Tender For Special Repairs To Bldg No P-55 (04 X Jco Qtrs) Of Hq Sqn 58 Armd Bde At New Mil Stn Kapurthala Under Ge Kapurthala
Tender Value
29.05 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
7 days left
EMD
58100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No P-55 (04 X Jco Qtrs) Of Hq Sqn 58 Armd Bde At New Mil Stn Kapurthala Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repairs to Bldg No P-55 (04 x JCO Qtrs) of HQ Sqn 58 Armd Bde at New Mil Stn Kapurthala under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises. |
| 3 | M&L for glazed ceramic coloured tiles in vertical surfaces 450X300X7mm thick over 10 mm thick rendering in cement mortar (1:4) as in vertical surfaces such as in dado/skirting including set and jointed neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. |
| 4 | Demolition of brick/block masonry built in cement mortar including all quoins, arches, pillars etc; and clearing off the premises complete all as specified and directed. |
| 5 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 6 | Taking down cement plaster on brick work or concrete surfaces incl racking out joints all as specified. |
| 7 | M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 8 | M&L for 15mm thick rendering in cement mortar 1:4 on brick work or concrete surfaces with water proofing compound finished even and smooth etc; complete all as specified and directed. |
| 9 | M&L for 5mm thick rendering in cement mortar 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in ceiling etc; complete all as specified and directed. |
| 10 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distermper complete all as specified and directed. |
| 11 | M&L preparation of plastered and unplastered surfaces of wall and applying two coats of oil bound distemper over 3mm wall care putty complete all as spedifed and directed.Note:- OBD to be done by Roller. |
| 12 | M&L for applying two coats of exterior emulsion paint on plastered or unplastered wall surface including preparation of surfaces, complete all as specified and as directed. |
| 13 | M&L for applying two coats of exterior emulsion paint on old plastered or unplastered wall surface including preparation of surfaces, complete all as specified and as directed. |
| 14 | Demolition of cement concrete of any description and in any position not otherwise specially provided for. |
| 15 | M&L for water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WC's etc; shall be as under :- |
| 16 | (i) Application of Two component acrylic modified cementitious coating.(a) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement litance, existing coatings and achieve a gripping profile that is clean, dry and free from litanceand any other form of surface contamination. the installation instructions in manufacturer's published literature should be strictly compiled with, including but not limited to the following:-(b) Chipping out any visible cracks in 'V- Groove' pattern as applicable. Special attention on this part cleaning of cracks and then filling those cracks with SIKA latex SBR 100 putyy/ Dr Fixit 302 SBR latex/ perma latex SBR / FOSROC Nitibond SBR latex/ Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush and vaccum pressure if required.(c) Dampen all surfaces immediately ahead of application of Acrylic modified cemetitious coating of Sika Top seal - 107/brush Bond FOSROC/ Dr Fixit/ STP/ CICO.(d) While the surface is still damp from saturation (SSD), apply one coat of acrylic modified cementitious coating of Sika Top seal- 107/ Brush bond FOSROC/ Dr fixit / STP/ CICO of viscosity as per manufacturer's instructions.(e) Apply glass fabric sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP while the first coat is wet. |
| 17 | (f) Once touch dry apply second coat of Acrylic modified cementitious coating of Sika Top Seal- 107/ Brush bond FOSROC/ Dr FiXit/ STP/ CICO of viscosity as per manufacturer's instructions on the entire area.(g) Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat.(h) The waterproofing coating should be taken to a height minimu 300mm above the finished floor level on the vertical surface.(j) It is essential to cure acrylic modified cementitious coating immediately after application ( minimum 6-8 hrs drying) for a minimum of 3 to 54 days to ensure full cement hydration and to minimize cracking.(k) A protection plaster ( 12-15 mm thick) in cement mortar 1:3 admixed with appropriate integral water proofing compound has to be applied on the walls.(l) Providing and applying a protection screed of 50 mm thick 1:4 cement sand mortar admixed with Sika plastocrtete over the applied water proofing coating on horizontal surfaces.Admixutre for item( k&l) above : Sika Plastocrete Plus/ FOSROC/ Dr Fixit/ STP/ CICO confirming to IS 2645(m) All the corners and joints should be pretreated with elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/FOSROC/Dr Fixit/STP. |
| 18 | (n) The membrane has to be protected in accordance with the manufacturer's recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer's recommendations.(o) Waterproofing treatment has to be carried out through applicators authorised.(ii) All the joints of pipesand traps within sunken portion shall be selaed properly by Epoxy sealant.(iii) All CI traps in sunken slabs to be enclosed with PCC 1:1.5:3 (min 15cm) all - round.(iv) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm stone aggregate) complete all as specified.(v) Providing drainage spout pipe GI 40mm dia bore light grade upto outside of outer wall ( Approx 450mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and directed.(vi) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm grade stone aggregate as in flooring for laying floor finish all as specified.Note:- Item (iv), (v) & (vi) above shall be measured and paid seprately. |
| 19 | M&L for providing GI pipe heavy class of dia 40mm all as specified and directed. |
| 20 | M&L for PCC (1:5:10) type E2 using 40mm graded aggregate thick as in sub base complete all as specified and directed. |
| 21 | M&L for PCC type B-0 (1:2:4) (12.5mm stone graded aggregate), 40 mm thick as for receiving top finishing layer of ceramic tiles for sunken portion finished even and smooth etc; complete all as specified and directed. |
| 22 | M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 23 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete as directed. |
| 24 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 25 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc; binding with mild steel binding steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 26 | M&L for RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc; complete all as specified and directed. |
| 27 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each. |
| 28 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n.exc 4sqm each. |
| 29 | S&F of solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed. |
| 30 | S&F of factory made solid panel PVC moulded door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. MS frame shall covered with heat moulded plain colour PVC \\"C\\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and directed. |
| 31 | S&F of alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed. |
| 32 | S&F of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm complete all as specified and directed. |
| 33 | S&F of extruded aluminium alloys handles frabicated type anodized of size 150mm long complete all as specified and directed. |
| 34 | S&F of aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed. |
| 35 | M&L for ventilators fixed type of 50x20mm hollow pipe of 1mm thick with glazing bars etc; complete all as specified and directed. |
| 36 | S&F of 4.00mm thick figured glass, pinhead type in squares n.exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed. |
| 37 | S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screws with bolts incl leaping wooden complete all as specified and directed. |
| 38 | S&F in repairs of size 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as specified and directed. |
| 39 | Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls complete all as directed. |
| 40 | S&F of CPVC pipe outer dia 16mm, SDR 11 & plain 15mm, SDR 11 fittings complete all as specified and directed. |
| 41 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed. |
| 42 | S&F of CPVC pipe outer dia 20mm, SDR 11 & plain, SDR 11 SDR 11 fittings complete all as specified and directed. |
| 43 | S&F in repairs 15 mm bore CP bib taps cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 44 | S&F in repairs 15mm dia stop valve/angle valve, CP cast copper alloy with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 45 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) \\"with plastic closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging divice including flusing cistern and flush pipe in repairs complete all as specified and directed. |
| 46 | S&F of 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 47 | S&F of 20mm dia aluminium chromium plated tubular towel rails, 'D' type, 60cm long between flanges, complete all as specified and directed. |
| 48 | S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing with solvent cement complete all as specified and directed. |
| 49 | S&F in repairs vitreous china ware wash basin white, flat back size 550 X 400mm including CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. |
| 50 | S&F in repairs shower rose size 100mm with CP arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed. |
| 51 | Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs as directed. |
| 52 | Demolition of mud in roof any thickness including plastering & leeping removed as directed. |
| 53 | M&L for rendering 10mm thick cement mortar 1:3 on concrete surface even and smooth with waterproofing compound as directed. |
| 54 | Supply only integral water proofing compound. |
| 55 | M&L for preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) complete all as specified and directed. |
| 56 | M&L for 40 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab complete all complete all as specified and as directed. |
| 57 | M&L for 40mm thick brick tiles laid on 15mm screed bed in cement mortar 1:3 with jointing and pointing in cement mortar (1:3) mixed with 5% crude oil by weight of complete all as specified and directed. |
| 58 | - ditto - all as per item No 53 above but except brick tiles including removing mortar from bricks complete all as specified and directed. |
| 59 | M&L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs, rounded or chamfered edges complete all as specified and directed. |
| 60 | Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in cement mortar (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc; and cutting chases for concealed water tubing or etc; and making good, |
| 61 | Dismantling of cast iron pipe any diameter jointed with cement mortar or lead incl all fittings from wall or floors complete all as specified and directed. |
| 62 | S&F of 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 63 | S&F of 75 mm PVC (SWR) pipes in repair single socketed in any length laid in floor complete all as directed. |
| 64 | S&F of 75 mm PVC (SWR) bend complete all as directed. |
| 65 | S&F of 75 PVC (SWR) junction single,(single T) equal or unequal complete all as directed. |
| 66 | S&F of 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed. |
| 67 | S&F of 110 mm PVC (SWR) bend with complete all as directed. |
| 68 | S&F of 110 PVC (SWR) junction single, (single T) equal or unequal complete all as directed. |
| 69 | S&F of 110mm PVC vent cowl. |
| 70 | Dismantiling water tank PVC 500 ltrs and removing from site |
| 71 | S&F in rotational moulded polythelene water storage tanks 500ltrs capacity with threaded lid white colour hoisted and fixed in postion incl fittings and complete all as specified and directed. |
| 72 | S&F in repairs gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed complete all as specified and directed. |
| 73 | S&F of 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed. |
| 74 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 mtr above the starting point. |
| 75 | Returning filling in including spreading leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil. |
| 76 | M&L for vitrified ceramic coloured tiles 10 mm thick light shade (square/rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed. |
| 77 | M&L for vitrified ceramic tiles light shade tiles 10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqm in vertical surface such as skirting dados and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 10 mm thick rendering in cement mortar (1:4) complete all as specified and directed. |
| 78 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in cement mortar (1:6) complete all as specified and directed. |
| 79 | M&L for machine cut kota stone for flooring 20-25mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in cement mortar 1:6 as specified and directed. |
| 80 | M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in cement mortar 1:6 as specified and directed. |
| 81 | M&L for granite 16 to 18mm thick (of any type) work (table rubbed and polished)in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admix ture of pigment to match with shade of granite incl making hole for gas pipe complete all as specified and directed. |
| 82 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 83 | M&L for preparation of old plastered surfaces of ceiling and applying two coats of whitewash on ceilingcomplete all as specified and directed. |
| 84 | S&F of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed. |
| 85 | S&F of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc; complete, as specified, size of frame 105 x 60mm filling hollow frame complete all as specified and directed. |
| 86 | M&L for PCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed. |
| 87 | S&F of factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed. |
| 88 | S&F of factory made 2nd class hard wood plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 89 | S&F of PVC cupboard of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick plain/printed/prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed. |
| 90 | S&F of factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel fitted with necessary arrangement complete all as specified and as directed. |
| 91 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 92 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primercomplete all as specified and directed. |
| 93 | M&L for providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Note :- The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured lor payment purpose. |
| 94 | S&F of 5.50mm thick sheet glass, ordinary quality in squares n.exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed. |
| 95 | S&F for 15mm brass,CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and direcetd. |
| 96 | S&F of kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 97 | S&F of utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws as specified and directed. |
| 98 | S&F of soap dish chromium plated heavy duty complete all as specified and directed. |
| 99 | S&F in repair 25mm MS curtain rail powder coated with fixing brackets, stops, roller etc as specified and directed. |
| 100 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushioning complete all as specified. |
| 101 | M&L for 25mm fine sand filling under floor or in foundations in layers including watering and consolidation complete all as specified. |
| 102 | M&L for PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base complete all as specified and directed. |
| 103 | Excavation by mechanical means (hydraulic excavator) means over areas ( exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including getting out and didposal of excavtaed earth lead upto 1.5m, as directed. |
| 104 | M&L for cutting into existing manhole for connecting new drains and making good for 200 mm bore pipe and rendering, cutting out existing benching and forming branch (1/2 or 3/4 section) channel in plain cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregates, surface finished even and smooth and reforming benching as reqd complete all as specified and directed. |
| 105 | M&L for RCC 200mm bore class NP2 laid and jointed complete with collars laid in trenches and tested complete all as specified and directed. |
| 106 | S&F of kitchen sink mixer 15 mm Brass CP swan neck for mixing hot and cold water with all necessary fittings screwed down for iron pipe and fixed complete all as specified and directed. |
| 107 | M&L for concrete bed to drain pipes 200mm bore in cement concrete (1:3:6) type C-2 (using 20mm graded stone aggregate) including packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and directed. |
| 108 | S&F of wall mixer 15 mm brass CP for mixing hot and cold water with all necessary fittings , screwed down for iron pipe and fixed complete all as specified and directed. |
| 109 | M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed. |
| 110 | S&F in repair softwood 2nd class clean swan with butt joints 20mm thick board in shelves, partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work complete all as specified and directed. |
| 111 | M&L for preparation of old plastered or unplastered decorated surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint and including 2mm thick wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed.Note :- Exterior emulsion paint to be done by roller. |
| 112 | Racking out joints and pointing to brick work in wall or to brick on edge built in cement mortar (1:3) etc; complete all as specified and directed. |
| 113 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish complete all as specified and directed |
| 114 | S&F of continuous (piano) hinges, mild steel, bright finish or eletro galvanised complete all as specified and directed. |
| 115 | S&F of magnetic catcher for shutter of approved pattern fitted with suitable screw complete all as specified and directed. |
| 116 | M&L for providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc; complete all as specified and directed. |
| 117 | S&F of 5mm thick 18mm wide wooden fillet for beading purpose of cupboard shutter including necessary nails screws etc; complete all as specified and directed. |
| 118 | S&F of aluminium handles,100mm long cast type, anodised complete all as specifed and directed. |
| 119 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. |
| 120 | M&L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FRLS) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC (FRLS) insulated copper conductor common earth and connecting to earth dolly for :- |
| 121 | One light point controlled by one 1-way switch complete all as specified and directed. |
| 122 | One ceiling / exhaust fan point controlled by one switch complete all as specified and directed. |
| 123 | One three pin socket out let 5 amps on independent board complete all as specified and directed. |
| 124 | One three pin socket out let 5 amps on Same board complete all as specified and directed. |
| 125 | One call bell point controlled by one bell switch complete all as specified and directed. |
| 126 | One 2 way light point controlled by two 2 way switches complete all as specified and directed. |
| 127 | - ditto - all as per item No 116 above but with 2.5 Sqmm (Nominal Area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin socket out let 15 amps on independent board complete all as specified and directed. |
| 128 | S&F of switch piano type 6A 240 volts complete all as specified and directed. |
| 129 | S&F of switch piano type 15A 240 volts complete all as specified and directed. |
| 130 | S&F of socket outlet 2 in 1, 3 pin, 5/6 amp with shutters complete all as specified and directed. |
| 131 | S&F of socket outlet 2 in 1, 3 pin, 5 and 15 amp with shutters complete. |
| 132 | S&F of switch piano 2 way 6 Amps complete all as specified and directed. |
| 133 | S&F of bell push switch piano type 5 Amps SP complete all as specified and directed. |
| 134 | S&F of ceiling rose surface type bakelite 65 x 50 mm with three terminals complete all as specified and directed. |
| 135 | Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface. |
| 136 | S&F of LED light fitting 1x20 watt, 220 volt AC box type rechargeable with min backup 2 hrs with driver, holders,including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 137 | S&F in replacement of lamp holder, PVC/Polycarbonate angular type with LED lamp base B-22 (holder type) 7 watts complete all as specified and directed. |
| 138 | S&F of call bell, ding dong AC 230 volts, single phase complete all as specified and directed. |
| 139 | S&F of LED light fitting 1x9w/1X10w bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 140 | S&F of LED street light fitting 35 watt 230 volts AC outdoor type, Lumens output not less than 110 Lumens/watt with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with GI bracket of dia 40mm light grade of suitable size with complete all as specified and directed. |
| 141 | S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE with brushless direct current motor (BLDC) with copper wound complete all as specified and directed.Note:- (1) Rate for taking down ceiling fan & trasportaion to deposit at E/M storeyard to ceiling fan deemed to be incuded in this rate. |
| 142 | S&F of metallic heavy duty exhaust fan copper wound with double ball bearing continuous duty including louvers, fixing arrangements & making hole of suitable size if necessory for 300 mm sweep, 900 rpm, 230V complete all as specified and directed. |
| 143 | S&F of exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm, with fixing arrangements & making hole of suitable size if necessory complete all as specified and directed. |
| 144 | S&F of sheet steel factory made, powder coated MCB DB with bus bar 200Amps. Neutral link, earth bar, double door SPN 8 way 230 volts complete all as specified and directed. |
| 145 | S&F of single pole and neutral enclosure with a two pin and earth with single pole MCB 20 Amp complete all as specified and directed. |
| 146 | S&F of MCB Single pole 240 volts 6-32 Amps, 10KA, B-series complete all as specified and directed. |
| 147 | S&F of MCB SPN 240 volts 0- 32 Amps, 10KA, B-series complete all as specified and directed. |
| 148 | M&L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 6 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed. Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads. |
| 149 | S&F of electric water heater, storage type ABS body with metalic inner tank and heating element capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, automatic thermal cut-out and multi function valves, angle iron steel cock, water tap, NRV, 450 mm brass connection pipe etc; complete all as specified and directed. |
| 150 | M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as directed. |
| 151 | Supply, install, testing and commissioning of LT panel size 1000 mm x 900 mm x 300 mm enclosures cubical weather and vermin proof totally enclosed made out of 1.6 mm thick CRCA sheet machine pressed of suitable size to operate on 3 phase 4 wire system 415 Volts, 50HZ double door with front openable and PVC acrulic glass cover suitable size for checking of meter reading without opening door with locking arrangement incl inner shutters for mounting switch gear etc, suitable arrangement for fixing of electrical meter and SPN 40 to 63 Amp including pre wiring from Bus bar to Meter and Meter to MCB SPN (for pre wiring use 6.00 Sqmm Single core copper cable and suitable size of lugs for connecting from Busbar to meter and meter to MCB SPN)including bottom gland plate with sufficient numbers of circular cable entry holes, including prewired complete as per drawing with masonary work for fixing in wall duly powder coated with comprising of the following :-Incoming :-(i) MCB 63 Amps FP, 415 Volt 25 KA adjustable thermal & fixed magnetic setting Ics = 100% = 01 No.(ii) Phase indicating lamp LED type with HRC fuse -1 Set of three.(iii) On/Off indicating lamp on incomer feeder for status of feeder = 02 Nos(iv) Aluminium bus bar 200 Amps capacity with bus bar supports, DMC/SMC insulators of CPRI approved of suitable length insulated heavy heat shrinkable sleeves etc -04 Nos.Out going :- (i) MCB 40 Amp 240 Volt,10 KA, Single pole and neutral - 05 No(ii) Taking down energy meter of any capacity including connection and refixing of old existing single phase electronic energy meter including connection from SPN to meter with 6 Sqmm copper stranded conductor including earth wire complete all as specified and directed. |
| 152 | S&F of GI tubing medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc; laid in trenches for 40 mm size of pipes complete all as specified and directed. |
| 153 | M&L for valve, stop, screwed, supplied and installed complete for size 40 mm dia pipe complete all as specified and directed. |
| 154 | M&L for cutting cast iron/GI pipe up 40/50 mm bore, in position for insertion of new tees of suitable size including jointing materials complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender