Tender For Renovation Work For Exsisting Old Community Sanitary Complex Including Toilet At Be College Telephone Exchange Compound, Howrah
Tender Value
4.89 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
1 days left
EMD
9797
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Work For Exsisting Old Community Sanitary Complex Including Toilet At Be College Telephone Exchange Compound, Howrah
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 3 | In cement mortar |
| 4 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 5 | Of area 3 sq. metres and below |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 7 | For thickness of tiles 10 mm to 25 mm |
| 8 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 10 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 12 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 13 | 1:3:6 (1 Cement : 3 coarse sand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 15 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 16 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finishedsmooth. |
| 17 | Granite Stone of approved shade |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : |
| 20 | 100X58X1.90 mm |
| 21 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 22 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessaryaccessories and screws etc. complete. |
| 23 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: |
| 24 | 125 mm |
| 25 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 26 | Twin rubber stopper |
| 27 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 28 | Providing and fixing to existing door frames. |
| 29 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 30 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. |
| 31 | 125mm |
| 32 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. |
| 33 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 34 | For fixed portion - Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 35 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 36 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 37 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 38 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 39 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 40 | Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-charge. |
| 41 | Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. |
| 42 | Anodized (AC 15 ) aluminium tubular handle bar |
| 43 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 44 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 45 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 46 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 47 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm |
| 48 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 49 | Size of Tile 600x600 mm |
| 50 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 51 | 75 mm diameter |
| 52 | 110 mm diameter |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 54 | Coupler -110mm |
| 55 | Single tee with door - 75x75x75 mm |
| 56 | Single tee with door -110x110x110 mm |
| 57 | Bend 87.5° - 75 mm bend |
| 58 | Bend 87.5° - 110 mm bend |
| 59 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 60 | 75 mm |
| 61 | 110 mm |
| 62 | 12 mm cement plaster of mix : |
| 63 | 1:4 (1 cement: 4 coarse sand) |
| 64 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 65 | 1:4 (1 cement: 4 coarse sand) |
| 66 | Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. |
| 67 | Finishing walls with water proofing cement paint of required shade : |
| 68 | New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 69 | Wall painting with premium acrylic emulsion paint with Royal emulsion of Asian paint or its equivalent paint of approved shade to give an even shade: |
| 70 | Two or more coats on new work. |
| 71 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 72 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 73 | Two coats. |
| 74 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 75 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 76 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 77 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 78 | One or more coats on old work. |
| 79 | French spirit polishing : |
| 80 | One or more coats on old work. |
| 81 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 82 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 83 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 84 | (a) Internal Work- Exposed on wall |
| 85 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 86 | Black solid plastic seat with lid |
| 87 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 88 | Flexible pipe -32 mm dia |
| 89 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 90 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 91 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 92 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 93 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 94 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 95 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 96 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 97 | 15 mm nominal outer dia. Pipes. |
| 98 | 25 mm nominal outer dia. Pipes. |
| 99 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 100 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 101 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 102 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 103 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 104 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 105 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 106 | 15 mm nominal bore with 45 cm length. |
| 107 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge |
| 108 | 25 mm average thickness |
| 109 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. |
| 110 | Bars upto 12 mm diameter |
| 111 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. |
| 112 | SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer |
| 113 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). |
| 114 | 25 mm average thickness in 2 layers. |
| 115 | Servicing of rolling shutter by greasing,oiling and tensioning of springs for making smooth functioning of shutter all etc.complete as per direction of Engineer in Charge . |
| 116 | Renewing spring of rolling shutter as per existing size & shape. Supplying of spring for repairs to rolling Shutter |
| 117 | Renewing lock of rolling shutter. |
| 118 | Expenditure for writing on main gate of T.E. Compound \\"BSNL\\", \\"Name of Telephone Exchange\\", \\"Connecting India faster\\" & drawing logo of BSNL in different colours and shades by professional paint artist all complete as per direction of Engineer-in-charge. |
| 119 | Shifting of all serviceable materials from the old CSC room of Shibpur BE College TE Compound to the store or the location directed by the Competent Authority and dispose the unserviceable materials, garbage / rubbish etc out of the TE compound to the nearest Municipal dumping ground out side the BSNL complex all complete as per direction of Engineer in Charge. |
| 120 | Labour charges for attending minor carpentry works like cutting portion of existing counter tables, fixing beading or laminates to cut portion , joining tables, making adjustment to drawers etc (maxm upto 4 counters) complete as per direction of Engineer-in-charge. (Cost of new beadings/laminates/fixtures except screws & adhesives to be paid for separately) |
| 121 | P/f 4mm thick teek veener over the surface area of exsisting CSC counter (old work) at CSC building of Shibpur BE college TE compound as per standard design and approved colour of Competent Authority including necessary repairing (wherever required) and cleaning of surfaces all etc complete as per direction of E-in-Charge. |
| 122 | Cleaning of sewer line, sewer manhole, gully chamber by using bamboo/rod and taking out the sludge, debris, rubbish and other waste materials, if any and flushing with sufficient quantity of water with pressure to asertain through cleaning & smooth as well as proper functioning of sewer line including disposal of all waste material outside the municipal limit or burried in to pits at safe available distence all etc complete as per direction of Engineer in charge.( Note: The operation includes cost of all and nothing shall be paid extra on any account.) |
| 123 | P/f PVC Health Faucet (water tech)of 15 mm dia approved make with 1.00 mtr pvc pipe for Indian /Uropian type water closet all etc fitting fixing complete as per direction of Engineer in charge. |
| 124 | Spraying weedicides like Roundup [GLYPHOSATE 41% S.L( I.P.A salt)] mixing with water @20ml/litre of water, and spray over the weedicides, grass, plants like Banyan, Pipul etc. which grows on around plinth of the building . Throughly spraying is to be done until all leaves of the weedicides or plants showered as per direction of the Engineer-in-charge. [Note: (1) Spraying is advised on sunny days so that at least leaves can get sufficient time for absorption of the chemical (2) For ground, and area around buildings, sides of road and drain etc. plan area will be measure for payment ] |
| 125 | Repairs to aluminium door (one or double shutter door) by adjusting hydraulic floor spring, pivot, loose member joints, etc. complete as per direction of the Engineer-in-charge. (Cost inclusive of renewal of neoprine/EPDM gasket. Floor spring, pivot, alumimium member etc. if required will be paid seperately). |
| 126 | Supplying, fitting and fixing flat back urinal (half stall urinal) size-535x355x340 mm (Hindware or Peryware brand) combo set with spreader, waste and waste pipe in white vitreous chinaware of Parryware or equivalent make in position with brass screws on 75 mm x 75mm x 75 mm wooden block complete. . |
| 127 | P/f PVC Twoway bib cock (Prayag Catlg No-129-O or equivalent) of 15 mm dia approved make for Indian /Uropian type water closet all etc fitting fixing complete as per direction of Engineer in charge. |
| 128 | Taking out exsisting PVC mat from floor of old CSC room (room floor size 6.57X7.42 m.) at Shibpur BE college TE compund along with shifting of furniture if required and disposal of same beyond 50 mtr lead all etc complete as per direction of Engineer in charge. |
| 129 | Takingout exsisting faulse ceiling (Room Size 6.57 X 7.42 m) board/tiles (600mm X 600 mm), cleaning and removing rust from MS frame work by scrapping then painting with sythetic enamel paint i/c primer (Burger or equivalent) & celing board also to be painted after refixing the tiles all etc complete as per direction of Engineer in charge.(Note:- New ceiling board to be paid extra if required) |
| 130 | Credit Value:- |
| 131 | 15 mm dia GI pipe |
| 132 | 20 mm dia GI pipe |
| 133 | 25 mm dia GI pipe |
| 134 | Reinforcement/Iron mamber |
| 135 | Wooden member/furniture |
| 136 | Providing & fixing photo frame (1.20 m X 0.600 m) with height adjustable lobby stand (polish grade stainless steel base & stand) (25 mm dia G.I pipe or equivalent) photo stand use as a background for taking photograph of BSNL customer for Aadhar seva, mobile connection etc. consisting of 12mm laminated particle board covered with aluminium channel fixed over a lobby stand. All material should be approved brand & manufacture as per direction of Engineer -in- charge. (The final rate are including carriage for supply at site , all complete) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender