Tender For Maintenance And Repair Works Of Dhakrani Power House Colony At Dhakrani, Dehradun
Tender Value
27.76 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
2 days left
EMD
69500
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance And Repair Works Of Dhakrani Power House Colony At Dhakrani, Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Demolishing brick work, manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 3 | Dismantling old plaster or skirting/Dado raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer in charge. 1:3:6 or richer mix Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 5 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm |
| 7 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 9 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below.Including supply of all material, labour, T&P etc required for proper completion of the work |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:3:6 (1 Cement :3 coarse sand : 6 graded stone aggregate 40 mm nominal size). Including supply of all material, labour, T&P etc required for proper completion of the work |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - in kerbs, steps and the like at or near ground level. 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size)Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 14 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand). Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 16 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in in Cement mortar 1:6 (1 cement : 6 coarse sand). Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 17 | Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in Cement mortar 1:4 (1 cement :4 coarse sand)Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 18 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with Cement mortar 1:6 (1 cement : 6 coarse sand) Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. Sal wood.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 20 | Providing and fixing ISI marked oxidised M.S.sliding door bolts with nuts and screws etc 300x16mm .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 21 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.150x10 mm .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 22 | Providing and fixing ISI marked oxidised M.S.handles conforming to IS:4992 with necessary screws etc. 100 mm . Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 23 | Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. 100x58x1.90 mm . Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 24 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished 50x37x1.50 mmIncluding supply of all material, labour, T&P etc required for proper completion of the work. |
| 25 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges 150mmIncluding supply of all material, labour, T&P etc required for proper completion of the work. |
| 26 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised. Twin rubber stopper. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 27 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory. With 2nd class teak wood beading 62X19 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 28 | Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory. With 12 mm mild steel U beading.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 29 | Renewing glass panes, with putty and nails wherever necessary Float glass panes of thickness 4 mm (weight not less than 10kg/sqm) .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 30 | Refixing old glass panes with putty and nails.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 31 | Renewal of old putty of glass panes(length) Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 32 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. . Work Using Mild Steel and Medium /Tensile Steel Bars. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 33 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 34 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 35 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire 9.38 kg per 100 m (minimum) between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used with G.I. barbed wire. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 36 | Providing and fixing G.I. chain link fabric fencing 25x25mm made of G.I. wire of dia 3 mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4mm.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 37 | Providing and fixing curtain rods of 1.25 mm thick 25 mm dia.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 38 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Weldge expansion type Fastener with threaded dia 6 mm |
| 39 | 12 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand). Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 40 | 12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand) . Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 41 | Providing and fixing glass strips in joints of metre terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 42 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 43 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 45 | Wall painting with acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour Two coats or more coats |
| 46 | Wall painting with acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour One coats or more coats |
| 47 | Lettering with black Japan paint of approved brand and manufacture.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 48 | Re-lettering with black Japan paint of approved brand and manufacture. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 49 | Hire charges of welding machine with single phase with welder, helper and electrodes etc. for repair and welding of gates, door, window etc. for 8 hrs. in a day complete with all material labour, T&P etc. required for proper completion of work.(As per previous approved Argreement/copy attached) |
| 50 | Attending minor type of repair for full day by engaging and supplying one suitable carpenter/ /Mason /Plumber for carrying simple type of repairing of all work including all T&P etc. complete but excluding cost of material.(As per approved analysis) |
| 51 | Supply Beldar/mazdoor/mali(unskilled) for full day as per requirement for attending miscellaneous works as per direction of the enginner in charge for proper completion of the work in emergency withT&P as required. |
| 52 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 53 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I)non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 54 | Providing and fixing brass bib cock of approved quality, 15 mm nominal bore.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 55 | Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 90 mm long, weighing not less than 93grams.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 56 | Providing and fixing PTMT pillar cock of approved quality.15mm nominal bore,107 mm long, weighing not less than 110 gmsand colour .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 57 | Providing and fixing PTMT stop cock of approved quality and colour. , 15 mm nominal bore 86 mm long, weighing not less than 88 gms. |
| 58 | Providing and fixing PTMT stop cock of approved quality and colou, 20 mm nominal bore, 89 mm long, weighing not less than 88 gms |
| 59 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 15mm dia nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 60 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall20mm dia nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 61 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall25mm dia nominal bore.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 62 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Iinternal work - Exposed on wall 32 mm dia. nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 63 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 15 mm dia. nominal bore ..Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 64 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work)20 mm dia. nominal bore.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 65 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 25 mm dia. nominal bore..Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 66 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 50 mm dia. nominal bore. .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 67 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. (external work) 80 mm dia. nominal bore. .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 68 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 25 mm nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 69 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore . Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 70 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 65 mm nominal bore .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 71 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)80 mm nominal bore .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 72 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 73 | Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 15 mm nominal bore. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 74 | Providing and fixing uplasticised PVC connection pipe with brass unions, 30 cm length. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 75 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.Semi rigid 32mmdia pipe.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 76 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 White Vitreous China Flat back wash basin size size 630x450 mm each with single 15 mm C.P. brass pillar tap. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 77 | Providing and fixing white vitreous china water closet squatting pan (Indian type). Orissa pattern W.C. pan of size 580x440 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 78 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan.(Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 79 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device, 10 litre capacity-coloured. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 80 | Providing and fixing 100 mm sand cast Iron grating for gully trap.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 81 | Providing and fixing trap of self cleansing design with screwed down or hinged. Sand Cast Iron S&S as per IS- 1729 100 mm inlet and 75 mm outlet. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 82 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden. 450mm long towel rail with total length of 495mm, 78mm Nos. wide and effective height of 88mm, weighing not less than 170gms. Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 83 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 84 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 75 mm diameter.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 85 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories 75 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 86 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes 110 mm diameter.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 87 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories 110 mm.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 88 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tankIncluding supply of all material, labour, T&P etc required for proper completion of the work. |
| 89 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1stquality conforming to IS :15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 90 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 91 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 92 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 93 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm) on existing cement paint surface |
| 94 | Engaging & operation of one tractor along with one driver & trolley having hydraulic jack arrangement . including cost of fuel lubricants and repair maintenance ete. complete in all respect as per direction of I/C. including Supply of all material, T&P etc required for proper completion of the work. |
| 95 | Providing and fixing soil, waste and vent pipes: 100mm dia.Sand cast iron S&S pipe as per IS: 1729.(As perIncluding supply of all material, labour, T&P etc required for proper completion of the work. |
| 96 | Providing and fixing soil, waste and vent pipes: 75mm dia.Sand cast iron S&S pipe as per IS: 1729.(As per Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 97 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983. Kitchen sink without drain board, 470x420 mm bowl depth 178 mm.(As per Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 98 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 99 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick including supply of all material labour T&P etc, also including treatment to expansion/construction joints.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 100 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed.1 Earth work in excavation in all kinds of soils. (Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 101 | Providing and fixing aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately).Anodised aluminium (anodised transparent or dyed to required shade according kilogram to IS: 1868, Minimum anodic coating of grade AC 15) Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 102 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item .With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 103 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin-charge.With stainless steel cover plate minimum 1.25 mm thickness .Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 104 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. Including Supply of all material labour, T&P etc required for proper completion of the work |
| 105 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick Anodized (AC 15 ) aluminium tubular handle bar Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 106 | Providing and fixing 100mm brass locks mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete |
| 107 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 108 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer(having brand logo with IS,ISI:3564 embossed with body,door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 109 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately |
| 110 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts, fasteners etc.). |
| 111 | Engaging & operation of one no.Hydraulic excavator cum loader machine (preferably JCB)having capacity 75 BHP with one operator an one helper, including cost of fule lubricants and repair maintenance etc. for removal of slip/landslide/excavation in dry and wet condition, complete in all respect as per direction of I/C. |
| 112 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 113 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 114 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
| 115 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 116 | Providingand Laying of Interlocking Concrete BlockPavementsof M-40 Grade having thickness 80 mm as per drawings and Technical Specification Clause 1504.Including supply of all material, labour, T&P etc required for proper completion of the work. |
| 117 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete Marble tiles (polished) Raj Nagar |
| 118 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 119 | Centering and shuttering including strutting, propping etc. and removal of Suspended floors, roofs, landings, balconies and access platform |
| 120 | Centering and shuttering including strutting, propping etc. and removal of Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 121 | Centering and shuttering including strutting, propping etc. and removal of Columns, Pillars, Piers, Abutments, Posts and Struts |
| 122 | Providing and fixing of 40 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts, G.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1 cement : 3 coarse sand). 1.00 mm thick with zinc coating not less than 275 gm/m² |
| 123 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 thick with zinc coating not less than 275 gm/m² |
| 124 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required |
| 125 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on walls PN - 16 Pipe, 20mm OD (SDR-7.4) |
| 126 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on wallsPN - 16 Pipe, 25mm OD (SDR-7.4) |
| 127 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes testing of joints complete as per direction of Engineer-in-Charge. Internal Exposed on wallsPN - 10 Pipe, 50mm OD (SDR-11) |
| 128 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work PN - 16 Pipe, 20mm OD (SDR-7.4) |
| 129 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work PN - 16 Pipe, 25mm OD (SDR-7.4) |
| 130 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work PN - 10 Pipe, 50 mm OD (SDR-11) |
| 131 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work PN - 10 Pipe, 75 mm OD (SDR-11) |
| 132 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS 15801, UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work PN - 10 Pipe, 110mm OD (SDR-11) |
| 133 | Providing and fixing Pressmatic Pillar cock auto closing system Jaguar make model PRS-CHR-031 or equivalent including T&P etc require for proper completion of work. |
| 134 | Providing and fixing Urinal valve auto closing system with built-in control cock & wall flange Jaguar make model PRS-CHR-077 or equivalent including T&P etc require for proper completion of work. |
| 135 | Providing and fixing Sink mixer with swinging spout (wall mounted model) with connecting legs & wall flanges Jaguar make model CQT-CHR-23309 or equivalent including T&P etc require for proper completion of work. |
| 136 | Providing and fixing Bib Cock with flange Jaguar make model CQT-CHR-23047 or equivalent including T&P etc require for proper completion of work. |
| 137 | Providing and fixing Angular Stop Cock with wall flange Jaguar make model CQT-CHR-23059 or equivalent including T&P etc require for proper completion of work. |
| 138 | Providing and fixing Single Towel Rail 600mm long stainless steel Jaguar make model ACN-CHR-1111SM or equivalent including T&P etc require for proper completion of work. |
| 139 | Providing and fixing Soap dispenser with Glass bottle Jaguar make model ACN-CHR-1135N or equivalent including T&P etc require for proper completion of work. |
| 140 | Providing and fixing Soap Dish Holder Jaguar make model ACN-CHR-1131N or equivalent including T&P etc require for proper completion of work. |
| 141 | Providing and fixing Counter top Basin size 705x460x195mm Jaguar make model ALS-WHT-85601 or equivalent including T&P etc require for proper completion of work. |
| 142 | Providing and fixing Single piece WC with UF soft close seat cover, Hinges, Single Flush Cistern Fitting, Fixing Accessories and Accessories set, size 380x660x785mm S Trap 300mm Jaguar make model OPS-WHT-15851S300UF or equivalent including T&P etc require for proper completion of work. |
| 143 | Providing and fixing Curved shaped urinal partition with frosted glass 10mm Jaguar make model JSE-CHR-110UC450X or equivalent including T&P etc require for proper completion of work |
| 144 | Providing and fixing Urinal (back inlet) with fixing accessories, size 385x325x635mm Jaguar make model URS-WHT-13253N or equivalent including T&P etc require for proper completion of work |
| 145 | Providing and fixing Hand Shower (Health Faucet) with 8mm Dia 1 Meter Long Flexible Tube & wall hook Jaguar make model ALD-CHR-573 or equivalent including T&P etc require for proper completion of work |
| 146 | Providing and fixing Waste coupling 32mm size full Thread with 130mm Height Jaguar make model ALD-CHR-705L130 or equivalent including T&P etc require for proper completion of work |
| 147 | Providing and fixing Bottle trap 32mm size 250mm & 190mm long wall connection pipes & wall flange Jaguar make model ALD-CHR-769L250x190 or equivalent including T&P etc require for proper completion of work |
| 148 | Painting with aluminium paint of approved brand and manufacture to give an even shade One or more coats on old work |
| 149 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender