Tender For Repairing Of Dewatering Line With Allied Work At Kanti Nagar Bps
Tender Value
Ref. Documents
Estimated cost
Bid Submission
27 Oct 2026
0 days left
EMD
19600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Dewatering Line With Allied Work At Kanti Nagar Bps
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of old damaged delivery line etc. with the help of manual labour and tools & tackles as required. |
| 2 | Providing of Submersible Dewatering Pump Sets 5/3.7 KW with following specifications:- Discharge Connection (inches)-3\\", Rated Power (HP/kW)-5/3.7, power cable Waterproof/oil proof, rubber-insulated, neoprene-sheathed copper conductor flexible cable length upto starter, Hardware: 304 Stainless Steel, Rated Current at 460v (3 Ph.)-14 Ampere approx. three-phase (380-440V) 50 Hz Make:- Mody/BS/SU/Kirloskar. |
| 3 | Repairing of electrical operating system of dewatering pump by providing and Fixing fully automatic star delta starter for operation of submersible pump as above. |
| 4 | Supply of MS Pipe of all size. 26.1.28 |
| 5 | Supply of MS specials of all size. 26.1.29 |
| 6 | Providing and fixing bolts including nuts and washers complete. |
| 7 | Providing and Laying of copper conductor submersible cable 3CX6 Sqmm 100 Mtr roll. |
| 8 | SLUICE VALVE-CIDF WATER The Sluice valve 80 MM generally confirm to IS:14846 with length over flanges as per PD of IS:14846 corresponding to BS EN-558/ISO5752 Basic Series 3 in CI construction having metal seating (IS:318 Gr. LTB2). Body Door Dome CI to IS:210 Gr. Fg.260, body seat/door face are made of gun metal IS:318Gr. LTB2 spindle will be non-rising stainless steel AISI 410, spindle nut gun metal IS:318 Gr. LTB2, fasteners will be made of carbon steel and flanges are drilling as per IS:1538 table $ & 6. Suitable for PN1.0. Make IVC/Kirloskar/DJB Approved. |
| 9 | Supply of CIDF swing type 80MM, NRV generally confirm to IS 5312, part 1 & part 2. Valve shall be in graded Cl with metal to metal (IS:318 Gr. LTB2) having body, door in CI to IS, 210 Gr. FG. 260, Body ring and door ring of Gun metal IS:318 Gr. LTB2. Hinge pin of SS 410, Rivets of Carbon Steel, Flange are drilled as per IS 1538 Table 4, PN 1.0. Make:- IVC/Kirloskar/DJB Approved. |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint. |
| 11 | Safety arrangement like Air Face Mask, Helmet, Gum Boots, Hand Gloves, First Aid Box etc. arranged by the firm for safe working of men and machinery at site. All precautions are to be taken to save men and material. |
| 12 | Fabrication of MS pipe, MS specials/reducers/flanges etc. and fixing of all with the help of all labour like Fitter, Helper, Beldar, Electrician and material used like , neoprene rubber sheet, excavation as required T&P along with its all transportation loading unloading complete at site of work. |
| 13 | Testing and commissioning of delivery line on full pressure as per satisfaction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender