Tender For Construction Of Latrine Bathroom Point At Sadiq Abad Near Womens College Anantnag[Adv. Cost ₹ 4.00 Lacs (₹ 3.39 Lacs Exclusive Of Gst + Gst@18% ₹ 0.61Lacs)]
Tender Value
Ref. Documents
Estimated cost
Bid Submission
28 Oct 2026
5 days left
EMD
8000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Anantnag → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Latrine Bathroom Point At Sadiq Abad Near Womens College Anantnag[Adv. Cost ₹ 4.00 Lacs (₹ 3.39 Lacs Exclusive Of Gst + Gst@18% ₹ 0.61Lacs)]
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mech means in foundation trenches, drains, pipes and cables etc.(not exceeding 1.5 Mtr. In width or 10 SqMts on plan) including dressing of sides and ramming of bottoms, lift upt 1.5 Mtr. Including getting out excavated soil and disposal of surplus soil as directed and lead up to 100 Mtrs. |
| 2 | Providing and laying hand packed stone soling in foundation ,under floors etc. incl ramming, watering and consolidating complete ,cost and carriages of all materials involved upto site of work complete. |
| 3 | Providing and laying in position cement concrete of specified grade M-7.5 excluding the cost of centering and shuttering - All work at all levels in : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including cost and carriage of all materials involved upto site of work complete. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all carriages complete job |
| 5 | Brick masonry with FPS bricks of class designation 75 in super structure upto floor V level in cement mortar 1:6 (1 cement:6cement coarse sand) complete as per the directions of Consultant inculding cost & carriage of all materials involved upto site of work complete. |
| 6 | Providing and laying in position reinforced cement concrete of specified grade 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size crushed aggregate) for reinforced cement concrete works excluding the cost of centering, shuttering, and reinforcement. All work at upto Plinth levels. M-20 all carriages included |
| 7 | Reinforcement for R.C.C work including straightening, cutting, bending, placing in position & binding with binding wire all complete, Hot Rolled Deformed Bars (All work at all levels complete) |
| 8 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 9 | Providing & fixing Precoated galvalume profile sheets 0.50 mm TCT having a crest height of 28-32mm at 195mm pitch and effective width of 975-1000mm and length to suit site requirement to the purlins using self drilling and self tapping fasteners of reputed make with purlin sheet using self drilling and self tapping fasteners & Fixing flashings, valleys and ridges of colour coated galvalume plain sheet using self drilling and self tapping fasteners of reputed make complete and as directed. The contractor shall give a minimum of 10 years guarantee for sheets against deterioration, disintegrations loss of luster, variation in colour, etc. and leakages across laps, fasteners etc. All types of steel sheets shall be load tested to satisfy 1.10 times the design wind load and coating thickness to the satisfaction of the Engineer-in-Charge. Fasteners shall also be load tested. The Contractor is to submit design and shop drawings for approval on the sheet profile, design and fabrication details before installation (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 10 | Providing form work including Centering ,shuttering , strutting, propping etc.using ply wood sheeting with water proofing ply board (12 mm min.thickness) and removal of the same for (All work at all levels complete.) - (a) Foundations. |
| 11 | Providing form work including Centering ,shuttering , strutting, propping etc.using ply wood sheeting with water proofing ply board (12 mm min.thickness) and removal of the same for (All work at all levels complete.) - (b) Suspended floors / slab. |
| 12 | 12mm cement plaster in 1:4 (1 cement : 4 fine sand) (including cost of all material, leads, lifts and carriages etc upto site of work complete). |
| 13 | Providing wood work in frames of doors windows, clerestory windows and other frames wrought framed and fixed in position with hold fasts lugs or with dash fasteners of required dia and length (hold fasts lugs or dash fasteners shall be paid for separately (imported Kail wood) including all carriages complete. |
| 14 | Providing and fixing 35mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (imported kail wood). |
| 15 | Providing/Fixing of door window standard wire fittings |
| 16 | T. Bolts, 150 mm |
| 17 | Handles, 125 mm |
| 18 | L-drops (Link), 200 mm |
| 19 | Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm with wire of dia .0.63 mm for doors, windows and clerestory windows including I.S.I. marked black enameled M.S. butt hinges with necessary screws. Second Class kail wood |
| 20 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. |
| 21 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600 mm |
| 22 | P/F of 4mm thick glass panes with all fittings complete job |
| 23 | Sanitary fixtures and fittings |
| 24 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 25 | Providing and fixing wash basin with pedestal White Vitreous China Wash basin size 550x400 mm with all necessary fittings like waste pipe, hooks etc (sample to be got approved by Incharge engineer at site) all complete |
| 26 | Providing and fixing 15mm dia C.P. brass bib cocks with wall flange. |
| 27 | Providing and fixing 15mm dia braided connection pipe. |
| 28 | Angle valve approved Make |
| 29 | Providing and fixing of Basin Mixer on standard quality. |
| 30 | Providing and fixing of CP brass Health faucet with 8mm dia 1 mtr. Long PVC tube and wall hook fixed to wall with rawl plugs and CP brass screws complete.Make Jaquar |
| 31 | Providing in position storage type Hot Water electrical horizontal heaters with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts) Capacity - 50 Litre |
| 32 | Soil ,waste, vent and rainwater pipes |
| 33 | Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B.Sink, floor drains etc. |
| 34 | uPVC pipe, 40 mm outer dia |
| 35 | uPVC pipe, 63 mm outer dia |
| 36 | Providing and fixing uPVC S.W.R. Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports. Make: Pipe & fittings: VECTUS/Kisan/AKG |
| 37 | uPVC SWR pipe, 110 mm outer dia |
| 38 | uPVC SWR pipe, 150 mm outer dia |
| 39 | Water supply |
| 40 | Providing and fixing 3 layer PP-R(Poly propylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain and brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (Make : Vectus, PRINCE). (Contractor should make nipples from same class of pipe; readymade nipples will not be allowed.) |
| 41 | PN-16 pipe, 20 mm OD |
| 42 | PN-16 pipe, 25 mm OD |
| 43 | PN-16 pipe, 32 mm OD |
| 44 | Providing and placing on terrace (at all floor levels) 4 Layer polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (rate per litre of capacity) |
| 45 | Providing and Fixing of Tanky Nipple G.I 25mm |
| 46 | Providing and Fixing of Ball Valve 25mm |
| 47 | Union 25mm |
| 48 | Elbow 25mm |
| 49 | Tee 25mm |
| 50 | Provision for Electric fittings complete job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender