Tender For Development Of New Parks/Green Belts.Sh: Providing And Installing Set Of 14 Gym Equipments Including Maintenance Of The Same For 3Rd,4Th And 5Th Year In Community Park At Keshopur, Opposite Keshopur Fruits & Vegetable Market (Specialized W
Tender Value
7.33 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
5 days left
EMD
14667
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Development Of New Parks/Green Belts.Sh: Providing And Installing Set Of 14 Gym Equipments Including Maintenance Of The Same For 3Rd,4Th And 5Th Year In Community Park At Keshopur, Opposite Keshopur Fruits & Vegetable Market (Specialized Work).
BOQ
| Sl. No. | Item Description |
| 1 | Excavating holes more than 0.10 cum & up to 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto1.5 m. a)All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a)1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 3 | Providing and fixing \\"Air Walker\\" with the specifications below: 1. Dimensions (LxWxH): 1100 x 450 x 1300mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. U-shaped main frame of NB 80mm (G.I.) \\"C\\" Class Pipe, Leg Support frame of NB 50mm (0.1) \\"C\\" Class Pipe.4. Handy frame pipes of NB 32mm (G.I.) \\"C\\" Class (NB stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Baseplate cover made of virgin LLDPE plastic by rotational molding with a minimum of 4.00mm thickness, UV resistant and coloured.9. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury. 10. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.11. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.12. The equipment is to be fixed on the ground by providing and laying Cement Concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.13. High tensile steel with galvanized nut bolts is used for assembly.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.15. Equipment made to G5 Mark, EN16630, DIN 79000 & 150 14001 International standard for outdoor fitness equipment.16. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.17. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 4 | Providing and fixing \\"Horse Rider Station\\" with the specifications below:1. Dimensions (LxWxH): 1000 x 600 x 1100 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Main frame of NB 65mm (G.I.) \\"C\\" Class Pipe. 4. Handle support frame of NB 50mm (G.I.) \\"C\\" Class Pipe and other pipes of 4 NB 32mm & NB 25mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing.8. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.9. Foothold made of NB 32mm (G.I.) \\"C\\" Class Pipe. 10. Seat to be made up from virgin LLDPE manufactured by rotational moulding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly.11. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured. 12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and the nuts and bolts are covered with a baseplate cover. 15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 5 | Providing and fixing \\"Leg Press\\" in a pair with the below specifications:1. Dimensions (LxWxH): 2000 x 550 x 1600 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Seat Main frame of NB 50mm (G.I.) \\"C\\" Class Pipe and Pipe connecting main post to seat main frame of NB 65mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).4. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints. 5. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.6. Zinc primer paint is applied at all the welding points prior to finishing.7. Baseplate cover made of virgin LLDPE plastic by rotational molding of 4.00mm thickness, UV resistant and coloured.8. Foothold is made of NB 50mm (G.I.) \\"C\\" Class Pipe.9. Seats made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, are coloured, UV resistant and environmentally friendly. 10. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.11. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.12. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.13. Once the concrete is set, the equipment is fixed on to it and the nuts and bolts are covered with a baseplate cover.14. High tensile steel with galvanized nut bolts is used for assembly.15. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.16. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.17. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 6 | Providing and fixing \\"Pull Chair' in a pair with the below specifications:1. Dimensions (LxWxH): 2400 x 800 x 2000 mm.2. Fabricated with main post of NB 100mm (G.L.) \\"C\\" Class Pipe of approved make. 3. Seat main frame of NB 50mm (G.L.) \\"C\\" Class Pipe, Pipe connecting main post with handle frame of NB 65mm (GL) \\"C\\" Class Pipe.4. Handle frame of NB 32mm (G.L.) \\"C\\" Class Pipe. (\\"NB\\" stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high-end quality rubber grips.9. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly.11. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 7 | Providing and fixing \\"Seated Chest Press\\" in a pair with the below specifications:1. Dimensions (LxWxH): 1800 x 700 x 2000 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make. 3. Seat Main frame of NB 50mm (G.I.) \\"C\\" Class Pipe.4. Handle frame of NB 32mm and NB 25mm (G.I.) \\"C\\" Class Pipe.('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs. 7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high-end quality rubber grips. 9. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly. 11. Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements. 13. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 8 | Providing and fixing an \\"Arm Wheel\\" in a pair with the below specifications:1. Dimensions (LxWxH): 850 x 800 x 1800 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make. 3. Wheel frame of NB 32mm with connecting spokes of NB 25mm, Pipe connecting main pilar with wheel frame of NB 50mm. All pipes must be (G.I.) \\"C\\" Class Pipes ('NB' stands for Nominal Bore Size, i.e., Internal Diameter of pipe in millimetres). 4. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.5. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.6. Zinc primer paint is applied at all the welding points prior to finishing.7. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured.8. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.9. The equipment is to be fixed on the ground by providing and laying Cement Concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J shaped welded bolts of 18mm thickness.10. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.11. High tensile steel with galvanized nut bolts is used for assembly.12. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.13. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.14. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 9 | Providing and fixing \\"Double Cross Walker \\"with the specifications below:1. Dimensions (LxWxH): 1600 x 600 x 1600 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Handle main frame of NB 50mm and other connecting pipes of NB 32mm and NB 25mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore Size, i.e., Internal Diameter of pipe in millimetres).4. Foot support frame of 96 x 46 x 3mm MS rectangular pipe. 5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Baseplate cover made of virgin LLDPE plastic by rotational molding with a minimum of 4.00mm thickness, UV resistant and coloured.9. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury.10. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured. 11. The equipment must be fitted with inbuilt limiters to prevent unwanted movements. 12. The equipment is to be fixed on the ground by providing and laying Cement Concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J shaped welded bolts of 18mm thickness.13. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.14. High tensile steel with galvanized nut bolts is used for assembly.15. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.16. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.17. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 10 | Providing and fixing \\"Triple Twister\\" with the specifications below:1. Dimensions (LxWxH): 1300 x 1300 x 1650 mm. 2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Handle Main frame of NB 32mm (G.I.) \\"C\\" Class Pipe.4. Handle frame spokes of NB 25mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetres).5. Foothold plate made of MS Sheet Metal of 3mm thickness.6. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.7. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.8. Zinc primer paint is applied at all the welding points prior to finishing.9. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.10. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.11. Once the concrete is set, the equipment is fixed on to it.12. High tensile steel with galvanized nut bolts is used for assembly.13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 14. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.15. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 11 | Providing and fixing a \\"Rowing Machine\\" with the below specifications:1. Dimensions (LxWxH): 1250 x 800 x 1150 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make.3. Main frame of NB 65mm (G.I.) \\"C\\" Class Pipe. 4. Handle support frame of NB 25mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Baseplate cover made of virgin LLDPE plastic by rotational molding of 4.00mm thickness, UV resistant and coloured.9. Foothold made of NB 50mm (G.I.) \\"C\\" Class Pipe.10. Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, coloured, UV resistant and environmentally friendly.11. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured.12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is to be fixed on the ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with a baseplate cover.15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 12 | Providing and fixing \\"Air Swing\\" in pair with the below specifications:1. Dimensions (LxWxH): 1150 x 900 x 1250 mm.2. Fabricated with main post of NB 100mm (G.I.) \\"C\\" Class Pipe of approved make. 3. Leg Support frame of NB 50mm (G.I.) \\"C\\" Class Pipe. 4. Handle support frame of NB 32mm (G.I.) \\"C\\" Class Pipe. ('NB' stands for Nominal Bore i.e., Internal Diameter of pipe in millimetres).5. All pipes are powder-coated with 80–120-micron thick AkzoNobel or equivalent paints.6. All joints of pipe are MIG welded with joints scalloped as necessary and dressed off, removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high-end quality rubber grips.9. Baseplate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and coloured. 10. Foothold made of MS Sheet Metal with rounded edges to prevent impact and injury.11. Maintenance-free bearings of SKF or equivalent make duly oil-sealed and self-lubricated are used in the equipment manufactured. 12. The equipment must be fitted with inbuilt limiters to prevent unwanted movements.13. The equipment is to be fixed on the ground by providing and laying Cement Concrete with a minimum size of block to be constructed of 0.60 mtr x 0.60 mtr x 0.60 mtr (Payment for CC to be used in fixing of equipment shall be done separately) and J-shaped welded bolts of 18mm thickness.14. Once the concrete is set, the equipment is fixed on to it and the nuts and bolts are covered with a baseplate cover.15. High tensile steel with galvanized nut bolts is used for assembly.16. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.17. Self-Explanatory stainless-steel label fixed on equipment for ease of use, including maintenance cost for 2 years.18. This rate is inclusive of GST Charges, Transportation Charges, Fixing Charges and CPOH. Nothing shall be paid extra. |
| 13 | P/F ELLIPTICAL EXERCISER:-1. Dimensions (LxWxH): 1200 x 550 x 1600 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3. Main frame of NB 80mm (G.I.) ‘C’ Class Pipe.4. Handle frame of NB 32mm and NB 25mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters).5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints.6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Handle bars are provided with high end quality rubber grips.9. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.10. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.11. The equipment is fixed on ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60mtrx0.60mtr0.60mtr (Payment of CC to be used in fixing of equipment shall be done separately) of and J shaped welded bolts of 18mm thickness.12. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.13. High tensile steel with galvanized nut bolts are used for assembly.14. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.15. Self-Explanatory stainless steel label fixed on equipment for ease of use.16. Foothold made of Co-Polymer Plastic with ounded edges to prevent impact and injury.17. This rate inclusive of maintenance cost for 2 years as well as GST Charge, Transportation charge , Fixing charge and CPOH .Nothing shall be paid extra. |
| 14 | P/F STAIR STEPPER WITH TWISTER:-Stair stepper in a combination / pair with a stepperon one side and a twister on other side:1. Dimensions (LxWxH): 1000 x 800 x 1400 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe inmillimeters)3. Twister main frame of NB 32mm (G.I.) 'C' Class Pipe and Handle frame of NB 32mm (G.I.) ‘C’ Class Pipe. Twister Foothold plate of made of MS Sheet Metal of 3mm thickness.4. Stepper main frame of MS pipe 96 x 46mm and Handle frame of NB 32mm & 25mm (G.I.) ‘C’ Class Pipe.5. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints.6. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.7. Zinc primer paint is applied at all the welding points prior to finishing.8. Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury.9. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured.10. The equipment is fixed on ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60mtrx0.60mtr0.60mtr (Payment of CC to be used in fixing of equipment shall be done separately) of and J shaped welded bolts of 18mm thickness.11. Once the concrete is set, the equipment is fixed on to it.12. High tensile steel with galvanized nut bolts are used for assembly.13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.14. Self-Explanatory stainless steel label fixed on equipment for ease of use.15. The equipment are fitted with inbuilt limiters to prevent unwanted movements.16. Base plate cover made of virgin LLDPE plastic by rotational moulding with 4.00mm thickness, UV resistant and coloured.17. This rate inclusive of maintenance cost for 2 years as well as GST Charge, Transportation charge , Fixing charge and CPOH .Nothing shall be paid extra. |
| 15 | Providing and fixing Sit Up Station with below specifications: 1. Dimensions (LxWxH): 1500 x 1150 x 650mm 2. Fabricated with main frame of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3. Main frame of NB 25mm (G.I.) ‘C’ Class Pipe. 4. Leg support of NB 65mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 5. The back support Fixed on its top is made of perforated MS sheet of 2mm thickness. 6. All pipes are powder coated using Akzo Nobel or equivalent Paint of 80-120 micron thick. 7. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 8. Zinc primer paint is applied at all welding points prior to finishing. 9. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. 10. The equipment is fixed on ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60mtrx0.60mtr0.60mtr (Payment of CC to be used in fixing of equipment shall be done separately) and J shaped welded bolts of 18mm thickness.11. Once the concrete is set, the equipment is fixed on to it.12. High tensile steel with galvanized nut bolts are used for assembly. 13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.14. Self-Explanatory stainless steel label fixed on equipment for ease of use. including maintenance cost for 2 year. 15. This rate is inclusive of maintenance cost for 2 years as well as GST Charges, Transportation Charges, Fixing Charges and CPOH Nothing shall be paid extra |
| 16 | P/F EXERCISING BAR:-1. Dimensions (LxWxH): 1800 x 550 x 1500 mm2. Fabricated with main post of NB 100mm (G.I.) ‘C’ Class Pipe of approved make.3. Main frame of NB 32mm (G.I.) ‘C’ Class Pipe. (‘NB’ stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters).4. Leg support of NB 65mm (G.I.) \\"C\\" class pipe of approved make.5. Fixed on its top is back support made of perforated MS sheet of 2mm thickness.6. All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints.7. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.8. Zinc primer paint is applied at all the welding points prior to finishing.9. Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored.10. The equipment is fixed on ground by providing and laying cement concrete with a minimum size of block to be constructed of 0.60mtrx0.60mtr0.60mtr (Payment of CC to be used in fixing of equipment shall be done separately) of and J shaped welded bolts of 18mm thickness.11. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover.12. High tensile steel with galvanized nut bolts are used for assembly.13. Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment.14. Self-Explanatory stainless steel label fixed on equipment for ease of use.15. Pipe and sheet components should be cut by atleast 2KW laser machine having CNC made components welded using robot with atleast 2 metre welding range.16. This rate inclusive of maintenance cost for 2 years as well as GST Charge, Transportation charge , Fixing charge and CPOH .Nothing shall be paid extra. |
| 17 | Regular maintenance of all the Gym equipments installed in DDA parks as per 'Schedule-A' at free of cost for initial two years and thereafter for three years as per rates quoted for 'Schedule-B' consisting following terms and conditions :-a) Inspect and adjust of drive, timing and running belts.b) Check and set right/replacement for worn bearings, misaligned moving points, adjust/tighten loose parts, covers, seats, foundation and flooring.c) Tighten of nuts/bolts/screws i/c welding of various part/joints of equipments wherever required.d) Calibration of Instruments.e) Priming coat & painting coat, if required.f) Lubrication/ oiling.g) Replacement/repair of parts of equipment in case of Theft/ vandalism.h) Replacement of damaged parts & rectification of any others defects observed as per direction of Engineer-in-charge except : i. Due to Force majeure or ii. Abnormally bad weather, serious loss or damage by fire or iii. Damage due to act of god or iv. Any other cause which in the absolute discretion of the engineer-in-charge is beyond the contractors control .Note: -1. Agecny must have to install an informatory sigange board at each gym site displaying name & number of the agency to receive the complaint(s) regarding Gym maintenance, period of maintenence, safety instructions etc. & other details as per direction of EIC.2. In case of any complaint is received, agency have to rectify it within 72 hours beyond which a penalty of Rs. 1000/- per day per equipment shall be recovered from the agency.3. Rates for maintenance of open GYM equipments is considered for a single set of 16 equipment however quantity may be increased/decreased as per site execution on pro-rata basis. Maintenance cost (i) For 3rd year for all 16 Nos. of Gym Equipments at all 12 locations |
| 18 | (ii) For 4th yearfor all 16 Nos. of Gym Equipments at all 12 locations |
| 19 | (iii) For 5th yearfor all 16 Nos. of Gym Equipments at all 12 locations |
| 20 | Sum of DSR Items : (Item No. 1 & 2): |
| 21 | Sum of DSR items after adding GST modification factor @0.973: |
| 22 | Add Cost Index @3% on DSR items: |
| 23 | Total: (Say \\"A\\"): |
| 24 | Sum of Market Rate items: (i.e. item No. 3 to 19): (Say \\"B\\"): |
| 25 | Total Rs. (A+B): |
| 26 | Say Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender