Tender For Addition/Alteration To Existing Cupboards And Provn Of Kitchen Cabinet & Deficient Geysers In Certain Md Accn At 39 Wing Under Ge (Af) Udh Ur
Tender Value
43.43 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
6 days left
EMD
86600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udhampur → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Existing Cupboards And Provn Of Kitchen Cabinet & Deficient Geysers In Certain Md Accn At 39 Wing Under Ge (Af) Udh Ur
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Oct-2026 | CERTAIN CHANGES IN TENDER DOCUMENTS | BOQ | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkats or Frame (without taking off shutter from the frame) n.exc. 1.50 Sqm each, complete all as specified. |
| 2 | Supply and fixing factory made uPVC white colour Two track two panels sliding window upto 1.50 m height made of (big series) frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension including 12mm thick PVC sheet / 5-8mm thick sheet glass in panels. (Area of window upto 1.50 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware’s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 3 | Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 Sqm but n exc 4.00 Sqm each, complete all as specified. |
| 4 | Supply and fixing factory made uPVC white colour Two track two panels sliding glazed door made of (bigseries) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC, extruded glazing beads, uPVC extruded interlock and uPVC extruded line sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, 8-12mm thick PVC sheet / 5-8mm frosted glass in panels, zinc alloy (white powder coated) cresent lock with double key (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 5 | M&L for preparation of old surface of wall or ceiling in cupboard of any description including removal of all nails filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good and applying one coat of concrete paints complete all as specified and directed by Engr-in-Charge. |
| 6 | Dismantling boarding any description fixed in any position with nails / screws complete all as spfd. |
| 7 | S&F 18mm thick ply boards, grade 1 quality, interior grade, decorative type with decorative face veneer on one face fixed with screw to timber/steel frame work, including 1mm thick PVC moulding all around including edging, complete all as specified and as directed by Engr-in-charge. |
| 8 | M&L for .90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. |
| 9 | S&F Aluminium sheeting Alloy 31000 H4, STUCCO Embossed finish fixed with screw and Aluminium washer in kitchen cupboard back side and wall etc. complete all as directed. |
| 10 | S&F 15-18mm thick PVC sheet fixed with screw or adhesive in kitchen cupboard free foam rigid made out of PVC Resin (suspension grade) blended with suitable chemicals and additives. The sheets shall be made by extrusion process and foamed using organic blowing agents. The sheets will be coloured in wood grain or plain shades by blending suitable pigments with PVC resin. The sheets will have silky matt surface finish free from any blistering, colour blots, creasing, pin holes etc. complete all as directed. |
| 11 | S&F continuous (piano) hinge, mild steel, bright finish or electrogalvanised 30mm wide fixed with screw complete all as spfd. |
| 12 | S&F stainless steel anti rust hydraulic auto soft closing hinges fixed to wooden frames/shutters in cupboard all as specified and directed by Engr-in-charge |
| 13 | S&F stainless steel magnet catcher of size 55mmx30mmx15mm for wooden pannel, complete all as specified and as directed by Engr-in-charge. |
| 14 | S&F 100mm brass handles, cast type, polished bright complete all as specified and as directed by Engr-in-charge. |
| 15 | S&F profile handles over push-to-open system made of G-profile, C-profile, J-profile or aluminium profile 1.2-1.5mm thickness and 18-25mm in width, projection grip depth 20-25mm using SS or aluminium as required at site and in any colour as approved by Engr-in-Charge complete all as directed. |
| 16 | S&F Stainless steel multipurpose baskets as approved by Engr-in-Charge fixed in PVC/wooden drawer / partition for storing ration / utensil / dish etc of various type made of 4mm dia stainless steel rods, fixed in side partition etc, complete all as specified and directed by Engr-in-Charge.Male:- Godrej, Ozone, Overseas |
| 17 | S&F drawer side telescopic channel of standard size of standard length, inclusive of roller for moving drawer, mild steel bright finish or electrogalvanised width of flap 30mm (ISI Marked), complete all as specified and directed by Engr-in-Charge.Make:- Godrej, KIZONE, EBCO |
| 18 | M&L for preparation of old surface of wall of any description and applying one coats of oil bound distemper including filling putty or white cement to holes, cracks and uneven surfaces etc as required and making good approved by Engr-in-Charge complete all as spfd. |
| 19 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed. |
| 20 | M&L rendering 15mm thick in CM 1:6 on fair faces of brickwork or concrete surfaces finished even & smooth w/o using extra cement. |
| 21 | M&L for Preparation of Newly/previously old plastered surfaces of wall and applying 3mm thk Wall care putty (to be applied in two coats) complete all as specified and as directed |
| 22 | M&L for preparation of newly plastered surface and applying two coat of Oil Bound distemper over a coat of primer on walls complete all as specified and as directed. |
| 23 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed |
| 24 | M&L non-skid coloured ceramic tiles(Square/Rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:6 complete all as spfd. colour and design approved by Engr-in - Charge,Make:-Somany,Kajaria,Nitco |
| 25 | M&L for Glazed ceramic tiles in vertical surface 300x 450x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM-1:4 complete all as directed. |
| 26 | S&F stainless steel plate rack of any size any shape approved by Engr-in-Charge for plates and hook for hanging cups complete all as specified by Engr in Charge. Note : Weight will be measured by Engr-in-Charge in presence of JE and rep of Contractor and actual weight will be paid. |
| 27 | E/M PORTION |
| 28 | M&L Sub main wiring using approved colour coding as per IS with two single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade and one single core, PVC insulated, unsheathed FRLS multistranded copper conductor of size 2.5 sqmm (nominal area) 1100 volts grade cable as earth wire including suitable size of PVC conduit drawn through rigid Surface/concealed in PVC casing caping/ PVC conduit , heavey duty and connected to main board and making good disturbed surface after taking out old unserviceable sub main wiring and disposing from site complete all as specified and as directed. |
| 29 | Supply and fix in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of capacity 20 Amp including taking down all as specified and as directed. |
| 30 | Supply and fix electric water heater,storage type steel body with steelinner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Starrated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc. |
| 31 | Supply and fix electric Instanio of capacity 5.9/6 L Storage Water Heater(Geyser) steel body with steelinner tank and heating element upto 3 KW , BEE 5 Starrated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender