Power Government Departments Closing in 22 days TDR #58142450

Tender For Supply Of Protection Switches˃

Issued by Government Departments · Yamunanagar, Haryana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
22 days left
EMD
50300
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Yamunanagar → Haryana
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Supply Of Protection Switches˃ , Belt Loading Monitor Blm; 5512 Ess Type: Blm5512/Es (Multirange Model), Enclosure : Cast Aluminum Ip 65 Grade, Supply: 110/230Vac 50 Hz. Speed Range: 5-5000 Rpm Selectable In 5-50,50-500 & 500-5000 Rpm Suitable For Your Requirement, Bypass Delay:1-30 Sec. Adjustable Start Up Delay. Indication :Led Indications Is Provided For Following.Green Led For Supply On Red Led For Relay, Red Led For Pulses O/P Contacts : 1No+1Nc For Zss And 1No+1Nc For Blm Rated For 5Amps At 230Vac., Sensor Probe Enclosure: Cast Al For Extension Stand With 100Mm Rubber Roller Or (Equivalent) , Digital Zero Speed Switch Non Contactor Type With Sensor Type:Ess/Mp/Ii, Volt:230 Vac,50Hz , Contact: 2 No +2 Nc, Rating: 10 Amps At 220V Ac., Speed Range : 10-5000Rpm(Adjustable) Enclosure: Cast Aluminium. Protection:Ip 55. Initial Bypass Timer: 1 To 60Sec.(Adjustable) Nuisance Trip Delay Timer :1 To 30 Sec. (Adjustable) Sensing Distance: 12-15Mm. Sensor Probe Size:M 30. Sensor Probe Dia:30 Mm. Protection: Ip 67. Enclosure :Ni Cr. Plated Brass Tube. Cable Core:3 Wire, 14/36 Pvc Flexible Cable. Cable Length:2 Meters Status Indication: Led Protection From :A) Transients.,B) Overload, C) Flase Pulse, D) Incorrect Polarity, E) Short Circuit, F) Volatage Spike. Sensor: 2 Sensor With Each Unit Or (Equivalent) , Sensor Probe For Electronic Speed Switch, , Minimum Sensing Distance:12-15 Mm, Sensor Dia: 30 Mm, Contat Pnp-No For Above Said Digital Zero Speed Switch At Sr. No. - 02 , Belt Sway Switch, Contact Rating 10 Ampere, 240 V Ac, 50N Hz, Combination - 2 No+2 Nc & Enclosure - Ip-65 Alongwith Bss Handle/Arm With Junction Box. , Sw-4038H22pull Cord Switch, Type: Sw-4038 Model: 1-0 Position(Unique Toggle Type Stayput Mechanism Provided Snap Action And Local Manual Reset) Enclosure: Die Cast Alminium With Terminal Box, Grade Of Protection : Ip-65, Contact Arrangement : 2No+2Nc, Contact Rating: 10 annual periodical maintenance Res.@ 240 Vac Cable Entry: 02 Nos., 19Mm(3/4) Bs Conduit Paint Shade: 176 Phirozi Blue As Per Is:5 Plug/Gland: Plastic Plug Terminal: Moulded Terminal Block , Proximity Switch Type: Sw4058 Construction Of A2 B50*80 Er , Type: Inductive Proximity Switch , Connections: Cable , Termination:4 Wire Ac With Relay Logic: Construction Of , Supply Votage: 110Vac, Enclosure Material: Nickle Plated Brass Tube, Enclosure Dimensions: Nf M50*80Mm, Sensing Distance Range: Extended Range, Sensing Distance: 25Mm+/-10% Ambient Temperature: Up To 55°C , Load Current:500Ma , Cable Size: 0.4 Sq. Mm , Cable Inner: Bbbw , Cable Sheath: Pvc Gray , Cable Length: 2 Mtr Front Cap: Pvc , Rear Cap: Pvc , Mountoing: Non Flush , Bc9 Limit Switch (Jlsla, Ip-67), 2 No+2Nc, 415V, 50 Hz, 1.5 A, Ac15/Dc13, Thermal Current (Ith) 10A@240V Ac/30V Dc, Impulse Voltage 1.5 Kv , Heavy Duty Limit Switch Equivalent To Product - Sw - 4042E22(Type Sw-404, Model: 1-0-1 Position(Bidirectional) Roller Dia. 50 Contact Combination 2 No + 2 Nc, Contact Rating : 10 A, 110V Ac Grade Of Protection : Ip-65 Paint Shade: 176 Phirozi Blue As Per Is:5 Cable Entry: 2 Nos.19Mm(3/4) Bs Conduit Plug/Gland:Plastic Plug. , Belt Tear Switch In Pair, Equivalent To Model No. 4320E22p, 2 No + 2 Nc, 10A, Ip 66

BOQ

Name of Work:-
Sl. No. Item Description
1BELT LOADING MONITOR BLM; 5512 ESSType: BLM5512/ES (MultiRange Model), Enclosure : Cast Aluminum IP 65 Grade, Supply: 110/230VAC 50 Hz.Speed Range: 5-5000 RPM Selectable in 5-50,50-500 & 500-5000 RPM Suitable for Your Requirement, Bypass Delay:1-30 Sec. Adjustable Start Up Delay.Indication :LED Indications Is Provided for Following.Green LED for Supply on Red LED for Relay, Red LED for Pulses O/P Contacts : 1NO+1NC for ZSS And 1NO+1NC For BLMRated for 5Amps at 230VAC., SENSOR PROBEEnclosure: Cast Al for Extension Stand With 100Mm Rubber Roller or (Equivalent)
2Digital Zero Speed switch non contactor type with sensor Type:ESS/MP/II, Volt:230 VAC,50HZ , Contact: 2 NO +2 NC, Rating: 10 AMPS at 220V AC., Speed Range : 10-5000RPM(Adjustable) Enclosure: Cast Aluminium. Protection:IP 55. Initial Bypass Timer: 1 To 60Sec.(Adjustable) Nuisance Trip Delay Timer :1 to 30 sec. (Adjustable) Sensing Distance: 12-15MM. Sensor Probe Size:M 30. Sensor Probe DIA:30 MM. Protection: IP 67. Enclosure :NI CR. PLATED Brass Tube. Cable Core:3 Wire, 14/36 PVC Flexible Cable. Cable length:2 Meters Status Indication: LED Protection from :A) Transients.,B) Overload, C) Flase Pulse, D) Incorrect Polarity, E) Short Circuit, F) Volatage Spike. Sensor: 2 sensor with each unit or (Equivalent)
3Sensor Probe for Electronic speed switch, , Minimum sensing distance:12-15 mm, Sensor Dia: 30 MM, Contat PNP-NO for above said Digital Zero Speed switch at sr. no. - 02
4Belt Sway Switch, Contact Rating 10 Ampere, 240 V AC, 50n Hz, Combination - 2 NO+2 NC & Enclosure - IP-65 alongwith BSS Handle/Arm with Junction Box.
5SW-4038H22Pull Cord switch, Type: SW-4038 Model: 1-0 position(Unique toggle type stayput mechanism provided snap action and local manual reset) Enclosure: Die cast Alminium with terminal box, Grade of Protection : IP-65, Contact Arrangement : 2NO+2NC, Contact Rating: 10 Amp Res.@ 240 VAC Cable Entry: 02 Nos., 19mm(3/4\\") BS conduit Paint shade: 176 Phirozi blue as per IS:5 Plug/Gland: Plastic plug Terminal: Moulded Terminal Block
6Proximity Switch Type: SW4058 CO A2 B50*80 ER , Type: Inductive proximity switch , Connections: Cable , Termination:4 wire AC with relay LOGIC: CO , SUPPLY VOTAGE: 110VAC, ENCLOSURE MATERIAL: Nickle plated brass tube, ENCLOSURE Dimensions: NF M50*80MM, SENSING DISTANCE RANGE: EXTENDED RANGE, SENSING DISTANCE: 25MM+/-10% AMBIENT TEMPERATURE: UP TO 55°C , LOAD CURRENT:500MA , Cable Size: 0.4 sq. mm , Cable Inner: BBBW , Cable Sheath: PVC Gray , CABLE LENGTH: 2 MTR Front CAP: PVC , Rear CAP: PVC , MOUNTOING: NON FLUSH
7BC9 Limit Switch (JLSLA, IP-67), 2 NO+2NC, 415V, 50 Hz, 1.5 A, AC15/DC13, Thermal current (Ith) 10A@240V AC/30V DC, Impulse voltage 1.5 KV
8Heavy duty limit switch equivalent to Product - SW - 4042E22(Type SW-404, Model: 1-0-1 Position(Bidirectional) roller dia. 50 Contact combination 2 NO + 2 NC, Contact rating : 10 A, 110V AC Grade of protection : IP-65 Paint shade: 176 PHIROZI BLUE as per IS:5 Cable Entry: 2 Nos.19mm(3/4\\") BS Conduit plug/gland:Plastic plug.
9Belt tear switch in pair, equivalent to model no. 4320E22P, 2 NO + 2 NC, 10A, IP 66 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58142450
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 17-11-2026
Authority
Authority Name Haryana Power Generation Corporation Limited
Work Description Tender for Supply Of Protection Switches˃ , Belt Loading Monitor Blm; 5512 Ess Type: Blm5512/Es (Multirange Model), Enclosure : Cast Aluminum Ip 65 Grade, Supply: 110/230Vac 50 Hz. Speed Range: 5-5000 Rpm Selectable In 5-50,50-500 & 500-5000 Rpm Suitable For Your Requirement, Bypass Delay:1-30 Sec. Adjustable Start Up Delay. Indication :Led Indications Is Provided For Following.Green Led For Supply On Red Led For Relay, Red Led For Pulses O/P Contacts : 1No+1Nc For Zss And 1No+1Nc For Blm Rated For 5Amps At 230Vac., Sensor Probe Enclosure: Cast Al For Extension Stand With 100Mm Rubber Roller Or (Equivalent) , Digital Zero Speed Switch Non Contactor Type With Sensor Type:Ess/Mp/Ii, Volt:230 Vac,50Hz , Contact: 2 No +2 Nc, Rating: 10 Amps At 220V Ac., Speed Range : 10-5000Rpm(Adjustable) Enclosure: Cast Aluminium. Protection:Ip 55. Initial Bypass Timer: 1 To 60Sec.(Adjustable) Nuisance Trip Delay Timer :1 To 30 Sec. (Adjustable) Sensing Distance: 12-15Mm. Sensor Probe Size:M 30. Sensor Probe Dia:30 Mm. Protection: Ip 67. Enclosure :Ni Cr. Plated Brass Tube. Cable Core:3 Wire, 14/36 Pvc Flexible Cable. Cable Length:2 Meters Status Indication: Led Protection From :A) Transients.,B) Overload, C) Flase Pulse, D) Incorrect Polarity, E) Short Circuit, F) Volatage Spike. Sensor: 2 Sensor With Each Unit Or (Equivalent) , Sensor Probe For Electronic Speed Switch, , Minimum Sensing Distance:12-15 Mm, Sensor Dia: 30 Mm, Contat Pnp-No For Above Said Digital Zero Speed Switch At Sr. No. - 02 , Belt Sway Switch, Contact Rating 10 Ampere, 240 V Ac, 50N Hz, Combination - 2 No+2 Nc & Enclosure - Ip-65 Alongwith Bss Handle/Arm With Junction Box. , Sw-4038H22pull Cord Switch, Type: Sw-4038 Model: 1-0 Position(Unique Toggle Type Stayput Mechanism Provided Snap Action And Local Manual Reset) Enclosure: Die Cast Alminium With Terminal Box, Grade Of Protection : Ip-65, Contact Arrangement : 2No+2Nc, Contact Rating: 10 annual periodical maintenance Res.@ 240 Vac Cable Entry: 02 Nos., 19Mm(3/4) Bs Conduit Paint Shade: 176 Phirozi Blue As Per Is:5 Plug/Gland: Plastic Plug Terminal: Moulded Terminal Block , Proximity Switch Type: Sw4058 Construction Of A2 B50*80 Er , Type: Inductive Proximity Switch , Connections: Cable , Termination:4 Wire Ac With Relay Logic: Construction Of , Supply Votage: 110Vac, Enclosure Material: Nickle Plated Brass Tube, Enclosure Dimensions: Nf M50*80Mm, Sensing Distance Range: Extended Range, Sensing Distance: 25Mm+/-10% Ambient Temperature: Up To 55°C , Load Current:500Ma , Cable Size: 0.4 Sq. Mm , Cable Inner: Bbbw , Cable Sheath: Pvc Gray , Cable Length: 2 Mtr Front Cap: Pvc , Rear Cap: Pvc , Mountoing: Non Flush , Bc9 Limit Switch (Jlsla, Ip-67), 2 No+2Nc, 415V, 50 Hz, 1.5 A, Ac15/Dc13, Thermal Current (Ith) 10A@240V Ac/30V Dc, Impulse Voltage 1.5 Kv , Heavy Duty Limit Switch Equivalent To Product - Sw - 4042E22(Type Sw-404, Model: 1-0-1 Position(Bidirectional) Roller Dia. 50 Contact Combination 2 No + 2 Nc, Contact Rating : 10 A, 110V Ac Grade Of Protection : Ip-65 Paint Shade: 176 Phirozi Blue As Per Is:5 Cable Entry: 2 Nos.19Mm(3/4) Bs Conduit Plug/Gland:Plastic Plug. , Belt Tear Switch In Pair, Equivalent To Model No. 4320E22p, 2 No + 2 Nc, 10A, Ip 66
Basic Detail
Tender No POM-14451 Supply of Protection switches
Bidding Type Tender
Location
City Yamunanagar
State Haryana
Key Dates
Publish Date 21 Oct 2026
Submission Date 17 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 1180
EMD 50300
Exemption Available
Document List
0fbc923d-1663-4288-881e-3df95c751ab5.html
BOQ_635580.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 21, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 22 days
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 25 days

Tender Documents

Download All (ZIP) ↓
html

0fbc923d-1663-4288-881e-3df95c751ab5.html

xls

BOQ_635580.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender