Tender For R & M Of T/Ship (Misc Civil Work (Masonry, Carpentary, Sanitary & Plumbing Work )In Bhel Township Haridwar )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
11 Nov 2026
1 days left
EMD
49905
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for R & M Of T/Ship (Misc Civil Work (Masonry, Carpentary, Sanitary & Plumbing Work )In Bhel Township Haridwar )
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Nov-2026 | enhance more participation | Date | 11-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked,to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 9.17.2 18 mm thick |
| 2 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.(S.I. 9.20.1) |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws (9.21.3) |
| 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size.Kiln seasoned selected class of sheesham wood (DSR-2012,S.I.9.27.1.1.3 ) |
| 5 | Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with :9.37.1 Decorative veneer facings of approved manufacture. |
| 6 | Renewing glass panes, with wooden fillets wherever necessary: :Float glass panes of thickness 4 mm Unit:Sqm |
| 7 | Renewing glass panes, with wooden fillets wherever necessary: Float glass panes of thickness 5.5 mm. (14.6.2) |
| 8 | Supplying at site :16.15.2 Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately). kg 64.55 |
| 9 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire. ( |
| 10 | Providing and fixing white vitreous china flat back half stall urinal of 580x380x350mm with white PVC automatic flushing cistern, Parryware/Hindware/Seabird/Orient (Coral) with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required:Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.( DSR-2012 S.I.No. : 17.5.1/288) |
| 11 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : : Kitchen sink without drain board :610x510 mm bowl depth 200 mm. Unit:Each |
| 12 | P/F white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm (DSR-2012 S.I. No. 17.13.2/289) |
| 13 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. Unit:Each |
| 14 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 17.19.1 10 litre (full flush) capacity-white each 1,474.10 |
| 15 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : :White solid plastic seat with lid Unit:Each |
| 16 | P/F white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm 340 x 10 x 265 mm sizes respectively (DSR-2012, S.I. No. 17.23/290). |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe |
| 18 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. : Flexible pipe :40 mm dia Unit:Each |
| 19 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : :Rectangular shape 453x357mm Unit:Each |
| 20 | Providing and fixing toilet paper holder : 17.34.1 C.P. brass each 250.95 |
| 21 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms (S.I.17.69.1) |
| 22 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms each 109.45 (S.I.17.69.2) |
| 23 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. :450MM long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than170gms. Unit:Each |
| 24 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour. Weighing not less than 300gms. Unit:Each |
| 25 | P/F G.I. pipe complete with GI fitting and clamps, including cutting and making good the walls etc. (internal work) 15 mm nominal bore. |
| 26 | P/F G.I. pipe complete with GI fitting and clamps, including cutting and making good the walls etc. (internal work) 20 mm nominal bore |
| 27 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work 18.12.1 15 mm dia nominal bore metre 142.25 |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.External work 18.12.2 20 mm dia nominal bore |
| 29 | Providing and fixing brass stop cock of approved quality : 18.16.1 15 mm nominal bore each 205.60 |
| 30 | Providing and fixing brass stop cock of approved quality :18.16.2 20 mm nominal bore each 266.65 |
| 31 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : :150 mm diameter Unit:No.( S.l.No. : 18.22.2) Page No.: 316 |
| 32 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 18.49.1 15 mm nominal bore each 397.50 |
| 33 | Providing and fixing C.P. brass long body bib cock of approved qualityconforming to IS standards and weighing not less than 690 gms.18.51.1 15 mm nominal bore each 430.60 |
| 34 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore each 426.55 |
| 35 | Providing and fixing PTMT bib cock of approved quality and colour. :15 mm nominal bore, 122mm long. Weighing not less than 99 gms. Unit:No |
| 36 | Providing and fixing PTMT pillar cock of approved quality and colour . :15mm nominal bore, 107mm long. Weighing not less than 110 gms. Unit:No. |
| 37 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length. (S.I.No.18.74.2) |
| 38 | Supplying and stacking of well-seasoned deodar wood planks in different sizes for repairing door, windows, ventilators shutters as approved and as direction of Engineer-In -charge. |
| 39 | Supplying and stacking of well-seasoned Sal wood frames in different sizes for repairing door, windows, ventilators chaukhats as approved and as direction of Engineer-In -charge. |
| 40 | Supplying and stacking of (coarse/fine) Sand in Civil Maintenance store for resolution of Civil Masonry Complaints as approved and as direction of Engineer-In -charge. |
| 41 | Supplying and stacking of aggregates of required sizes in Civil Maintenance store for resolution of Civil Masonry Complaints as approved and as direction of Engineer-In -charge. |
| 42 | Supplying and stacking of common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in Civil Maintenance store for resolution of Civil Masonry Complaints as approved and as direction of Engineer-In -charge. |
| 43 | Supplying and stacking of Portland Cement of approved brand (UltraTech, Ambuja Cement, ACC, Shree Cement, JK Cement, JSW cement) in Civil Maintenance store for resolution of Civil Masonry Complaints as approved and as direction of Engineer-In -charge.( 1 UNIT= 1 BAG =50 KG) |
| 44 | Supplying and stacking of TMT/MS reinforcement bars (round/square) of approved make and grade including loading, transportation, unloading, stacking, and all incidental charges, complete as directed by the Engineer-in-Charge. |
| 45 | Supplying and stacking of Water proofing Paint of approved brand (Asian paint, Dr. Fixit, Sika, Berger paint, Birla Opus) in Civil Maintenance store for resolution of Civil Masonry Complaints as approved and as direction of Engineer-In -charge. |
| 46 | Providing, fabricating, supplying, and fixing/replacing existing worn-out door, window, and ventilator chaukhats with new chaukhats fabricated from M.S. pipe/M.S. sheet/ M.S. angle, suitable for single-leaf or double-leaf shutters, including cutting, welding, grinding, proper alignment, anchoring, necessary fittings, application of one coat of steel primer and two coats of synthetic enamel paint, and all materials, labour, tools, transportation, and finishing required to complete the work in all respects, as directed by the Engineer-in-Charge. |
| 47 | Supplying and fixing 2 mm thick homogeneous polyvinyl cholorodesheet/tole in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufacturer like dunlop S-758, FevicolSR-998 or equivalant including rolling with light wooden roller weighing about 5 kg . All T & P required to complete the work as per direction of Engineer in charge in approved colour and shade. |
| 48 | Providing & fixing PVC P-trap (self cleaning design) of 100mm inlet and 100mm outlet as per direction of Engineer in charge. |
| 49 | Texture painting with high gloss on wood work in required color/wooden shade texture: Preparation of the surface of door / window / frame with emery paper to systematically remove existing old enamel paint, repairing the door / window / frame’s surface with approved putty as per direction of Engineer in charge, preparing the surface with a base coat of enamel paint as per required shade, after the paint surface dries, rubbing it again with emery paper, making fibers from the surface with spirit, red grain, yellow paper and cotton, after drying, polishing the surface with touch wood. (All Materials, T&Ps required to complete the work is within the scope of contractor.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 11, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender