Tender For Additional Work Of Aluminium Window With Dgu Glass Work In C.C.B In Existing Hospital, Jhunjhunu
Tender Value
58.88 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
0 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhunjhunu → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Additional Work Of Aluminium Window With Dgu Glass Work In C.C.B In Existing Hospital, Jhunjhunu
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing aluminum work for doors ,windows, ventilators and partition with extruded built up standard tubular / appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips ,or with expansion hold fasteners including necessary filling up of gap. at junctions , at top ,bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth ,rust free, straight ,mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing /paneling , C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc.,all complete as per architectural drawings and the directions of Engineer- in – charge .(Glazing and paneling to be paid for separately). |
| 2 | For fixed portion. Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) |
| 3 | For shutters builtup standard tubular sections of openable doors ,windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required (lockes shall be paid for separately). Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) |
| 4 | Extra for shutters of sliding aluminum windows |
| 5 | S&f fixed wire gauge of stainless steel of 14 mesh x 24 gauge to the aluminium window by Aluminium beading 20x3mm with suitable screws not exceeding 150mm distance at all heights with all lead and lift with scafolding. |
| 6 | Providing and fixing expanded grill made of aluminum as per design and drawing having members section of size 7.5mm x 6.0mm and opening of size 102mm x 99mm to aluminum window/vent with required screws, Y and H aluminium sec (as per drawing) at the ends and middle joints respectively complete in all respect as per direction of engineer in charge. Polyester Powder coating aluminum ( minimum thickness of powder coating 50 micron) |
| 7 | Filling the gap upto 5 mm depth and 5 mm width in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. |
| 8 | Providing & Fixing double glazed units at all floors in existing aluminium windows, using of hermetically sealed ( with primery sealant - Butyl & secondary sealant - Silicone or Polysulphide) 24mm thick , double glazed unit (DGU) with outer glass as 6mm thick, Soft coated silver layered reflective, low e toughened glass of approved make . Inner glass should be 6mm toughned clear glass of approved make (Iron content <1000 PPM). Both the glasses to be separated by an Aluminium spacer to create a 12mm gap which would be air filled . Moleculer sieve Desiecant to be used to fill the Aluminium Spacer. ( Measurement for payment shall be from one side of unit as per actual size) DGU specifications shall be as follows Maximum U value - 1.8 W/Sqm Dg C Maximum SHGC - 0.24 Minimum VLT - 36.00% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender