Tender For Providing Of Living Shelter Alongwith Toilet And Bathroom At Nagradar Under The Aor Of Age Br-Iii At Ge 874 Ews.
Tender Value
24.29 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
9 days left
EMD
48600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Living Shelter Alongwith Toilet And Bathroom At Nagradar Under The Aor Of Age Br-Iii At Ge 874 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for excavation over area n exc 1.50m deep and getting out in any type of soil complete all as specified and directed. |
| 2 | M & L for Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and directed. |
| 3 | Removing excavated soil material n/exc 50m and depositing where directed at a level n exc 1.5m above the starting point used the same in embankment of soil for retaining wall complete all as specified and directed. |
| 4 | M & L for Brickwork with subclass built in CM 1:4 ‘B’ bricks, straight or curved on plan exc 6m mean radius built in complete all as specified and directed. |
| 5 | M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces or other than fair face of brick work in CM 1 : 4 and finishing complete all as specified and directed. |
| 6 | M&L for applying two coats of cement base paint over a coat of primer including preparation of newly plaster surface of wall complete all as specified and directed. |
| 7 | M&L 50mm thick wall panel made 0.5mm thick hot dipped galvanised steel sheet on both side with 50 mm thick layer of rigid cfc free closed cell polyurethane foam with tongue and groove joint incl camp lock system for interlocking fixed on based channel 30 x65 x1.25 mm thick density of foam shall be 40 Kg /cum (+-2kg/cum) the panel shall be precoated as approved complete all as specified and directed. |
| 8 | M & L 40 mm thick for ceiling puff insulated panel made of .5 mm thick hot dipped galvanised sheet both side with 40 mm thick rigid polyurethane with tongue and groove joint for interlocking to fixed with inverted CRCA tee section 50x50x5 mm thick and L section of 50 x50x5 mm thick to roof trusses complete all as specified and directed. |
| 9 | M & L aluminium Puff insulated door shall be both side as well as fly proof main door shall be 50 mm thick to roof trusses complete all as specified and directed. |
| 10 | S & F Butt hinges, 100 mm long cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed. |
| 11 | S&F Mild steel sliding door bolts,250 mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 12 | S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed. |
| 13 | S & F Aluminium anodised,150 mm long barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 14 | M & L for mild steel work as in roof trusses (framed), Fe 410 -W (Gde- E- 250) quality- A trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 15 | M & L for mild steel work as in plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases. splices, angle brackets, cleats and other connections and Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Grade A complete all as specified and directed. |
| 16 | M & L for applying two coats of painting on new Steel surfaces of any description over 10 cm in width or girth over a coat of red oxide primer complete all as specified and directed. |
| 17 | M & L for Cement concrete (1 :4 :8), type D-2 using 40 mm graded stone aggregate as in foundations, filling and mass complete all as specified and directed. |
| 18 | M & L for providing, cement concrete in roof Type B1 1:2:4 20 mm graded aggregate kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, kerbs not provided for in Item , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 19 | M & L for RCC Nominal Mix 1:2:4 B1 (using 20 mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 20 | M & L for formwork to sides of concrete Fair finished surface of concrete flat foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 21 | M & L for formwork to sides and soffits of fair finished surface of concrete flat floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, complete all as specified and directed. |
| 22 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 23 | M & L for mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders1 cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 24 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 25 | M&L for moorum/red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 26 | M&L for hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. |
| 27 | M & L for Cement concrete D-2, 1:4:8 Type 40 mm graded aggregate, 75 mm thick as in sub base over rammed earth complete all as specified and directed. |
| 28 | M & L for Screed bed or bedding layer of mortar 15 mm in CM 1 :4 under floor tiles thick for laying floor finishes complete all as specified and directed. |
| 29 | M & L for Cement concrete B-1, 1:2:4 Type 20 mm graded aggregate, 25 mm thick as in sub base over rammed earth complete all as specified and directed. |
| 30 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) colour tiles area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 31 | M&L 75 mm thick PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate ) as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and directed. |
| 32 | S&F On site LLDPE septic tank for 10 user designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete all as specified and directed. |
| 33 | M&L for construction of Soakage well, of size 1.80 m dia at bottom and 3.00 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications. |
| 34 | M&L for cement concrete 1:3:6 type C-1 as in bed to drain pipes including 150 mm packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed. |
| 35 | M & L for Sail-glazed stoneware drain pipes 150 mm laid in trenches and jointed complete all as specified and directed. |
| 36 | S&F rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I complete all as specified and directed. |
| 37 | S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed. |
| 38 | S&F tubing galvanized iron medium grade with all fitting laid in concealed, trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm complete all as specified and directed. |
| 39 | S&F 20 mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 40 | M&L for Vitreous China squatting Pan \\"Orrisa Pattern\\" size 580 x 440mm white with integral foot rests including flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified and directed. |
| 41 | S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets (10 Ltr) capacity fixed in repair complete all as specified and directed. |
| 42 | S&F Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 43 | S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 44 | S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified and directed. |
| 45 | S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, complete all as specified and directed. |
| 46 | S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified and directed. |
| 47 | M&L for PVC (SWR) WC connector with lip ring 110mm complete all as specified and directed. |
| 48 | M&L for PVC (SWR) vent cowl for 75 mm dia complete all as specified and directed. |
| 49 | M & L for lagging on pipe of internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed. |
| 50 | S&F ball brass valve, with polyethylene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed. |
| 51 | S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 52 | S&F of Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 53 | S&F of 4 mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty in squares n exc .5 sqm each pane complete all as specified and directed. |
| 54 | S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 55 | M & L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed. |
| 56 | S&F for Brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 57 | Excavation in trenches n. exc 1.50m wide and n. exc 1.50m in depth and getting out any type of soil complete all as specified and directed. |
| 58 | Removing excavated material exc. 250mtr but n exc 500m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed. |
| 59 | Returning filling in including spreading levelling watering & well ramming in layers n. exc 25 cm thick complete all as specified and directed. |
| 60 | M&L for Brick work with Sub Class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in well /septic tank /soakage well complete all as specified and directed. |
| 61 | M & L for Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 62 | M&L for rendering 15mm thick plaster on other than fair faces of external face of wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 63 | M&L for applying two coats of synthetic enamel paint over one coat of pink primer on new plywood surfaces of any description, not otherwise described over 10cm width or girth complete all as specified and directed. |
| 64 | M&L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 65 | Material and labour for PCC 1:2:4 type B-1, 40mm thick levelling in floor complete all as specified and directed. |
| 66 | Supply and fix Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 thick screed mortar in CM 1:6 complete all as specified and directed. |
| 67 | S&F anodised aluminium powder coating door shutters aluminium section weighing 0.55 kg/ m including necessary joining cleats glazing clips, rubber neoprene packing. handles 2 Nos in each door, hinges anodised aluminium snap beading screws etc. complete all as specified and directed. |
| 68 | S&F anodised aluminium powder coating window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. |
| 69 | S&F powder coated For Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 70 | S&F sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed. |
| 71 | M & L for door closer aluminium extruded section hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 72 | S&F But hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed100mm complete all as specified and directed. |
| 73 | S&F Floor door stoper Aluminium 140 mm long complete all as specified and directed. |
| 74 | M&L For Plain Cement Concrete 1:2:4 (12.5) mm Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 75 | M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping/conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes made from 1.6 mm thick sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with 3mm thick plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement fixing in surface mount or concealed including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed. |
| 76 | All as per item No 75 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board. |
| 77 | All as per item No 75 herein before but wiring with 1.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board. |
| 78 | All as per item No 75 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board. |
| 79 | S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. |
| 80 | S&F Socket outlet 2 in 1, 3 pin, 5A, flush type complete all as specified and directed. |
| 81 | S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed. |
| 82 | S & F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. |
| 83 | S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 84 | Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 85 | M & L Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed. |
| 86 | Supply and fix LED Bulb 9 Watt complete all as specified and directed. |
| 87 | S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 88 | M & L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. |
| 89 | S&F of distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's, made out of sheet steel enclosure, recessed type, factory made powder coated 8 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 90 | S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series complete all as specified and directed. |
| 91 | S & F of MCB SPN, 240volt, 40 to 63 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 92 | M & L for wiring for circuit/submain wiring along with earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing caping of size 2x6 sq. mm + 1x4 sq. mm earth wire complete all as specified and directed. |
| 93 | Supply and installation and testing of Hot, Cold and normal Water Dispenser with refrigerator including all accessories 20 litre capacity, 230 volts, 50 hz, Refrigerant type R134a, complete all as specified and as directed. |
| 94 | Supply, Laying, jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection of sizes 16 sqmm 2.0 core complete all as specified and directed. |
| 95 | Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and directed. Note:-Punned thickness only shall be measured and paid. |
| 96 | Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and directed. |
| 97 | Supplying and fixing, light grade, Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps, bolts, nuts and washers complete all as specified and directed as for cable protection of sizes 40 mm bore complete all as specified and directed. Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule. |
| 98 | M & L for cutting, threading and joining of existing GI pipe and M & L for upto 80/50/40 mm dia and inserting suitable size tee for taking branch connection complete all as specified and directed. |
| 99 | Supply and laid in trenches pipe galvanized 20 mm dia medium grade complete including fitting such as bends, elbows, tees, short pieces, connectors, back nuts, caps, plugs and unions etc complete all as specified and directed. |
| 100 | M & L for lagging to pipes 20mm bore used in internal water supply or plumbing all round with 25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of density 144Kg/Cum conforming to IS-9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh and covered with 0.01mm aluminium foil, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender