Tender For Special Repair To Water Supply Installation Including Bore Wells, Lt Panel Earthing And Connected Items In Zone-Ii Area Under Age E/M Of Ge Jaipur
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
21 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Water Supply Installation Including Bore Wells, Lt Panel Earthing And Connected Items In Zone-Ii Area Under Age E/M Of Ge Jaipur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ 82568/E8 BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE JAIPUR Name of Work: SPECIAL REPAIR TO WATER SUPPLY INSTALLATION INCLUDING BORE WELLS, LT PANEL EARTHING AND CONNECTED ITEMS IN ZONE-II AREA UNDER AGE E/M OF GE JAIPUR CA NO: CWE/JPR- OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # NUMBER # SNo Item Description Item Code / Make Qty Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency Rate in Figure Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes Rate in Words Total Amount |
| 2 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft / loose soil including trimming of tree roots in trenches complete all as specified and directed. |
| 3 | Returning, filling, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified and directed. |
| 4 | Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed. |
| 5 | Supply & fixing framed work for support structure such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework, chamber cover including welding as required with locking arrangement and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 6 | Supply and fixing wire netting of size 12 mm of stainless steel wire 1.40 mm dia fixed with tinned tacks of wire staples complete all as specified and directed. |
| 7 | M&L for Earthing complete with Galvanized steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground (earth pit not less than 2.25metres deep below ground level) with top edge of the plate nopt less than 1.5 meters below normal ground level connected to and including galvanized earth lead wire 4.0mm dia, by means of nuts, bolts, check nuts and washers of galvanized iron including 15mm bore GI pipe, medium grade up to 7.5metres long all as shown in electrical plate No 5 of MES SSR Part I, and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, precast RCC slab 50mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM, (Weight not less than 4Kg per Sqm) with cast iron frame, funnel with wire mesh, GI watering pipe 20mm dia medium grade complete all as specified and directed. |
| 8 | M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanized iron or steel wire complete all as specified and directed. |
| 9 | Taking out of old existing unserviceable GI protection pipe of dia 15 mm galvanized iron with all fittings complete all as specified and directed. |
| 10 | Supply & fixing Tubes 15 mm dia 'light grade', galvanized, with all fitting laid in trenches for protection of earth lead wire complete all as specified and directed. |
| 11 | M&L for Danger notice plate of 1.6mm thick mild steel sheet, vitreous enameled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and directed. |
| 12 | M & L in repairs cubical Outdoor type weather proof LT panel board front opening hinged typed, double door with locking arrangement, made out of 3.15 mm thick CRCA sheet steel factory fabricated with powder coating with heat shrinkable PVC sleeves with colour code RYBN placed on insulators. The panel board shall be mounted 60 cm above ground level on a form work made out of MS channel of size 75 x 40 cm grouted on PCC Platform. The sides of the form work shall be covered with 3.15 mm thick MS sheet and complete with necessary excavation PCC foundation, suitable cable glands for cable entry etc. The panel board shall be suitable for housed starter MUG 20 or equivalent with the following items:- (For Bore well pump house)(i) 4 Pole MCCB 63 Amp with rupturing capacity 30 KA (Main Incoming)-1 NOS (ii)Volt meter 0-500 volts with selector switch(iii)Amp meter 0-300 Amp with selector switch (iv)Phase indictor lamps LED type set of three (RYB) - 01 Set |
| 13 | S & F Decrin dosing pump model 96NGQ51 High pressure single head gear Motored with adjustable dosing pump of SpecificationAdjustable High Pressure - 0 to 100 PSIPower - 240 V, 50 HzHP - 1/30 fractionalOut put - 2 U.S. GPD to 40 U.S. GPDALTOCH DOSING SYSTEM (MODEL ADS - I) consisting of min 100 liter PE / FRP tank with PE / FRP Lid & level gauge along with agitator with shaft & blade in plastic, mounted on tank with Accessories i.e lead tubing, connecting nuts, single phase motor 0.5 to 1 HP, dosing pump, injection check valve, clay weight, ferrules and suitable length PVC pipe for connection as per site requirement complete all as specified and directed. Make-Declibac or equivalent make as per approved makes. |
| 14 | M& L for repairing the rolling shutter of E/M installations including main replacement of rolling GI pipe up to 50 mm dia and minor parts like spring, nut, bolts etc complete all as specified and directed. |
| 15 | M&L Earthing complete as per electrical plate No 5 of MES SSR Part I with galvanized steel plate earth electrode 60 cm x 60 cm x 6.0mm, buried directly vertically in ground in a pit of depth not less than 2.5 meters below ground level with the top edge of earth plate at a depth not less than 1.8m below normal ground level connected to and including galvanized iron or steel earth strip 32X6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel. Earthing strip protected by galvanized iron or steel pipe 50mm bore light grade and connected to continuous earth wire on pole/ test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be inclusive of excavation and earth work in any type of soil, charcoal, salt, funnel , PCC pit and RCC cover complete all as specified & directed. Note 1- following items deemed to be included in quoted rate (a) Earth electrode. (b) Main earthing strip with protection pipe from earth electrode to test point and further to equipment to be earthed upto 7.5 meter. (c) Material and labour for connecting earth electrode and earthing lead as specified. (d) Adequate quantity of charcoal dust and common salt as per direction. (e) All labour involved including testing of earth net work. (f) Excavation and earth work or drilling hole for electrode. (g) P.C.C. pit and C.I. cover. (h) Funnel with watering pipe, wire mesh and copper lugs etc. as specified. (j) G.I. protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering.Note 2 - On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost. |
| 16 | Taking out of old existing unserviceable earthing lead of 32 x 6 mm size of galvanized iron strip or steel strip complete all as specified and directed. |
| 17 | M&L for Earth continuity conductor or main earthing lead of size 32x6mm GI strip fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. complete all as specified and directed. |
| 18 | Taking out of old existing unserviceable GI protection pipe of dia 40 mm galvanized iron with all fittings complete all as specified and directed. |
| 19 | Supply & fixing Tubes 40 mm dia 'light grade', galvanized, with all fitting laid in trenches for protection of GI strip complete all as specified and directed. |
| 20 | M&L for taking out old/existing earthing pit by removal of unserviceable funnel and cover of earthing complete all as specified and directed. |
| 21 | M&L for Making earthing pit as per electrical plate No.2 with wire mesh, CI cover,Frame,funnel including necessary PCC work all as directed by EIC with testing complete all as specified and directed. |
| 22 | Taking out/down old unsv GI water mains 50 mm bore with all fittings of following size from trenches, under floor or road complete all as specified and directed. |
| 23 | Description all as per Item No 21.00 above but 25 mm bore |
| 24 | Description all as per Item No 21.00 above but 20 mm bore |
| 25 | Description all as per Item No 21.00 above but 15 mm bore |
| 26 | M&L for galvanized mild steel tubes \\"medium grade \\" (ISI marked) 50 mm dia with all necessary fitting (ISI marked) of following size and fixed complete to walls and ceilings or laid in floors/trenches and under road, complete all as specified and directed. |
| 27 | Description all as per Item No 25.00 above but 25 mm dia. |
| 28 | Description all as per Item No 25.00 above but 20 mm dia. |
| 29 | Description all as per Item No 25.00 above but 15 mm dia. |
| 30 | Construction to brick masonry valve pit/ chamber of under mentioned size 900 x 600 x 1000mm for 80 & 100 mm dia Sluice / Reflex valve. and including necessary excavation and earth work, PCC, Plaster in CM 1:6 on inside and out side (above ground ), angle iron frame 40x40x6mm size including fabrication work, hold fast, MS sheet cover 3mm thick, duly painted with one coat of black bituminous paint of approved quality, handle and including provn of 40mm dia Godrej (freedom) lock complete all as specified and directed |
| 31 | Description all as per Item No 29.00 above but 1050 x 750 x 1000mm for 150 & 200 mm dia Sluice / Reflex valve. |
| 32 | S& F sluice valves, class PN 1.6 of 250 mm size with cast iron body with brass spindle, non rising type and cast iron wheel head, both ends flanged, complete with neoprene rubber gasket ,jointing material and inch nuts/bolts/washer of suitable size etc including taking out of old U/s valve complete all as specified and directed. |
| 33 | S& F sluice valves, class PN 1.6 of 150 mm size with cast iron body with brass spindle, non rising type and cast iron wheel head, both ends flanged, complete with neoprene rubber gasket ,jointing material and inch nuts/bolts/washer of suitable size etc including taking out of old U/s valve complete all as specified and directed. |
| 34 | S& F sluice valves, class PN 1.6 of 100 mm size with cast iron body with brass spindle, non rising type and cast iron wheel head, both ends flanged, complete with neoprene rubber gasket ,jointing material and inch nuts/bolts/washer of suitable size etc including taking out of old U/s valve complete all as specified and directed. |
| 35 | Taking out old unserviceable CI non return valve & supply, fixing, testing & commissioning cast iron non return valve 80 mm bore including necessary jointing material like nuts, bolts, washers of suitable size rubber gasket complete all as specified and directed. |
| 36 | Description all as per Item No 34.00 above but 100 mm bore |
| 37 | Description all as per Item No 34.00 above but 150 mm bore |
| 38 | Material and labour for OHT vent cover with wire net 12 mm of galvanized steel wire 1.40mm dia with iron support bar( 4 nos one side) in MS steel frame 3.14 mm thick duly painted 2 coat, one side openable locking arrangement and fixed with nut bolt on top of OHT at different locations of Zone II complete all as specified and directed. |
| 39 | Material and labour for writing letters or figures (Block ,roman, Italic) n exc 30 Cm height, before writing painter will scrub/clean the floor/wall as per requirement/ dimension and double coat a base paint complete all as specified and directed. |
| 40 | M&L disconnection of pipeline from existing header / washout /inlet /outlet /overflow pipe along Over head tank structure or suspended in air/ wall or in PCC foundation of tank for addition and alteration of 80 to 600 mm dia CI/DI/MS pipe dia by cutting /unscrewing and reconnecting the same to new pipeline or existing pipeline including cutting of existing pipe /making threading/ finishing /replacement of U/S fittings, inserting new CI/DI fittings/Duck foot bend in PCC, rubber gasket, saddle piece, suitable size MS flanges as per requirement, nuts, bolts with washer etc in pipeline necessary excavation , earth work and PCC for foundation of header as required or as specified by engineer in chargeNote : - (i)The fittings and pipeline will be measured and paid separately. (ii) cost of Earth work deemed to be included in quoted rate. (iii) Cost of PCC for duck foot bend, header deemed to be included in quoted rate |
| 41 | Taking up or down old unsv/Serviceable CI/DI/MS pipelines of size 80 to 150 mm dia and connections from walls /from overhand tanks or road/trenches , complete all as specified and directed. |
| 42 | Taking up or down old unsv/Serviceable CI/DI/MS pipelines of size 200 to 400 mm dia and connections from walls /from overhand tanks or road/trenches , complete all as specified and directed. |
| 43 | Taking up or down old unsv/Serviceable CI/DI/MS pipelines of size 450 to 500mm dia and connections from walls /from overhand tanks or road/trenches , complete all as specified and directed. |
| 44 | Supply and fixing in replacement seamless MS pipe 500 to 600 mm bore, wall thickness min 6.0 mm, centrifugally cast, class 'B' , (ISI marked) with necessary fitting /tee/bend complete all as specified and directed. |
| 45 | Supply and fixing in replacement seamless MS pipe 300 to 400 mm bore, wall thickness min 6.0 mm, centrifugally cast, class 'C' , (ISI marked) with necessary fitting /tee/bend complete all as specified and directed. |
| 46 | Supply and fixing in replacement seamless MS pipe 200 to 250 mm bore, wall thickness min 6.0 mm, centrifugally cast, class 'C' , (ISI marked) with necessary fitting /tee/bend complete all as specified and directed. |
| 47 | Supply and fixing in replacement seamless MS pipe 100 to 150 mm bore, wall thickness min 6.0 mm, centrifugally cast, class 'C' , (ISI marked) with necessary fitting /tee/bend complete all as specified and as directed. |
| 48 | Supply and fixing in replacement seamless MS pipe 80 mm bore, wall thickness min 5.0 mm, centrifugally cast, class 'C' , (ISI marked) with necessary fitting /tee/bend complete all as specified and as directed |
| 49 | Material and labour for cutting of bituminous road or any type of floor for laying of pipe not exceeding 1.5 mtr deep including refilling with material and watering well ramming/compacting and making good with 10 cm thick PCC 1:2:4 type B-1, complete all as specified and directed. |
| 50 | S&F in repair of 80 mm bore column pipe both side flanged GI Medium grade ISI marked ( Each of 3 m length) including taking out old corroded column pipe both side flanged complete all as specified and directed. |
| 51 | Description all as per Item No 49.00 above but 50 mm bore |
| 52 | Supply and fixing jointing kit for submersible cable of 1100 volts grade of 4/6/10 sqmm 3 core , complete all as specified and directed. |
| 53 | Supply only submersible copper cable PVC insulated over all sheathed flat ISI marked of 1100 volts grade of 6 sqmm 3 core. |
| 54 | Supply only submersible copper cable PVC insulated over all sheathed flat ISI marked of 1100 volts grade of 4 sqmm 3 core complete all as specified and directed. |
| 55 | Supply and fixing in repair of fully automatic star delta starter MUG 20 suitable 20 HP Capacity complete all as specified and directed. Make- L&T Cat part No SS-95975 or equivalent as per approved makes. |
| 56 | S&F in repair submersible pump set with motor of Capacity 10 HP, 3 phase, 230/415 volts, 50Hz, head 120-150 mtr, discharge 300-400 LPM,AC supply including testing and commissioning. Complete as directed and specified by Engineer-in-charge. Make :- KSB or equivalent as approved by GE. |
| 57 | S&F in repair submersible pump set with motor of Capacity 12.5 HP, 3 phase, 230/415 volts, 50Hz, head 120-150 mtr, discharge 3000-400 LPM, AC supply including testing and commissioning complete as directed and specified.Make :- KSB or equivalent as per approved makes. |
| 58 | Supply and fixing MS nuts, bolts with washer of 5/8 inch dia 4 inch long complete all as specified and directed. |
| 59 | M&L for development of tube well with manually cleaning of borewell through necessary arrangement for indoor and outdoor borewells at different location of Jaipur Mil Stn complete all as specified and directed. |
| 60 | M&L for Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water complete all as specified and directed. |
| 61 | M & L Taking out / lifting out of submersible pump set of Capacity 10 HP to12.5 HP, 3 phase,415 volts, 50Hz, AC supply along with column pipe of any size from the bore well after disconnecting electric connection, dismantling of pump and motor for repairing/ replacing defective parts such as impeller, shaft, bush, rubber gaskit,bearing ,oiling, greasing. winding as required and re-assembling and testing including replacing worn out nuts, bolts, washers complete and lowering the same after repairing and making electrical and delivery pipe connections complete all as specified and directed. |
| 62 | M & L Taking including lifting of out submersible pump set of Capacity 3 HP to 7.5 HP, 3 phase, 415 volts, 50Hz, AC supply along with column pipe of any size from the bore well after disconnecting electric connection, dismantling of pump and motor for repairing/ replacing defective parts such as impeller, shaft, bush, rubber gaskit,bearing , oiling, greasing, winding as required and re-assembling and testing including replacing worn out nuts, bolts, washers complete and lowering the same after repairing and making electrical and delivery pipe connections complete all as specified and directed. |
| 63 | Supply, fixing, commissioning and testing digital water level indicator with five stage magnetic level 4 nos Sensing probe unit made of stainless steel (SS-304) of minimum 16 mm dia epoxy sealed with actuated by float the move on the probe stem with the level of water in tank reading shown in LED digital panel with 3 nos display panel and 5 nos high intensity led water level light from 0%,25%,50%,75% & 100% of water level indicator should be complete with alarm on low and high water level (both visual and audio) with by pass facility for audio alarm with inbuilt vsat satellite controlled transmitter to transmit 4 level water level data to 4 nos aneroid mobile phone via aneroid mobile phone APP provided by the manufacture to monitor Water level of 4 nos OHT/UG sump in mimic graphic format with voice alert of water level via ringer tone based water level data communicationand Non internet and non SMS based data communication to monitor water level of 4 nos OHT/UG Sump ,including all fittings arrangement such as 1.5 sqmm 2 to 5 core pvc insulated and copper armoured cable with heavy duty pvc saddle 60 cm apart, connection from probe unit to panel and DB to panel as per manufacture’s instructions complete all as specified and as directedMake:- Active controls / Rawaco / century 21st / Unison engg enterprises / alphatech / sinetrac or Equivalent as per approved makes. |
| 64 | Schedule of Credit Total in Figures 0.0 0.0 -137040.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only 0.0 Quoted Rate in Words INR Minus One Lakh Thirty Seven Thousand &Forty Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender