Tender For Face Lifting/Repair & Maintenance Of Fish Landing Center At Durgapur In Diglipur, North Andaman
Tender Value
56.45 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
6 days left
EMD
1.12 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Face Lifting/Repair & Maintenance Of Fish Landing Center At Durgapur In Diglipur, North Andaman
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling cement concrete 1:3:6 or richer mix including disposal of dismantled materials. as directed by EIC, including cost of all labour charges, minor tools, GST, LWC etc., complete. |
| 2 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismenbering and stacking within 50 metres lead, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. |
| 3 | Providing and fixing of hot dipped galvanised iron mooring ring 32mm dia with U hook at the required locations, level and alignment as directed by the EIC and as per the approved drawings, including cost of mooring rings and other required materials, hire charges of crane with POL and operator, cost of all labour charges, transportation charges, GST, labour welfare cess, and minor tools etc., complete. |
| 4 | Providing and laying cement concrete 1:2:4 (one cement, two pulverized stone sand and four stone chips of 20mm size) below footing, plinth beam as directed by the EIC, screening & washing of both the aggregates, mixing, placing, curing. Including cost of cement OPC 43, nominal centering & shuttering charges, cost of pulverized stone sand & stone metal from local quarry , GST, labour welfare cess etc. complete. |
| 5 | Providing and laying RCC 1:1.5:3 (1 cement, 1.5 Pulveraised stone sand & 3 stone chips of size 20 mm grade) in all RCC works as directed by the EIC, excluding cost of fabrication charges which will be paid seperately, but including cost of aggregates and pulvarised sand sand from local quarry, cost of cement OPC 43, nominal centering & shuttering charges, LWC, GST, etc, complete. |
| 6 | Providing form work including centering and shuttering so as to give a rough finish, shuttering and proping etc. (height of propping and centering below supporting floor to ceiling not exceeding 4m) and removal of the same in situ reinforcement cement concrete and plain concrete work using standard hard wood including cost of timber, all labour charges, nails, cost of minor tools, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. |
| 7 | Fabrication and fixing of reinforcement for all R.C.C works including cost of steel Fe 500 grade ISI and Sail marked steel, binding wire, all labour charges, transportation charges of all materials to work site, cost of minor tools, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. |
| 8 | Plastering with cement mortar 1:4 (1 cement and 4 mainland river sand) for 12 mm thick over column, exposed concrete surface etc. including cost of OPC 43 grade cement, mainland river sand, screening and washing of the all sand, all charges, curing transportation charges of all materials to work site and minor tools, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. |
| 9 | Steel work in built up G.I. tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers, including cost of G.I. pipe, all labour charges, transportation charges of all materials to work site, minor tools and plants, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. |
| 10 | Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, using structural steel etc. as required in gratings, frames, gaurd bar, ladders, raillings, brackets, gates & similar works, cost of all other materials, all labour charges and transportation charges of all materials to work site, minor tools, LWC, GST, etc., complete.The rate is inclusive of all consumable items and GST. |
| 11 | Providing and fixing of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by EIC) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as pe IS: 277, in 240 mpa stell grade, 5-7 microns epoxy primer om both sides of the sheet and polyster to coat 15-18 microns. Sheet should have protective guard film of 25 meter or as disired by EIC. The sheet shall be fixed using self drilling/self tapping screws of size(5.5x55mm)with EPDM seal complete upto any pitch in horizontal/vertical or curved surfaces, excluding cost of purlins, including the cost of precoated steel sheets, screws, washers, drilling holes, cost of hire charges of drilling machine, transportation charges of all materials to worksite, all labour charges, minor tools, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. |
| 12 | Providing and fixing of precoated steel roofing ascessories 0.50 mm (+0.05%) total coated thickness, zinc coating 120 grams per sqm as pe IS: 277, in 240 mpa stell grade, 5-7 microns epoxyprimer om both sides of the sheet and polyster to coat 15-18 microns using self drilling/self tapping screws complete. Including transportation charges of all materials to worksite, all labour charges, minor tools, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. Ridge plain (500 - 600 mm). |
| 13 | Wall painting one or more coats on old work with plastic emulsion paint of approved brand and manufacture to give an even shade, including cost of paint, scaffolding arrangements, all other materials, labour charges, transportation charges of all materials to work site and cost of minor tools, LWC, GST, etc.,complete. The rate is inclusive of consumable items and GST. |
| 14 | Painting two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade, including cost of paint, brush, all other materials, scaffolding charges, all labour charges, transportation of all materials to work site and minor tools, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. |
| 15 | Earth work in excavation over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposed earth to the levelled and neatly dressed. All kinds of soil, transportation charges of all materials to worksite, all labour charges, minor tools, LWC, GST, etc., complete. The rate is inclusive of all consumable items and GST. |
| 16 | Providing and laying pulverised stone sand filling below the column foundation,plinth beam and floor etc, including cost of pulverised stone sand from the approved quarry at Diglipur, watering, ramming, consolidation, including cost of minor tools, LWC, GST, etc. complete. The rate is inclusive of all consumable items and GST. |
| 17 | Providing and laying cement concrete 1:3:6 (one cement, three pulverized stone sand and six stone metal of 30-40mm size) below footing, plinth beam as directed by the EIC, screening & washing of both the aggregates, mixing, placing, curing. Including cost of cement OPC 43, nominal centering & shuttering charges, cost of pulverized stone sand & stone metal from local quarry , GST, labour welfare cess, LWC, GST, etc. complete. |
| 18 | Providing and laying RCC 1:1.5:3 (1 cement, 1.5 Pulveraised stone sand & 3 stone chips of size 20 mm grade) in all RCC works as directed by the EIC, excluding cost of fabrication charges which will be paid seperately, but including cost of stone aggregates and Pulveraised stone sand from local quarry, cost cement OPC 43, nominal centering & shuttering charges, LWC, GST, etc, complete. |
| 19 | Providing form work including centering and shuttering so as to give a rough finish, shuttering and proping etc. (height of propping and centering below supporting floor to ceiling not exceeding 4m) and removal of the same in situ reinforcement cement concrete and plain concrete work using standard hard wood including cost of timber, all labour charges, nails, cost of minor tools, LWC, GST, etc. complete. |
| 20 | Fabrication and fixing of reinforcement for all R.C.C works including cost of steel Fe 500 grade ISI and Sail marked steel, binding wire, all labour charges, transportation charges of all materials to work site, cost of minor tools, LWC, GST, etc. complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender