Tender For Special Repair To Bldg No 143 & 144 At 6 Ttr At Ponda C Under Ge Panaji (Goa)
Tender Value
48.75 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
13 days left
EMD
97000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No 143 & 144 At 6 Ttr At Ponda C Under Ge Panaji (Goa)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface or RCC slab |
| 2 | M & L for APP based polymeric membrane minimumn weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified |
| 3 | M & L for Rendering 10 mm avg thick on concrete surface over roof slabs in CM 1:4 finished even and fiar to receive roof treatment mixed with water proofing compound. |
| 4 | Taking down cement plaster of any description on brick or stone walls including racking ouit joint hacking for key, scrubbing down with water etc. |
| 5 | M&L for 15mm thick rendering in CM 1:6 on brick or concrete surfaces of wall , finished even and smooth without usng extra cement. |
| 6 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of new surface of wall with applying 3mm thick wall care putty complete all as specified and directed. |
| 7 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old decorated surfaces of wall with applying 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed. |
| 8 | Material and labour for rendering 15mm thick plaster in cement mortar 1:4 on external surfaces such as brick or concrete surfaces with using water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. (Water proofing compound shall be measured and paid for separately) |
| 9 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.complete all as specified and directed by Engr-in-charge. |
| 10 | M&L for preparation of old decorated plastered or unplastered surfaces,complete removal of existing treatment (washing, rubbing down and stopping of distempered and painted surfaces) with over external walls. Note : 1. Washing and Removal of existing treatment shall be carried out by mechanized means and by jet washing (90-150 bar) as required and directed by Engr-in-Charge |
| 11 | M&L for applying two or more coats on old surfaces with 100% premium acrylic emulsion paint having VOC content less than 50 gms/litre and UV resistance as per IS 15489:2004, alkalie and fungal resistance, dirt resistance, exterior paint of required shade with silicon additives @ 1.43L/10sqm over and including priming coat of exterior primer applied at 0.9L/10sqm complete all as specified and directed by Engr-in-Charge. Note:1. MOU between contractor and approved paint manufacturer shall be submitted by Contractor for Pre,during and Post work completion site inspections. |
| 12 | Material and labour for rendering 5mm thick plaster on concrete surfaces of ceiling with cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | Material and labour for applying three coats of white wash on new plastered surfaces of ceiling including preparation of surface complete all as specified and as directed. |
| 14 | M & L for applying two coat of oil emulsion distemper over a coat of chalk whiting as preparatoy to distemper including prepration of old surface of ceiling by complete removal of existing treatment complete all as specified and directed. |
| 15 | Supply only integral water proofing compound. |
| 16 | Demolition of stone slab and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed. |
| 17 | M&L for non skid coloured ceramic tile 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but no.exc 0.38 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 18 | All as per Item no 17 above but as in vertical surfaces |
| 19 | M&L for non skid coloured ceramic tile 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm but no.exc 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cemrnt to match |
| 20 | S&F glazed ceramic tiles 350x250x7mm / 450x350x7mmthick coloured on vertical surfaces such as dado skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 21 | M&L for machine cut kota stone slab for staircase 20-25mm thick, laid and jointed with grey cement slurry mixed with prigments tyo match the shade of the slab including rubbing and polishing complete as in floors. |
| 22 | All as per item No. 21 above but on vertical surfaces such as in skirting, dado and similar work |
| 23 | M&L for screed bed or bedding layer of cement mortar 1:6, 20mm thick for receive floor finish |
| 24 | M&L for PCC 1:3:6 type B-1 (20mm graded stone aggregate ) as in sub base under floor etc complete all as specified and directed. |
| 25 | M&L for back coat 10mm thick on brick or concrete surface in CM 1:4 finished even and fair to received glazed tiles |
| 26 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 including rounding of edges whereever reqd all as specified and directed by Engg-in -charge. |
| 27 | Supply and fix in repais vitreous china squatting pan 'Orissa' pattern, of size 580mmx440mm white with integral foot rest with and including 'P' or 'S' trap, connection to trap and to flushing pipe, trap set in and including provision of lime concrete bedding and taking out old WC and connections etc complete all as specified and as directed |
| 28 | M&L waste coupling 32 mm dia (PTMT) fixed in repairs for glazed ware sinks, basins etc half or full threaded with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed for 32 mm bore. |
| 29 | Supply and fixed repair CPVC 32 mm dia as waste pipe fitted to basin or sink all as specified and directed inclding taking down of old pipe. |
| 30 | S & F wash hand basin in repair, white flat back size 550 x 400mm including 32mm brass chromium plated waste fittings, brackets, pillar tap swan neck 15mm, PVC connection 15mm size with PTMT nuts of length 450mm including cutting for and pinning in ends of brackets for erecting stand etc.including PVC waste pipe etc complete all as specified and directed. |
| 31 | Taking down PVC (SWR) pipes 75/110 mm bore from walls. |
| 32 | M&L UPVC pipe, 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls |
| 33 | S&F UPVC (SWR) 110 mm bore '-ditto- as above. |
| 34 | S /F UPVC (SWR) bends 75mm bore any radius dismantling pieces or tapers. |
| 35 | All as item No.34 above but 110mm bore |
| 36 | S&F UPVC (SWR) branch piece, single,( single Y) equal or unequal with access door, for 110 mm bore dia pipes |
| 37 | S&F UPVC (SWR) branch piece,double,( double Y) equal or unequal with access door, for 75 mm bore dia pipes |
| 38 | UPVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement |
| 39 | S/F Nahani traps CL 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) |
| 40 | S&F PVC connection 15mm size with PTMT nuts of length 600mm. |
| 41 | S&F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and plstic cleats. |
| 42 | Supply and fix in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 43 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm |
| 44 | Taking up or down steel water tubing 15mm bore and connections, including cleaning for re-fixing or removal to store |
| 45 | All as in item No. 44 above, but 20mm bore pipe. |
| 46 | Supplying & laying CPVC water tubing outer dia 20mm, SDR-11 grade with all fittings and fixed complete to walls and ceiling or laid in floors. |
| 47 | All as in item No. 46 above, but 25mm bore pipe. |
| 48 | S&F Bib tap 15mm standard of PTMT any colour high pressure, long boby screwed for CPVC pipe and fixed in repair (Minimum weight 15mm-120gms) 15mm bore |
| 49 | S&F pillar tap 15mm of PTMT long body fancy type screwed down, screwed for CPVC pipes 15mm bore. Fixed in repair (15mm-120gm) |
| 50 | S&F in repairs Angle stop valve 15mm of PTMT any colour high pressure screwed for CPVC pipe and fixed in repair , (Minimum weight (15mm-90gms) |
| 51 | Supply and Fixing in repairs stop valves, cast copper alloy 15 mm bore Ditto, but fancy type, chromium plated with long shank and cup (concealed type)f complete fixed in complete all as specified and directed. |
| 52 | S&F in repairs PVC low/high level flushing cistern, 10 Ltrs capacity including float valve, chain, PVC flush pipe. |
| 53 | S/F Stainless steel shower roses 100mm size, with or without swivel joint including fixing to steel pipe, fixed in repair. |
| 54 | Supply and fixing stainless steel wall mounted modular kitchen plate rack for home size 750mm X 900mm X 250mm (1mm thick) included fixing screw complete all as specified. (Make: Blue star, Silvershine) |
| 55 | Taking down chowkat/frame with shutters n exc 1.5 Sqm (without taking off shutters from the frame) |
| 56 | Taking down chowkat with shutter(without taking off shutter from the frame) area exc 1.5sqm but n exc 4 sqm each. |
| 57 | M&L 2nd class hardwood for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints |
| 58 | M&L 35mm thick 2nd class H.W Glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze (glass) etc size of members of shutters as specified in SSR Part I section clause 8.24(a) supplied and fitted to chowkats. |
| 59 | S&F for Plain framed panelled shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated 35mm thick IInd class H.W rail and style. |
| 60 | S&F Hasp and Staple, safty type of Aluminium anodised 150mm |
| 61 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel |
| 62 | S&F extruded aluminium alloy, fabricaated type handle, 150mm long |
| 63 | S&F extruded aluminium alloy, fabricaated type handle, 100mm long |
| 64 | S & F 100mm butt hinges for door and windows midium weight,cold rolled mild steel and fixed |
| 65 | S & F Aluminium anodised barrel tower bolts150mm for door of extruded section and fixed |
| 66 | MS work as in bands, straps,clamps, hold fasts, hinges etc and similar small articles conforming to Fe 290, Gde E-165 |
| 67 | Material and Labour for cutting holes in brick walls in built in cement mortar or cement lime mortar and stone walls built in lime mortar exceeding Half brick but not exceeding one brick for inserting holdfasts and making good in dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed |
| 68 | S&F 300 mm long Aluminium alloy,anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. bright bolt not less than 12 mm dia with and including minimum of 6 bolts and nuts,four on bolt plate and two on staple plate complete all as specified. |
| 69 | S & F for Power coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 70 | S & F Power coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 71 | M&L for MS framed work as in grills, gratings and in similar work as portions of gates etc including pintle hinges, stops, sliding bolts etc |
| 72 | M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide on surfacess of any discription, over 10cm in width or girth. |
| 73 | S&F aluminum alloy wire mesh 0.45 mm nominal dia of wire and avge width of aperture 1.4mm cut to size and fixed to doors/window shutters and fixed with aluminium wire stapels complete. |
| 74 | S&F sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm each pane 5.5mm thick. |
| 75 | S&F Figured glass pin head type glazed with oil putty in squre exc 0.5 sqm in each pane 4mm thick |
| 76 | Supply and Fix in repair 25mm dia curtain rail,harrison rails, Stainless steel fancy type with stainless steel J type designer bracket with stainless steel holder fixing brackets roller etc. complete all as specified and directed |
| 77 | Treating and finishing the sunken portion of WC area not exceeding 1.2 Sqm each by providing 10mm thick rendering in cm 1:3 with and including water proofing compound and applying two coats of bitumen, providing necessary connection items suitable for WC, providing cement concrete and 1mm thick multiplus plastifelt over 20mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed trap stone aggregate complete all as directed. |
| 78 | Dismantling water tanks of 500 Ltr capacity |
| 79 | S&F 500 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 80 | Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced) for plinth protection & foot path. |
| 81 | M&L PCC 1:3:6 type C-2, 75mm thick as in plinth protection , surface finished fair and smooth without using extra cement complete all as specified and directed. |
| 82 | M&L Preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer. |
| 83 | Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed. |
| 84 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 85 | Taking down carefully copper/aluminium point wiring of light, fan, socket 5/15A or power point complete including fittings such as switches, bell push,electric bell,ceiling rose, pendant, regulator, socket, lamp holders, brackets, lamp fittings, etc including switch boards and making good disturbed surfaces of wall/ceiling etc so as to match with the existing wall/ceiling/floors etc completely all as directed by Engr-in-Charge. |
| 86 | M & L for point wiring with 1.5 sqmm (nominal cross sectional area) single core pvc insulated ,unsheathed FRLSH copper cable ,1100 Volt grade with multi stranded copper conductor drawn through and including rigid non metallic PVC conduit (medium grade) concealed in walls /ceiling with and including 1.5 sqmm single core PVC insulated multistranded ,unsheathed FRLSH copper conductor cable as continous earth continuity conductor (green in colour) with cast Iron/ Pressed Steel modulur terminal boxes of any size/module,concealed in walls and fixed by means of brass screw including modular white cover plates and cover frames any size /module and blanck plates, for mounting or housing switches ,socket outlets, fan regulators etc incl all other fixing accesories for one light/fan/exhaust fan/call bell point controlled by one 5/6 Amps switch complete including making good of wall surface by cementing/plastering complete all as specified and directed. |
| 87 | One light point controlled by one way switch. |
| 88 | One fan point controlled by one way switch and one regulator. |
| 89 | One Exhaust fan point controlled by one way switch. |
| 90 | One 3 pin switch socket point outlet 5A on independent board. |
| 91 | One 3 pin socket outlet point 5A on same board with other switch |
| 92 | One bell point controlled by one bell push. |
| 93 | One light point controlled by two 2-way switch. |
| 94 | All as per item No. 86 above but with cable size 2.5 sqmm for switch socket outlet point 15A on independent board including 2.5 sqmm PVC- FRLSH insulated copper earth continuity conductor to common earth. |
| 95 | S & F modular Switch 1 way 6 Amp, 1 module. |
| 96 | S & F modular Switch 1 way 16 Amp, 1 module. |
| 97 | S & F Modular Bell push 6A 1 module |
| 98 | S & F modular Socket 6A-2/3 pin combined 2 module. |
| 99 | S & F modular Socket 6A/16A -2/3 pin combined 2 module. |
| 100 | S & F modular fan regulator 120 W - 2 module. |
| 101 | S & F modular Switch 2 way 6 Amp, 1 module. |
| 102 | S & F surface ceiling rose made of bakelite of size 65mmx50mm with 3 terminals and PVC block. Ceiling rose will be fixed on PVC block complete all as specified and directed |
| 103 | Taking down carefully sub main wiring including aluminium conductor of any size / GI earth continuity conductor and making good disturbed surface all as directed. |
| 104 | Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 6 Sqmm in PVC conduit of 20/25 mm and one run of 6.00 Sqmm copper earth wire(green in colour) including all necessary connections and fixing arrangements complete all as Specified and Directed |
| 105 | Material and labour for concealed sub main wiring with FRLSH PVC insulated 1100 Volt Grade stranded copper conductor cable with of size 2X 2.5 Sqmm in PVC conduit of 20/25 mm and one run of 2.5 Sqmm copper earth wire including all necessary connections and fixing arrangements complete all as Specified and directed |
| 106 | Dismantling old Main Switches/DB with MCBs all as specified and directed including electric meter. |
| 107 | Fixing only, connecting and testing energy meters including all accessories retieved from item No 99 above |
| 108 | Supply and Fix MCCB 4 Pole .415 V. fixed type, 25 to 100 Amps with breaking capacity 18 KA connected with suitable lugs including testing and commissioning complete all as specified and as directed. |
| 109 | Supply and fix sheet metal enclosure double door, vertical type DB’s when MCCB’s to be used as incomer with Provision MCCB 100 Amp triple pole and neutral 4 ways IP 43,IK 09, 415 volts with 200amps rated bus bar fixed sunk to wall by cutting the brick/stone masonary etc & taking down of unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. Note:- The space left after inserting MCB should be properly filled with blanking plate |
| 110 | S & F for Sheet Metal Enclosure MCB DB SPN 8 Way, IP 43,IK 09, with 200 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in Wall by cutting the brick/stone masonary etc & taking down of unsv DB and making good of disturbed surface to match with existing colour of wall complete all as specified and directed. Note:- The space left after inserting MCB should be properly filled with blanking plate |
| 111 | Supply and fix MCB SP 240volts, 6Amp to 32Amp, 10KA capacity having C-series connected with suitable lugs including testing and commissioning complete all as specified and as directed. |
| 112 | All as per Item no. 104 above but SP 32 Amp |
| 113 | All as per Item no. 104 above but SP 40 to 63 AMP |
| 114 | Supply and fixing LED lights fitting 1x 20W, High lumen, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 115 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V A decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 116 | Supply and Fixing LED building security light fitting 30watt 230 V AC outdoor type with hight pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed. |
| 117 | S & F door bell, ding dong type, AC 230 Volts single pole |
| 118 | Supply and fixing of GI pipe Bracket of 40 mm dia light grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers all as specified and directed. |
| 119 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including making opening all as specified and directed. |
| 120 | Taking down ceiling fan of any type/size and make disconnecting electrical wire from ceiling rose, , removing substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning, assembling ceiling fan including painting with one coat of synthetic enamel paint of existing colour code including writing MES No with black synthetic enamel paint complete including testing hanging the ceiling fan as its own position, connection with point wiring complete all as directed by Engineer-in-Charge. |
| 121 | Material and labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm dia bar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 5 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 122 | Supply and laying galvanised steel water tubing of medium grade of dia 25mm with and including all fittings such as bends, elbows, tees, unions, niples, short pieces etc as required at site laid in trenches complete all as specified and directed.Note: Excavation and earth work shall be measured and paid seperately under relevant item of Sch 'A' |
| 123 | Supply and laying galvanised steel water tubing of medium grade of dia 15mm with and including all fittings such as bends, elbows, tees, unions, niples, short pieces etc as required at site laid in trenches complete all as specified and directed.Note: Excavation and earth work shall be measured and paid serperately under relevant item of Sch 'A' |
| 124 | Supply and fix gun metal gate valve 25mm dia heavy duty ISI marked with iron wheel head screwed both ends for iron pipe with all fittings complete includi all as specified and directed. |
| 125 | M&L for cutting of existing GI tubing of dia 40 mm to 50 mm for alteration or addition or insertion of new tees, branches etc including bends, tapers, tee pieces etc complete all as specified and directed by Engineer-in-charge. |
| 126 | Excavation trenches in Hard dense soil not exc. 1.5m wide and not exc.1.5m in depth all as directed by Engr-in-Charge and getting out hard/ dense soil for laying of cable, foundation etc.and all as per the direction of engineer in charge. |
| 127 | Returning and filling in excavated soil in trenches including spreading leveling watering and well ramming in layers not exceeding 25cm all as specified and directed by Engr-in-Charge . |
| 128 | Removing of excavated materials i.e surplus soil not exc 50M and depositing where directed at a level not. Exc. 1.5M above the starting point and all as per the direction of engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender