Tender For Repairs And Maintenece To Central Geomatics Laboratory
Tender Value
41.55 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
13 days left
EMD
83110
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs And Maintenece To Central Geomatics Laboratory
BOQ
| Sl. No. | Item Description |
| 1 | APPENDIX - A-CIVIL WORKS |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 3 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting,unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 4 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stackingof serviceable material with in 50 meters lead as directed by Engineerin- charge. |
| 5 | Carpenter for dismantling and disassembling wooden work-table, wall mounted cupboards, shelves, etc. of work-station by unscrewing and loosening its joints & detaching it from wall and stacking the same as directed by the engineer in-charge |
| 6 | Coolee / manmazdoor for assisting the carpenter to dismantle the wooden work-table, cupboards, shelves, etc. of work-station and stacking the same as directed by the engineer in-charge |
| 7 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete andstacking within 50 metres lead : |
| 8 | Of area 3 sq. metres and below |
| 9 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 10 | Of area 3 sq. metres and below |
| 11 | Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). |
| 12 | 12 mm cement plaster of mix : |
| 13 | 1:4 (1 cement: 4 fine sand) |
| 14 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 15 | 1:3 (1 cement: 3 fine sand) |
| 16 | for fixed portion-Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 17 | Powder coated aluminium (minimumthickness of powder coating 50 micron) |
| 18 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 19 | Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 21 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 22 | Providing and fixing 04 mm thick Aluminium Composite Panel(ACP) double side coated and factory finished decorative lamination on both sides or faces , in panelling fixed in aluminum doors, windows shutters and partition frames with aluminium clips,beedings or aluminium locking arrangements or C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. |
| 23 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyedto required colour or shade, with necessary screws etc. complete : |
| 24 | 250x10 mm |
| 25 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyedto required colour or shade, with necessary screws etc. complete : |
| 26 | 125 mm |
| 27 | Supplying and fixing Aluminium handle with locking arrangements suitable for aluminium windows |
| 28 | Supplying and fixing 300 mm Aluminium aldrop |
| 29 | Supplying and fixing I-max hinges |
| 30 | Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete. |
| 31 | 205 X 19 mm |
| 32 | Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 33 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete. |
| 34 | Polyester powder coated minimum thickness 50 micron aluminium |
| 35 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 36 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. |
| 37 | Cost for 3mm self levelling required on existing tiled floor by using the material such as Ardex Endura including all cost of materials and labour for levelling and cleaning, moping & washing the tile surface before the comencement of levelling work |
| 38 | Flooring (supply and installation) with 2mm thick homogeneous Vinyl Floor material (like Wonderfloor Adventus or likewise material) of Pearl white colour including all cost of materials and labour for installation, fixing, laying, coving with coving material, PVC welding with cord etc. as per the direction of engineer in-charge but excluding cost of self levelling etc complete |
| 39 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm |
| 40 | fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 41 | GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. |
| 42 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall bepaid for separately). |
| 43 | Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 44 | Frame size 65 x 100 mm |
| 45 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of Shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 46 | 35 mm thick |
| 47 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : |
| 48 | 125x64x2.50 mm |
| 49 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : |
| 50 | 250x10 mm |
| 51 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. |
| 52 | Providing and fixing bright finished brass handles with screws etc. complete: |
| 53 | 125 mm |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge- Concealed work, including cutting chases and making good the walls etc. |
| 55 | 20 mm nominal dia Pipes |
| 56 | 25 mm nominal dia Pipes |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge- Internal work- Exposed on wall |
| 58 | 25 mm nominal dia Pipes |
| 59 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 60 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Note: two or more coats |
| 61 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 62 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 63 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : |
| 64 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 65 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriatepriming coat, preparation of surface, etc. complete. |
| 66 | On concrete work |
| 67 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre ofapproved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 68 | Two coats |
| 69 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 70 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface |
| 71 | Melamine polishing on wood work (one or more coat). |
| 72 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineerin-Charge.- (apply DrFixit Roof seal select/ultra like material for horizontal surface and DrFixit Rain coat select/ultra like material for vertical surfaces- work shall be carried out by engaging company/ manufacture approved trained water-proof applicators after the removal of fungas & dirt by using pressure wash of water and filling the cracks with suitable sealents or crack filler by using putty blade) |
| 73 | Sub Total-A |
| 74 | Total Amount for Non-DSR Items |
| 75 | Total Amount for DSR Items |
| 76 | Modified cost on DSR item after using Correction factor on DSR 2023 on account of GST@ 0.973 |
| 77 | add 36% towards cost index |
| 78 | Grand Total -(Civil)-A |
| 79 | APPENDIX - B-ELECTRICAL WORKS |
| 80 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.Group C |
| 81 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 82 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 83 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 84 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 85 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 86 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 87 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit /CMS as required. |
| 88 | 6 x 1.5 sq. mm |
| 89 | 3 x 4 sq. mm |
| 90 | 6 x 4 sq. mm |
| 91 | 9 x 1.5 sq. mm |
| 92 | 10 x 4 sq. mm |
| 93 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 94 | 20 mm |
| 95 | 25 mm |
| 96 | Supplying and fixing of uPVC cable management system (wall trunking) of following sizes on surface with all accessories etc required. 105mm x 50mm |
| 97 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 98 | 1 or 2 Module (75mmX75mm) |
| 99 | 3 Module (100mmX75mm) |
| 100 | 6 Module (200mmX75mm) |
| 101 | 12 Module (200mmX150mm) |
| 102 | 8 Module (125mmX125mm) |
| 103 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 104 | 15/16 A switch |
| 105 | 6 pin 15/16 A socket outlet |
| 106 | Telephone socket outlet |
| 107 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Data socket outlet |
| 108 | Supply,Installation, testing and commissioning following sizes of 250 mm plastic body exhaust fan in the existing opening including making good the damages, connections, etc. as required. |
| 109 | SITC of Indoor 2feet x2feet square type 30/36W LED lighting luminaire of cool day light output and the following specifications: Lumen output: Not less than 3300lm; Efficiency: 100 lumen/watt; Make: Philips / Wipro , Bajaj or Crompton ,Havells |
| 110 | Supplying and Installing Surface mounted 4 feet linear LED batten fitting with extruded aluminium / metal housing and of the following specifications: Lumen output: not less than 4000 lumen; System efficacy: not less than 100 Lumen/Watt i/c connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 111 | SITC of indoor Surface mounting LED downlighter having high efficiency diffuser along with suitable constant current driver and complying to the following specifications: Lumen output: not less than 1500 lm; Efficacy: not less than 100 lumen/W i/c connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 112 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 113 | 8 way (4 + 24), Double door |
| 114 | 4 way (4 + 12), Double door |
| 115 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 116 | 4 way (4 + 12), Double door |
| 117 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 118 | Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V \\"C\\" curve TP MCB complete with connections, testing and commissioning etc. as required. |
| 119 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as Single pole required.Supplying and making end termination with brass compression gland and aluminium lugs for following sizes of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required |
| 120 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 121 | 100 A |
| 122 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 123 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.100A |
| 124 | Supplying and fixing following rating,TP MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.63A |
| 125 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting,boring rejointing the pipe with suitable materials etc.direct in ground ( below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 126 | 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 127 | 200 mm dia (OD-200 mm & ID-203 mm nominal) |
| 128 | Supplying of XLPE insulated, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade conforming to IS: 7098 ( Part-I) with up-to-date amendments of following sizes as required. |
| 129 | 3.5 x 70 Sq.mm |
| 130 | 3.5 x 50 Sq.mm |
| 131 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) |
| 132 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 133 | Upto 35 sq. mm |
| 134 | Above 35 sq. mm and upto 95 sq. mm |
| 135 | Above 95 sq. mm and upto 185 sq. mm |
| 136 | Supplying and making end termination with brass compression gland and aluminium lugs for following sizes of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3½ X 70 sq. mm (38mm) |
| 137 | Supplying and making end termination with brass compression gland and aluminium lugs for following sizes of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required3½ X50q. mm (45mm) |
| 138 | Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. |
| 139 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 140 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 141 | Supplying and installation following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required. |
| 142 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 143 | 450 mm width X 50 mm depth X 2.0 mm thickness |
| 144 | Supply ,Installation, testing & commissioning of cubicle type Panel suitable for 415V,3 phase, 4 wire 50 Hz AC supply system having required front surface area Approx and 300mm depth fabricated in compartmentalised design from CRCA Sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates i/c cleaning and finishing complete with 7 tank /abrasive blasting process for powder coating in approved shade, having 250 amps capacity TPN Aluminium bus bar of high conductivity, DMC/SMC bus bar supports, with short circuit withstand capacity of 31MVA for 1 sec., bottom base channel of section not less than 75mm X75mm X 5mm thick with following fabrication shall be done in transportable section.Entire panel shall have a common GI earth bar of size 32mm X 5mm at the rear with 2 nos. earth stud, solid connections for main bus bar to switch gears with required size of copper bus bars and control wiring with 1.5 sq.mm. FRLS PVC Insulated copper conductor single core cable, cable alleys, cable gland plates in half, MV danger notice board i/c providing following switch gears complete as required . |
| 145 | Incomer: |
| 146 | a)250 Amps, 4P, 25 KA MCCB (Ics = 100% Icu) with thermal magnetic release for over current, short circuit Release, extended rotary handle etc 1 No. |
| 147 | Bus Bar |
| 148 | 250 amps 4 strip Copper Bars of suitable size with a current density not more than 1.2A / Sqmm. The bus bars shall be sleeved with colour coded heat shrinkable PVC sleeves. The bus bars shall be supported at suitable intervals with SMC / FRP supports as per relevant standards. |
| 149 | Outgoings: |
| 150 | 2NoS 200A FP 25kA ,2Nos 125A FP 25kA thermo-magnetic release type MCCB complete with operating handle, spreader links, phase barriers etc. |
| 151 | 2NoS 125A FP 25kA ,2Nos 125A FP 25kA thermo-magnetic release type MCCB complete with operating handle, spreader links, phase barriers etc. |
| 152 | 3Nos 63A FP 16 kA thermo-magnetic release type MCCB complete with operating handle, spreader links, phase barriers etc. |
| 153 | Indication lamps ,Metering modules -1set each |
| 154 | Dismantling of all old wirings,DB,switch boards,etc and handed over the same in the department store including transportation etc as required |
| 155 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 156 | Sub Total-B |
| 157 | Total amount Non DSR |
| 158 | Total amount DSR |
| 159 | CI 32.04 % |
| 160 | Grand TOTAL (Electrical -B) |
| 161 | Grand Total (A+B) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender