Tender For Shifting Of Transformer With Vcb And Lt Distribution Panel And Other Allied Electrical Structure At Coal Analysis Laboratory Basundhara Area
Tender Value
4.50 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
0 days left
EMD
5700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Shifting Of Transformer With Vcb And Lt Distribution Panel And Other Allied Electrical Structure At Coal Analysis Laboratory Basundhara Area
BOQ
| Sl. No. | Item Description |
| 1 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required Above 08.00 metre and upto 10.00 metre |
| 2 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required Above 10.00 metre and upto 12.00 metre |
| 3 | Supplying of two lengths of channel iron 75mmX40mmX6mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50mmX6mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. |
| 4 | Supplying and erection of a set of cross bracing FRL Same work for 11 KV over head line double pole structure having four members fabricated out of 50mm X 50mm X 6mm angle iron to form a rectangle of minimum size 1400 mm width X 2500 mm height, complete with 50 mm X 6 mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc (as per drawing) and painting with primer and finish paint as required |
| 5 | Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts,nuts, washers etc. as required. |
| 6 | Supplying and erection of 11KV pin insulator complete with large steel head G.I.pin, nuts, washers etc. as required. |
| 7 | Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/20 mm dia X 1.8 metres long stayrod, anchor plate of size 45cm X 45cm X 7.5mm thick, thimble, stay clamps, turn buckle (20mm X 600 mm), 7/4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6( 1cement :3 coarses and: 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required. |
| 8 | Erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc.as required. |
| 9 | Dismantling of pole /street light standard /strute mbedded in brick ballast foundation etc. as required. |
| 10 | Dismantling of over head line scomprising of copper /aluminium over head conductor, Cl. wire, cross arms, insulators etc. as required. |
| 11 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 12 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 13 | Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPEaluminium conductor cable of 11 KV grade as required 70 Sq mm |
| 14 | Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required: 70 Sq mm |
| 15 | Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 120 sq. mm |
| 16 | Supplying and making end termination with brass Double ompression gland and aluminium lugs for following size of PVC insulated and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 240 sq. mm (62 mm) |
| 17 | Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm |
| 18 | Supply of 250 mm X 200 mm H.T. danger notice plate |
| 19 | Supply and fixing Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm including hings, nut bolts and all materials as per requirement and instruction of EIC. |
| 20 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, Including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 21 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 23 | Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth 1:1.5:3 (1Cement: 1.5coarse sand (zone-Ill) derived from natural sources: 3graded stone aggregate20 mm nominal size derived from natural sources) |
| 24 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 25 | Steel reinforcement for R.C.C.work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 26 | Brick work with Fly Ash Brick (230 x 115 x 75 mm size) bricks of class designation 10 in super structure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 27 | Supply of Stone Aggregates 45 mm to 22.4 mm |
| 28 | Carriage of Stone aggregate 40mm nominal size and above Lead - 5, and spreading at site as per requirement and instruction of EIC. |
| 29 | 12 mm cement plaster of mix: 1:6(1 cement: 6 fine sand) |
| 30 | Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender