Tender For Addition/Alteration / Improvement To Dog Kennel At 4 Wg Under Ge Af Tech Area Agra
Tender Overview
Project Description
Tender For Addition/Alteration / Improvement To Dog Kennel At 4 Wg Under Ge Af Tech Area Agra
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 17-Nov-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 24-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick masonry Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, and making good complete all as specified and directed by Engr-in-charge. |
| 2 | Dismantiling of plain or corrugated steel sheeting any gauge, thickness of roof coverings complete all as specified and directed |
| 3 | Excavating in trenches in soft/loose soil n.exc 1.5M wide and n.exc 1.5M in depth for foundation, laying pipes, cables etc n.exc 10Sqm on plan and n.exc 1.5M in depth and getting out in fot/loose soil complete all as specified and as directed. |
| 4 | Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed. |
| 5 | M&L for Providing cement concrete type D-2, 1:4:8 ( using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed |
| 6 | M&L for brick work with sub class 'B' bricks (using old size bricks), straight or curved on plan exc 6M mean radius built in CM 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 8 | M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, and binding including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 9 | M&L RCC nominal mix 1:2:4 type B-1( using 20mm graded stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams, lintel beam; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed |
| 10 | Use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. flat concrete surface complete all as specified. |
| 11 | Removing surplus excavated material to a distance exc 50m but n exc 100m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with brocken stone or boulders complete all as specified and directed |
| 13 | M&L for 100 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate in flooring, levelling course etc complete all as specified and as directed. |
| 14 | M&L 50mm thick Cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) in flooring, finish the surface even and fair complete all as specified and directed.. |
| 15 | M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, path/hardstanding/subbase etc complete all as specified and directed by EIC. |
| 16 | M&L for 50 mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed. |
| 17 | M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60mm thickness, with minimum compressive strength of 35N/sqmm (M-35 grade) without correction factor for chamfering, made in rubber moulds with 0.50mm thick scratch proof lacquer coating on top surface, with white cement and pigment complete all as specified and directed. |
| 18 | M&L for PCC type B0 1:2:4 (using 12.5mm graded stone aggregates) as in copings and benching including necessary form work complete all as specified and as directed. |
| 19 | M&L for machine cut kota stone slab flooring 18 to 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete with and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 20 | M&L for machine cut kota stone slab 18 to 20mm thick as in dado, riser, steps and the likes laid over with and including rendering 15mm thick in CM 1:4 for bedding layer complete all as specified and as directed. |
| 21 | Excavating in post hole (or similar holes ) each not exceeding 0.5 Cum in soft/loose soil, including getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus loil to a distance not exceeding 50 m and making good disturbed surface complete all as specified & directed. |
| 22 | M&L for Cement concrete in foundations, filling and mass-concrete with type C-2 (1:3:6) mix using 40 mm graded stone aggregate etc complete all as specified and directed. |
| 23 | M&L for Providing cement concrete type B-2, 1:2:4 ( using 40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and directed. |
| 24 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work/concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 25 | M&L for rendering 15mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces finished the surface enen and smooth without using extra cement complete all as specified and directed |
| 26 | M&L for preparation of new plastered surfaces of Wall and applying two coats of weather proof exterior emulsion paint in normal pattern , over a coat of primer as per manufacturers instructions complete all as specified and as directed. |
| 27 | M & L preparation of new plastered surfaces and clearcolle for priming to distempering and applying two coats of distemper oil emulssion, white or tinted, complete all as specified. |
| 28 | M&L for Roof trusses (framed/unframed), trussed, purlins,rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel,gusset plate or flat sections) including distance pieces, cleats etc., drilling for fixing of steel sheets or other covering including welding and distance pieces work confirming to Fe- 410-W (Gde -E-250) quality A complete all as specified and as directed. |
| 29 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (150 GSM)as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 30 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (150 GSM) as in roof covering ridge etc, fixed with self tapping screws complete all as specified and directed. |
| 31 | S& F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in wind ties for roof including securing bolts etc including all necessary cutting and welding for similar work upto any ht of bldg complete all as specified and directed. |
| 32 | S&F frame work for seamless ceiling comprising of powder coated GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm center to center/ intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm center to center with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lip of 10.5 mm fixed to the intermediate channel at 457 mm center to center with suitable hook/fasteners and GI/aluminium suspenders not less than 4mm dia upto 1200mm length @ 1.00m C/C minimum. ceiling system is to be fixed in water level without any sag including ceiling cleats made out of GI flat iron 40x3mm size 60mm long and expansion hold fastner 12.5 mm dia 40mm long complete all as specified and directed. |
| 33 | S&F HPSC pre prime non asbestos fiber cement building board 4mm thick size 595x595mm with decorative finish fixed to GI powder coated snap grid frame work with screw in ceiling complete all as specified and directed. |
| 34 | M&L for 20 mm thick Telephonic Black Granite (of any size and shape) work (table rubbed and polished) in steps, jambs, pillars, wall,window cills, cooking platforms, oval shape WHB and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with skirting in any position complete all as specified and directed.. |
| 35 | S&F framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walksays railings , framework of water tanks, Display Board and similar work conforming to Fe-290 complete all as specified. |
| 36 | S & F Wire netting (size of mesh 20x20mm) of Galvanised iron wire 1.4mm dia fixed with FI of (40x5mmth) size and self tapping screws & washer to MS steel/frame according to mesh aperture upto 25 m of bldg ht etc complete all as specified and directed |
| 37 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) including making good of jambs with cement mortar 1:4 etc complete all as specified and as directed. |
| 38 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made Including Glazed shutter with 5.50 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per above mentioned drawing is deemed to be inclusive in the rate quoted for unit. |
| 39 | S&F stainless steel kitchen sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers wastepipe, cast iron cantilever brackets, connecting union of overall size 915x460mm and bowl size 410x330x160mm with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets complete all as specified and directed. |
| 40 | S&F pressed steel frames of 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 41 | S&F factory made 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified and as directed |
| 42 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed |
| 43 | S&F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed |
| 44 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specifed and directed. |
| 45 | M&L for mild steel fencing posts made with angle iron 65x65x6mm, flat iron 50x5mm and 12 mm round bar etc. For securing wire mesh including necessary cutting, welding, noching, riveting etc. and similar works conforming to E-165 complete all as specified and directed. |
| 46 | M&L for 12 mm dia mild steel bolt with lenth of bolt exc 5cm but n.exc 10 cm long with out washer , square or hexagonal head at one end and screwed at other end etc complete all as specified and directed |
| 47 | M&L Preparing surface of newly steel and iron work, of any description and girth, not otherwise described, and treated with tar or coal tar black paint for treating ends of posts, backs of chowkats, etc., area treated exc 0.10 sq. m. but n exc 0.5 sq. m each complete all as specified and directed |
| 48 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new sarface on steel over 10cm girth or width including preparation of surface complete all as specified and directed. |
| 49 | M&L for preparation for steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of surfaces nexc 10cm width or girth complete all as specified and directed |
| 50 | Supply only Chain link MS galvanised fencing , any size or type complete all as specified and directed |
| 51 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed |
| 52 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm below or above ground level complete all as specified and directed |
| 53 | M&L for PCC 1:3:6 Type C2 (40mm graded stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed. |
| 54 | M&L for PCC 1:2:4 Type B2 (20mm graded stone aggregates) as in surface channel and drains including neccesary formwork complete all as specified and as directed. |
| 55 | M&L for Extra for forming fair finished drain or channel 45cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 56 | M&L for rendering 15 mm thick on other than fair faces of brick or concrete surfaces finished fair and even (without using extra cement) in CM (1:4) complete all as specified and directed. |
| 57 | Removing surplus excavated material to a distance exc 250m but n. exc. 500M and depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and directed. |
| 58 | M&L in replacement for concealed sub main wiring drawing in and including PVC conduit not less than 20mm dia medium grade with PVC cable 6 Sqmm nominal area 2 single core PVC insulated unsheathed cable with stranded copper conductor incl 6 Sqmm size PVC cable stranded copper conducter as earth continuity wire and connected to earth dolly complete all as specified and directed.Note:- two runs of 6 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. |
| 59 | M&L in replacement for concealed sub main wiring drawing in and including PVC conduit not less than 20mm dia medium grade with PVC cable 4 Sqmm nominal area 2 single core PVC insulated unsheathed cable with stranded copper conductor incl 4 Sqmm size PVC cable stranded copper conducter as earth continuity wire and connected to earth dolly.Note:- two runs of 4 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. |
| 60 | M&L for Concealed Point wiring complete with 1.5 sqmm 1100 graded PVC FRLS (Multistrand) insulated unsheathed copper conductor single core multi strand flexible cable maintaining colour coding (Phase- Red/yellow/Blue, Neutral- Black), PVC conduit not less than 20mm dia concealed, including cutting chases in brick wall including CI/MS sunken box as required size on site with PVC white cover plate of suitable size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, and touching with three coats of existing colour of wall complete all as specified and directed.with all accessories including single core multistranded copper conductor 1.5 sqmm size cable (green colour) as earth continuity wire connected to common earth dolly to modular concealed box for housing switches, sockets etc for one light / fan/ bell point controlled by one switch one way complete all as specified and directed. |
| 61 | All as per srl item No 60 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead, complete all as specified and directed. |
| 62 | Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed. |
| 63 | Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed. |
| 64 | Supply & fixing for socket outlets 3 pin 15 amps flush type, universal 230 volts complete all as specified & directed. |
| 65 | Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge. |
| 66 | S&F Lamp holder insulated body with back plate for batten fittings complete all as specified & directed. |
| 67 | Supply and fixing in repair of 9 watt pin type LED bulb complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in replacement of decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded at heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified & directed. |
| 69 | Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) including down rod not less than 300 mm and connection with three core copper wire etc, complete all as specified & directed. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in ₹ |
| 70 | Supply and fixing ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) including down rod not less than 300 mm and connection with three core copper wire etc, complete all as specified & directed. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in ₹ |
| 71 | Old unserviciable AC sheets incl J or L hooks, ridge of any size and description |
| 72 | Old unserviciable chowkhat or frames with shutter exc 1.50 sqm and n.exc 4 sqm each with complete fitting |
| 73 | Old unserviciable Brick bats |
| 74 | Old unserviciable point wiring complete with conduit/batten etc including old material incl fitting fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting etc and making good disturbed surface of wall/ceiling etc |
| 75 | Old unserviciable submain wiring |
| 76 | Old unserviciable tue light fitting/ceiling light/Bulk head fitting |
| 77 | Old unserviciable Bldg security light |
| 78 | Old Unserviceable Service wire / UG cable any size Total amount of credit schedule 18400.0 Signature of contractor AGE (Contracts) For ACCEPTING OFFICER |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender