Tender For Proposed Construction Of Pickle Ball Court Under Mp Fund At Chennai Higher Secondary School, Bharathidasan Street, Thiruvanmiyur In Dn-180, Zone-13
Tender Value
13.70 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
14 days left
EMD
13700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Proposed Construction Of Pickle Ball Court Under Mp Fund At Chennai Higher Secondary School, Bharathidasan Street, Thiruvanmiyur In Dn-180, Zone-13
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering.bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. Upto 2.40m Footing Depth. (including Refilling charges) |
| 2 | Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers - Mixing by mechanical means |
| 3 | Supplying, fabricating and placing in position Ribbed Tor Steel/TMT remforcement grills of all variety like HYSD CTD/TMTand all grade like Fe 500.Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers. (Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) Upto plinth/Basement level |
| 4 | Providing and laying in position, Standardised Concrete Mix M-25 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/m3 and maximum water cement ratio of 0.50, including admixture (plasticiser/superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m)5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying. vibrating with mechanical vibrators, finishing, curing, etc, and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 5 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings. column pedestals, plinth beams, grade beams, staircase steps. Sill slabs etc. which require only nominal strutting using mild steel sheets of size 120cm x 30cm and 10 BG stiffened with welded mild steel angles of size -25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). FOUNDATION |
| 6 | Autoclaved Cellular Aerated Concrete (AAC) Blocks work using 60x20x20 mm size in cement mortar 1.5(1 cement and 5 parts of crushed stone sand) with self curing AAC joint mortar 2 to 3 mm thick including curing, etc..complete |
| 7 | Plastering the surface of walls with Cement Mortar 1:4 (Onc cement and Four plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. (Wall) |
| 8 | Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 |
| 9 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 10 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 11 | Providing, supplying and installation of modular interlocking Polypropylene (PP) sports flooring tiles, manufactured from high-quality UV-stabilized polypropylene material, suitable for outdoor sports courts, with anti-skid textured surface and interlocking system, laid over prepared level surface, including cutting, interlocking, alignment and finishing, complete as per approved pattern and manufacturer's specifications and as directed by the Engineer-in-Charge. |
| 12 | Supply, installation and fixing of a complete pickleball net system comprising 1 No. pickleball net with supporting posts, suitable for standard pickleball court use, including all necessary fittings, tensioning arrangements, hardware and accessories. All components shall be durable, weather-resistant and suitable for indoor/outdoor use. |
| 13 | Supply of complete pickleball equipment set comprising 4 Nos, pickleball rackets/paddles and 4 Nos, pickleballs, suitable for recreational and professional play, Rackets shall be durable, lightweight, with comfortable non-slip grips and suitable paddle surface, balls shall be high-quality, durable, and designed for pickleball play. Set to be supplied complete and ready for use, including all necessary accessories/packaging. |
| 14 | LED Sports Luminaire IP66, IK08, 5700K withsystem efficacy at least 100 Lumens/wan 200 W |
| 15 | Supply and laying of following sizes of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc.. The rate inclusive of all incidental charges, neceessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers-2 core 2.5 sq.mm armoured aluminium cable |
| 16 | Supplyand laying of 4 X 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 17 | Supplyand laying of 3.5 X 25 sq mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good |
| 18 | Supply and fixing of brass cable gland for 2 x 4 sq.mm. PVC LTUG armoured cable with earth connection |
| 19 | Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection |
| 20 | Supply and fixing of 4 way Honzontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door(metal) with 1 No 32 A 4P MCB as incoming and 12 Nos 6A to 32A SP MCB as outgoing on wall with Earth connection only. Lower End |
| 21 | Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal/acrylic door coverflush type/surface type fitted with busbars and neutral links with single three phase MCB outgoings and seperate 4 wayprovision for accomodating one No 4 pole incoming MCB/Isolator and another seperate 4 way provision for accomodatingone No 4 pole ELCB/RCD (totally 8 ways in one segment) (3x 4 ways in Each segment) and seperate provision for MCB / Isolators (totally 12 Nos) for sub incomers in 3 segments with lable holder ad provisio for taking up cable for size not lessthan 35 sq.mm with the following on wall with Earth connection only. |
| 22 | GST 18 % |
| 23 | LWF 1% |
| 24 | Quantity control charges 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender