Tender For Improvement Of Lis Baleta Kalan And Baleta Khurd From Kunah Khad In Tehsil Nadaun Distt. Hamirpur Hp. (Sh:- Construction of Pump House & Attendent Quarter At Stage 1St.)
Tender Value
12.81 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
25639
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of Lis Baleta Kalan And Baleta Khurd From Kunah Khad In Tehsil Nadaun Distt. Hamirpur Hp. (Sh:- Construction of Pump House & Attendent Quarter At Stage 1St.)
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc. in all kinds of soil such as pick jumper work blasting soft or hard rock or by chiselling where blasting is prohibited soft/hard rock in all lifts stacking the excavated soil as directed by the Engineer-in-charge clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge in all leads and lifts |
| 2 | Providing and laying cement concrete 1:6:12(1 cement: 6sand: 12 graded stone aggregate 40mm nominal size and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts |
| 3 | Random rubble masonary/polygonal rubble masoanry (uncoused/brought to courses) with hard stone of approved qualtiy in Providing and fixing of including levelling up with cement concrete 1:6:12(1cement:6sand) 12 grded stone aggregate 40mm nominal size) plinth in Ivel in cement Mortar 1:6/1cement 6sand) in all leads and lifts |
| 4 | Brick work using common burnt clay building bricks in super structures above plinth level upto floor two level in cement mortar 1:6(1 cement:6sand) 2 class brick |
| 5 | Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards, lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge |
| 6 | Providing second class deodar wood paneled glazed or paneled and glazed shutters for doors, windows and clerestory windows including bright finished black enameled iron butt hinges with necessary screws with second class deodar wood 40mm thick in all leads and lifts. |
| 7 | Providing form work with steel plated 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring,shuttering, strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for insitu-reinforced concrete and plain. |
| 8 | Foundation, footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect |
| 9 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors etc. upto 200mm in thickness as per direction and to the entire satisfaction of the Engineer-in-charge. |
| 10 | Beams, cantilevers, girders & lintels, sides &soffits of beams, haunching, cantilevers, bressumers 1.00 mtrs ind epth in all heights from floor. |
| 11 | Providing and laying cement concrete 1:2:4 (1cement:2sand:4 graded stone aggregate 20mm nominal size)and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:- |
| 12 | Foundation, footing & bases of columns and the like mass concrete with in all leads and lifts complete in all respect. |
| 13 | Suspended floors, roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto all floor level as per direction and to the entire satisfaction of the Engineer-in-charge |
| 14 | Providing, Laying mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel in all leads and lifts. |
| 15 | Half brick masonary 2nd class common burnt clay building bricks in super structure in cement mortar 14(1 cement:4sand) in all leads and lifts as per direction of Engineer-in-charge. |
| 16 | Pointing on Stone/ brick with cement mortor 13 (1 Cement 3 Sand) with in all leads and lifts |
| 17 | Providing and laying of brick tiles over mumty rots growted with cement mortar 13 (1cement 3 sand) and finished need over CC slab (Sloped portion) |
| 18 | 6 mm cement plaster to ceiling in CM 13 (1Cement 3 Sand) complete in all leads and lifts |
| 19 | 15mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamfer and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) in all leads and lifts. |
| 20 | 20mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamfer and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6(1cement:6sand) in all leads and lifts. |
| 21 | Providing and fixing of M.S. Grills of required pattern in wood frames of windows etc with M.S. flats square or round bars with round headed bolts and nuts or by screws Plain grill. |
| 22 | Providing and Fixing wire gauge shutters using GMS wire guage of IS gauge designation 85 G with wire of dia 0.56 mm for doors, windows & clerestory windows including bright finished black enamelled iron hinges with necessary screws 2nd class deodar wood. |
| 23 | Boulder filling under floor/behind retaining walll in all leads and lifts as per the direction of Engineer in charge |
| 24 | Providing plinth protection 50mm thick in cement concrete 1:3:6(1cement: 3 sand:6graded stone aggregate 20mm nominal size) including finishing of the top surface of concrete smooth as directed by the Engineer-in-charge in all leads and lifts. |
| 25 | Constructing course rubble hammer dressede 'U' shape open surface drain with side wall 15x22 cm in cement mortar 1:6 (1cement:6sand) and inside plastering with cement plaster 1:3 (1cement:3sand) including earth work and laying 10 cmcement concrete in 1:5:10 (1cement:5sand: 10 graded stone aggregate) of 40mm nominal size and 7.5 cmcement concrete 1:2:4 (1 cement:2sand:4 graded stone aggregate 20mm nominal size) and finished withfloating coat to neat cement complete as per standard design. |
| 26 | Providing 40x3mm flat iron hold fast 40cm long including fixing to frame with 10mm dia meters bolts and nuts and wooden plug and embedding in cement concrete block 30x10x15cm 1:3:6(1 cement:3sand:6 graded stone aggregate 20mm nominal size). |
| 27 | Providing and fixing M.S.fan clamp (Type-I)of 16mm dia M.S. including bend upto shape with broken Jend in RCC. Slab door painting the exposed position of trap all as per standard design complete in all leads and lifts |
| 28 | White washing with lime on undecorated walls surface (two coats) to give an even shade including throughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts. Extra over item for white washing with lime on ceiling and or sloping roofs |
| 29 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and manufacture after thoroughly brushing the surface free from motar droppings and other foreign matter and also including prepairing the surface even and sand papered smooth complete in all respect |
| 30 | Finishing wall with water proofing cement paint of approved brand and manufacture & of required shade on decorated wall surfces (two coats) to given an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powered materials. |
| 31 | Providing and fixing anodized alminium sliding door bolts anodized transparent for type required and bright shade with necessary screw etc. complete. 250x16mm |
| 32 | Providing and fixing aluminium tower bolts (Barrel type) anodized transparent or dyed to rquired shade and colour with necessary screw etc. complete in all leads and lifts. 200x10mm |
| 33 | Providing and fixing Aluminium handles anodized transparent or dyed to required colour of shade with necessary screws etc. complete 100mm |
| 34 | Painting two coats(encluding priming coat) on new steel and other metal surface with enamel paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping ready mixed paint other than white. |
| 35 | Precast terrazzo tiles 20mm thick with marble chips of specified size) laid in floors, treads of steps and landings on a bad of 25mm average thickness of cement mortar 1:6 (1cement:6sand) jointed with neatcement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of following shades silver grey in all leads and lifts. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender