipes and flushing cistern complete all as specified and as directed. |
| 45 | M&L for PVC Flushing Cistern 10 litre capacity low level valve less, symphonic action type white with inlet, ball valve, flaoat and handle including 32mm dia PVC Flush pipe a pair of cast iron brackets duly painted/erecting stand including cutting and pinning in ends, making good disturgbed surfaces in cement mortar 1:3 including taking down unserviceable flushing cistern complete all as specified and directed. |
| 46 | S&F in repair angular Stop/Angle valve fancy type chromium plated,screwed down, high pressure with crutch or butterfly handle 15mm bore, complete all as specified and as directed. |
| 47 | S&F in repairs Pillar cock 15mm bore fancy type chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed and fly-nuts screwed for iron pipe or brass ferrule complete all as specified and as directed. |
| 48 | S&F in repair Looking mirror 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 49 | S&F in repair CP Grating doom 100mm dia complete all as specified and directed. |
| 50 | M&L for PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections, complete all as specified and as directed. |
| 51 | S&F in repair CP Towel Rail 600mm long fancy type fixed with and including chromium plated brass screws and plastic cleats complete all as specified and directed. |
| 52 | S&F in repair CP Soap Dish fixed in wall complete all as specified and as directed. |
| 53 | S&F in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, including supply and fixing to stainless steel 450mm long shower arm, complete all as specified. |
| 54 | S&F in repair, Bib taps cast copper alloy 15mm bore, fancy type Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions, complete all as specified and as directed. |
| 55 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm/ 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made. |
| 56 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and including fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 57 | S&F 30mm thick factory made WPC (wood polymer composite) skeleton door shutter of approved make and manufacture, made from high quality virgin WPC material conforming to required standards, having K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and comprising WPC outer frame and internal skeleton with necessary lock rail, infilled with suitable core material, the shutter shall be machine fnished with smooth surface on both sides and including the fixing of shutter to frame with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete including cutting, making holes for fittings, embedding hardware, Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed by Engr-in-Charge. |
| 58 | S&F powder coated (50 micron thick)/ anodized (15 micron thick) aluminium sliding window as per IS 1868 of approved make and colour, 2-track/3-track as specified, fabricated from aluminium extruded sections conforming to IS 733 and IS 1285 specifications, comprising outer frame, sliding shutters, interlocking sections, glazing beads, rollers, nylon guides, handles, locking arrangement, weather strips, EPDM rubber gaskets, screws, cleats, glazing/gauzing and all other necessary fittings and fixtures complete. The window shall be fitted with decorative aluminium grill of approved design and pattern, securely fixed to the frame/opening with necessary holdfasts, lugs, fasteners and anti corrosive treatment to cut ends and welded portions. The item includes cutting, fabrication, assembly, transportion, erection, fixing in position, sealing of joints with approved sealent, making good disturbed portion, cleaning and finishing complete in all respect as directed by Engr-in-charge. |
| 59 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete in all respect as directed by Engr-in-charge. |
| 60 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified complete in all respect as directed by Engr-in-charge. |
| 61 | S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 62 | S&F Floor door stopper of 140mm aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified. |
| 63 | S&F 100mm long Butt Hinges extruded aluminium alloy with Galvanised mild steel hinge pin, anodised and fixed complete all as specified and as directed. |
| 64 | S&F 150mm long Extruded aluminium alloy Handles, fabricated type, anodisedcomplete all as specified and as directed. |
| 65 | S&F 200mm long Aluminium anodised, barrel Tower Bolts of extruded section and fixed complete all as specified and as directed. |
| 66 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 67 | S&F of approved quality stainless steel curtain rod of 25mm diameter complete with brackets and end side funnels include all necessary fixing accessories like screws, rawl plugs, wall plugs and taking down complete all as specified and directed by Engr-in-Charge. |
| 68 | Taking down eaves gutters rainwater pipes, pvc pipe layed under floor (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified. |
| 69 | S&F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified. |
| 70 | S&F 110mm bore PVC(SWR) bends any radius, complete all as specified. |
| 71 | S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified & as directed. |
| 72 | S&F PVC (SWR) bends 75mm bore complete all as specified and as directed. |
| 73 | S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) and its demolition complete all as specified and as directed. |
| 74 | Taking up or down 15mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified . |
| 75 | S&F for steel water tubing of nominal bore 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified. |
| 76 | Taking up or down 20mm bore of steel tubing with connections for cleaning for refixing or removing to store/yard complete all as specified . |
| 77 | M&L for steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified. |
| 78 | Dismantling and removing to water storage tanks of capacity exc 250 & not exceeding 500 liters and removing to stores complete all as specified . |
| 79 | S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories, complete all as specified. |
| 80 | Disconnecting existing water tanks exc 250 & n.exc 500 Ltr capacity, setting aside (or lowering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position, complete all as specified and directed. |
| 81 | Disconnecting existing water tanks exc 500 & n.exc 1000 Ltr capacity, setting aside (or lowering if required ) and cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes and reconnecting and re-fixing in position, complete all as specified and directed. |
| 82 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, circular pipe, channel or flat sections) including distance pieces, cleats etc. complete all as specified.(Fe 410 -W (Gde- E- 250) quality- AFe) |
| 83 | M&L for Preparation of new steel iron surfaces of any descripotion over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and as directed. |
| 84 | Demolition of reinforced(reinforcement cut as required to facilitate demolition) cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge. |
| 85 | Reinforced cement concrete 1:2:4, type B-1 ( using 20 mm graded crushed stone aggregate ) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like and mass complete all as specified. |
| 86 | M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in lintels up to 1.50m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing up to 60cm in height, copings kneelers, apex stones and mass concrete incl necessary form work, complete all as specified and as directed. |
| 87 | Formwork for rough finished surfaces of concrete (flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 88 | S/F mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing |
| 89 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in deep for foundation etc, or for shafts,wells, cesspits, manholes etc,not exceeding 10 Sqm on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specified and directed. |
| 90 | All as per item No 89 here-in before but for depth exc 1.5 and n exc 3.0 m soft/disintegrated rock. |
| 91 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed by Engineer-in-Charge. |
| 92 | Removing excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point, spreading and leveling complete all as specified and directed by Engineer-in-Charge. |
| 93 | M & L for PCC 1:4:8,Type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engineer -in-Charge. |
| 94 | M&L for 150mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation/mass concrete. |
| 95 | M & L for Plain Cement Concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in bed of drain pipes 150mm bore, laid to falls including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge. |
| 96 | Demolition and breaking up 150mm internal dia drain pipes (salt glazed stone ware, AC or Reinforced concrete pipes) set in cement mortar complete all as specified and as directed by Engineer-in-Charge. |
| 97 | M & L for DWC(double walled corrugated) drain pipes non pressure with OD 160-180 mm and ID 132-150 mm laying pipes to level or to falls in trenches, on concrete bed or directly on hard grounds, jointing and testing as per manufacturer's instructions, complete, all as specified. |
| 98 | Cutting into existing manholes for connecting new drains pipes of 100/150mm internal dia and making good to pipe and rendering , cutting out existing benching for and forming branch channel ( ½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required internal dia of pipe 100/150 mm bore, complete all as specified. |
| 99 | Supply and fixing of ready made fibre reinforced concrete (FRC) manhole cover complete with matching frame , factory made heavy duty, suitable for manholes chambers of approved size and load bearing capacity including embedding/fixing in cement mortar as required complete all as specified. |
| 100 | Supply only of intergral water proofing compound. |
| 101 | M&L for formwork to flat rough finished surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 102 | M&L for formwork to rough finished surfaces of concrete edges of concrete flats, culvertes,slabs,trends,breaks in floors, openngs in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed. |
| 103 | M & L for Reinforced cement concrete Type B 1 1:2:4 (using 20 mm graded stone aggregate (nominal mix) as in partition walls, and the like all as specified and as directed. |
| 104 | M & L for formwork to vertical sides of partion RCC in rough finished rectangular surfaces of conrete. |
| 105 | M& L Plain cement concrete 1:3:6 type B1 (using 20 mm graded stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and including necessary form work complete all as specified and directed. |
| 106 | M & L for Reinforced cement concrete Type B 1 1:2:4 (12.5mm graded) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like |
| 107 | M&L for mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking bending spirally for handle, rungs and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, as in cover slabs all as specified and as directed by engineer-in-charge. |
| 108 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking bending spirally for handle, rungs and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, as in cover slabs all as specified and as directed by engineer-in-charge. |
| 109 | S & F for 100mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches and fixed to walls. |
| 110 | S & F for 100 mm bore cast iron cowls |
| 111 | S&F 150 mm dia single \\"Y\\" or \\"T\\" Junction SWG drain pipes |
| 112 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate for cover slab set in CM 1:6 including necessary form work. |
| 113 | S&F Framed work as in doors/windows or gates or lader of angle or other section with braces, etc complete, drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with also fastening and fixing complete.Fe-410-W (Gde-E-250quality- B. |
| 114 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of primer. |
| 115 | M/Lfor brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as specified and directed. |
| 116 | M/Lfor brick work with sub-class 'B' bricksone one and half brick thick honey comb walls built in in cement mortar 1:4 |
| 117 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landinqs and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat). |
| 118 | Loose filling with broken bricks aggregates of gauge 80 to 150 mm in soakage pits, soakage wells |
| 119 | M & L 100mm thick cement concrete type B1 1:2:4 as in band using (20mm graded aggregate) |
| 120 | M & L 75 mm thick cement concrete type B1 1:2:4 as in band using (20mm graded aggregate) |
| 121 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified and as directed |
| 122 | E/M PORTION |
| 123 | M&Ltaking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 124 | M&L for point wiring complete with PVC insulated and unsheathed cable 1.5 sqmm (nominal area) ISI marked multi-stranded copper conductor single core including ISI marked 20 mm dia 'medium grade' PVC conduit for point wiring concealed in wall/false ceiling with modular concealed box and modular outer and inner sheet suitable for Modular Switch & Socket painting Sunken boxes inside and out side with one coat of red oxide primer complete including 1.5 sqmm PVC insulated and unsheathed ISI marked copper cable to common earth connected to earth dolly colour coding of cable as per IE Rule complete all as specified & directed. |
| 125 | One light/fan/bell point controlled by one switch |
| 126 | All as per serial item No.123.00 here-in-before but for size 1.5 Sqmm on Independent board complete all as specified and directed |
| 127 | All as per serial item No.123.00 here-in-before but for size 1.5 Sqmm on same board complete all as specified and directed |
| 128 | All as per serial item No.123.00 here-in-before but for size 2.5 sqmm for 15 amp socket on independent board complete all as specified and directed |
| 129 | Supply and fix in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of capacity 20 Amp including taking down all as specified and as directed. |
| 130 | Supply and fix modular switch , 1 way 6 Amp, 1 module singe pole one way complete all as specified and directed |
| 131 | Supply and fix modular socket outlet 3/5 pin, 6 amp, 2 module complete all as specified and directed. |
| 132 | Supply and fix modular socket outlet 3/5 pin, 16 amp, 3 module complete all as specified and directed. |
| 133 | Supply and fix modular switch , 1 way 16 Amp 1 module singe pole one way complete all as specified and directed |
| 134 | Supply and fix modular Fan step regulator, 120W, 2 module complete all as specifiedand directed |
| 135 | Supply and fix Ceiling rose, surface bakelite 65 x 50mm, two to three terminals complete all as specified and as directed. |
| 136 | M&L for modular white cover plate with frame 3 module complete all as specified and directed. |
| 137 | M&L for modular white cover plate with frame 6 module complete all as specified and directed. |
| 138 | M&L for modular white cover plate with frame 8 module complete all as specified and directed. |
| 139 | M&L for modular metal flux box 3 module complete all as specified and directed. |
| 140 | M&L for modular metal flux box 6 module complete all as specified and directed. |
| 141 | M&L for modular metal flux box 8 module complete all as specified and directed. |
| 142 | M&L for modular blamking plate complete all as specified and directed. |
| 143 | M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 4.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed in PVC casing caping/ PVC conduit, heavy duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. |
| 144 | M&L in repair Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 6.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed in PVC casing caping/ PVC conduit heavy duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. |
| 145 | M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 10.00 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface cashing capping, heavey duty and connected to main board and making good disturbed surface complete all as specified and as directed. |
| 146 | M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed in PVC casing caping/ PVC conduit , heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. |
| 147 | S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, single door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. |
| 148 | S&F sheet steel powder coated distribution board SPN 12 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, single door with IP 43 protection, suitable for mounting MCBs all as specified and as directed including taking down existing unserviceable DB embedded in wall, grouting the new DB and making good the disturbed surfaces and applying finishes to match the existing all as specified and as directed. |
| 149 | Supply and fix factory made 4 way, V TPN DB, IP-43 protection-IK09 with metal double door with 160 Amps copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of DPX 160 MCCB as incomer and included with SP/TP MCB's as outgoing complete all as specified and directed |
| 150 | Supply and fixing MCCBs 160 Amps capacity, 415 volts, 4 pole, 25 KA, thermal magnetic complete all as specified and directed. |
| 151 | M&L in repair MCB SPN 40 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. |
| 152 | M&L in repair MCB SP 6-32 Amps, 240 Volts, having breaking capacity 10 kA, 'C' characterstic complete all as specified and as directed. |
| 153 | S&F in repair building security light 45W, motion sensor street light, energy efficient should stays on as long as motion is detected. then dims to 20% if no movement is detected for 90 seconds. inbuilt microwave sensor. suitable for indoors/ outdoors with high efficient high power LED enclosed with toughened qlass and voltage rated 220V to 240V etc complete all as specified and directed |
| 154 | S&F in repair Street light bracket made out of 32/40 mm dia GI light grade tubing not less than .75 Mtr long bend to shape including pole clamps/fastners clips nails made out flat iron and nuts, bolts and washers etc complete all as specified and directed. |
| 155 | Supply and fix in replacement of LED lights fitting Four feet 1x 20 Watt LED 6500K, 220V,AC ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down all as specified and directed. |
| 156 | Supply and fix in repairs LED Tube lights fitting Four feet 1 x 20 Watt LED decorative up-Down Batten(Yellow uplight relax mode and white downlight work mode), 220V AC, decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 157 | Supply and fix in replacement of LED lights fitting Two feet 1x 10 Watt LED 6500 K, 220V,AC decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy, with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down all as specified and directed. |
| 158 | S&F Lamp Holder with LED bulb of capacity 7/9 watt complete all as specified and directed. |
| 159 | S&F for ceiling fans complete with blades,down rods remote, 2 years company warranty, 225CMM air delivery, curved blade design less than 32 W and accessories ,230 V,1200 mm sweep Min Air delivery 210CFM with service value 6.00 BEE .five star rated with Brush Less Direct Current motor (BLDC) complete all as specified and directed by Engr-in-Charge.Make : Havells/Cromption/Atumberg. |
| 160 | Supply and fixing 300 mm (12 inch) heavy-duty metal exhaust fan, 230 V AC, single phase, 50 Hz, 4-blade/3-blade, high-speed induction motor, metal body and blades, powder-coated/rust-resistant finish, minimum air delivery approximately 800–1,300 m³/hr, complete with protective guard, mounting frame, fasteners, electrical connection and testing, suitable for continuous ventilation duty. complete all as specified and directed by Engr-in-Charge. |
| 161 | S&F for electric water heater (Geyser) storage type 25 Itr capacity vertical mounting type, BEE 5 Star rated, 230 V, 50Hz, 2000 watt with suitable size fastner including provision and connecting up suitable size and length of SS braided pipe with adaptor for inlet an outlet water connection. Geyser of ABS/ metal body water proof and rust proof, water resistance & splash proof (IPX4). inner tank superior glass line enamel coating single weld line, heavy duty magnesium anode rod, corrosion resistance, PUF insulation for radient heat loss and energy saving. Temprature gauge and adjustable knob for temperature setting, auto cut off, capillary thermostat, multiple safety system for 1.00 protection against dry heating, over heating and over pressure, rated water pressure 8 bar, whirl flow technology, anti rust copper element, safety valve, NRV incl all fixing accessories all as specified and as directed:- |
| 162 | Supply and laying in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked of size 35 Sq.mm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed. |
| 163 | M&L Earthing complete with Galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick as earth buried directly in ground (earth pit not less than 2.25 Meter deep below ground level) with top edge of the earth plate not less than 1.5mtr below ground level using GI earth lead wire 4.0 mm dia as earth continuity conductor connected to earth plate by means of copper thimbles, nuts, bolts, washers including jointing of earth electrode and earth wire by means of welding, all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and pit cover made of MS sheet 2 mm thick duly fixed to angle iron frame with hinges of appropriate size by welding and having locking arrangement, adequate quantity of charcoal and salt around the earth plate, earth work in any type of soil , removing surplus excavated material all as required at site complete all as specified and directed. |
| 164 | Material and Labour for earth continuity conductor or main galvanised iron wire of size 4.00 mm burried in ground, fixed to wall, any other indicated situation for loop earthing and the like upto test point on necesarry insulators and fastning screws, rawl plugs complete all as specified and directed. Please Enable Macros to View BoQ information |
| 165 | Material and Labour for earth continuity conductor or main galvanised iron wire of size 4.00 mm burried in ground, fixed to wall, any other indicated situation for loop earthing and the like upto test point on necesarry insulators and fastning screws, rawl plugs complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 7 daysNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender