Tender For Repair & Maintenance Of Non Residential Buildings I.E. Gmsh Sec 27, 28, 29 & 30 Dispensaries, S Ark Centers, Traffic Police Line Sector-29 & I.T.I. Sector 28, U.T. Chandigarh (Under maintenance Booth Sector-27)(Ch To: 2215 (N.P) Nrb )
Tender Value
5.11 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
0 days left
EMD
10223
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Maintenance Of Non Residential Buildings I.E. Gmsh Sec 27, 28, 29 & 30 Dispensaries, S Ark Centers, Traffic Police Line Sector-29 & I.T.I. Sector 28, U.T. Chandigarh (Under maintenance Booth Sector-27)(Ch To: 2215 (N.P) Nrb )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : DSR 4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR 4.1.3 |
| 3 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4 |
| 4 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 5 | Providing and fixing 1st quality / ceramic / vitrified glazed Floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make of size 300x300 (Colour & design as approved bt Engineer-in-charge) in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete in all respect make as approved by EIC. DSR 8.31 |
| 6 | 12 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7 |
| 7 | 1:3 (1 cement: 3 fine sand) DSR 13.7.1 |
| 8 | Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid. 10 ltr. low level white vitreous china flushing cistern & C.P. flush bend with fitting C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make DSR 17.3 |
| 9 | W.C. pan with ISI marked white soild plastic seat and lid DSR 17.3.1 |
| 10 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : DSR No. 17.7 |
| 11 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. DSR 17.7.3 |
| 12 | Providing and fixing white vitreous china water closet squatting pan (Indian type) DSR 17.13 |
| 13 | Orissa pattern W.C. pan of size 580x440 mm DSR 17.13.2.1 |
| 14 | Provding and fixing of C.P Bras jet with brass nozzle steel flange and PVC fkexible pipe 1/2\\" approximate 1 mtr length complete in all respect DSR 17.16A |
| 15 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. DSR No.17.15 |
| 16 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete DSR 17.19 |
| 17 | 10 litre (full flush) capacity DSR 17.19.1 |
| 18 | Providing and fixing solid plastic seat with lid for pedestal type W.C.pan complete : DSR No.17.20 |
| 19 | White solid plastic seat with lid DSR No.17.20.1 |
| 20 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR No. 17.28 |
| 21 | Flexible pipe DSR 17.28.2 |
| 22 | 32 mm dia DSR 17.28.2.1 |
| 23 | Providing and fixing soil, waste and vent pipes : DSR No. 17.35 |
| 24 | 100 mm dia. DSR 17.35.1.2 |
| 25 | 75 mm diameter : DSR 17.35.2.2 |
| 26 | Providing and fixing heel rest sanitary bend DSR No. 17.40 |
| 27 | 100 mm dia as per DSR No. 17.40.1.2 |
| 28 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR No. 17.60 |
| 29 | 100 mm inlet and 75 mm outlet DSR 17.60.2.1 |
| 30 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall. DSR 18.10 |
| 31 | 15 mm dia nominal bore DSR 18.10.1 |
| 32 | 20 mm dia nominal bore DSR 18.10.2 |
| 33 | 25 mm dia nominal bore DSR 18.10.3 |
| 34 | Providing and fixing of Gun-Metal Peat Valve DSR 18.17 |
| 35 | size 20mm i/d DSR 18.17.1A |
| 36 | size 15mm i/d (NSR) |
| 37 | Providing and fixing uplasticised PVC connection pipe with brass unions :DSR No. 18.21 |
| 38 | 15 mm nominal bore DSR 18.21.2.1 |
| 39 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR No. 18.46 |
| 40 | 15 mm nominal bore DSR 18.46.1 |
| 41 | 20 mm nominal bore DSR 18.46.2 |
| 42 | 25 mm dia nominal bore DSR 18.46.3 |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 44 | Providing and of fixing C.P. brass bib cock of approved quality DSR 18.49 |
| 45 | 15 mm nominal bore. DSR 18.49.1 |
| 46 | Providing and fixing C.P. brass long body bib cock of approved quality DSR 18.51 |
| 47 | 15 mm nominal bore. DSR 18.51.1 |
| 48 | Providing and fixing of Extension nippple DSR 18.53A |
| 49 | Providing and fixing PTMT bib cock of approved quality and colour. DSR 18.54 |
| 50 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. DSR 18.54.1 |
| 51 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. DSR 18.62 |
| 52 | 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. DSR 18.62.1 |
| 53 | 20 mm nominal bore, 105 mm long. Weighing not less than 138 gms. DSR 18.62.2 |
| 54 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms.DSR 18.63 |
| 55 | Providing and fixing drip seal joint |
| 56 | 100 mm dia. |
| 57 | 75 mm diameter : |
| 58 | Provding and fixing of Of C.P steel grating hole/ without hole heavy duty 10 mm dia complete in all respect of approved make |
| 59 | Provding and fixing of C.P long bend for OWC complete in all respect |
| 60 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 61 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 62 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 63 | Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board, PVC beading and C.P. Screw etc. to satisfaction of EIC of approved make |
| 64 | Providing and fixing of Chinaware Half stall Urinal with fittings, standard size C.P. brass flush pipe, spreaders and clamps all in C.P. brass complete in all respect Cat No. S4020112 Make M-cera size 375x390x590mm |
| 65 | Providing and fixing of white vitreous chinaware urinal partitions of size 90x320x720 mm complete in all respect Make M-cera S4090101 |
| 66 | Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation. |
| 67 | 110mm i/d |
| 68 | 75 mm i/d |
| 69 | Providing and fixing of PVC ball cock for Low level cistern complete in all respect. |
| 70 | Providing and fixing of PVC handle for Low level cistern complete in all respect. |
| 71 | Supplying & Fixing of Water Purifier with 3 Stage Purification system consisting of sediment filter, Activated Carbon Filter and Ultravoilet treatment having purification capacity of 200 LPH, water control sensor for automatic control of purifier as per level of water cooler and valve for back flushing of sediment filter complete of make Aquaguard, Kent, Blue Star or equivalent make in the same range of AOR |
| 72 | Providing and fixing of Voltage Stablizer suitable for 15 Ampere capacity working range 150 VAC to 285 VAC with low and high voltage cut off protection , built in thermal overload protection, digital / analog display for input / output voltage, wall mouted type, with metal cabinet complete of make V-Guard model VND 400 or equivalent model of Deol, Luminous, Microtech Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender