Tender For Provision Of Study Hall With Toilet At Sainik School At Kapurthala Under Ge Kapurthala
Tender Value
40.85 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
10 days left
EMD
81700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Study Hall With Toilet At Sainik School At Kapurthala Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Provision of study hall with toilet at sainik school at Kapurthala under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed. |
| 3 | Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc; or for shafts, wells, cesspits, manholes, pier holes, etc; n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed. |
| 4 | Excavation in trenches, exc 1.5 m wide and n.exc 3.00 m in depth; for foundation, etc; or for shafts, wells, cesspits, manholes, pier holes, etc; n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed. |
| 5 | M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed. |
| 6 | Form work to sides of concrete fdn footing base of columns and raft beams sides and soffits (if any) of fdn and plinth beams and similar wk vertical or to batter for rough finished surfaces. |
| 7 | Form work to sides of pillars, posts, struts, pier, columns square, rectangular or polygonal rough finished surface of concrete. |
| 8 | Form work to sides and soffits of floor or roof beams, beam haunching, lintel etc rough finished surfaces of concrete flats. |
| 9 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200mm thick (Horizontal or sloping) all as specified and directed. |
| 10 | M&L for RCC M-25 design mix as in fdn, including raft, fooling fdn beams, plinth beams bases for columns and mass concrete. |
| 11 | M&L forRCC M-25 design mix as in plinth beams, roof beam, cantilivers, bressummers, lintel over 1.5m span all as specified and directed. |
| 12 | M&L for RCC M-25 design mix as in columns , pillars, piers, posts and struts etc. |
| 13 | M&L for RCC M-25 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chhajja and in shelves and the like complete all as specified and directed. |
| 14 | M&L for TMT bars (Fe 500),10 mm dia and over in reinforcement cut to length, bent to shape required incl bending spirally cranking, hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, all as specified. |
| 15 | M&L for TMT bars (Fe 500), 5mm dia and over upto including 10mm dia stirrups bending spirally or hooping for columns, hooking ends and binding with mild sleet wire not less than 0.90mm dia complete all as specified and directed. |
| 16 | M&L for old size brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed. |
| 17 | M&L for rendering 15mm thick on fair faces brick surfaces in cement mortar 1:4 finished even and smooth without using extra cement including WPC @ 3% of wt of cement complete all as specified. |
| 18 | M&L for rendering 15mm thick on fair faces brick surfaces in cement mortar 1:6 complete all as specified and directed. |
| 19 | M&L for rendering 10mm thick on fair faces of concrete surfaces surfaces in cement mortar 1:3 as in ceiling finished even and smooth without using extra cement complete all as specified. |
| 20 | M&L for preparation of new plastered surfaces of walls and applying 2mm thick of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed. |
| 21 | M&L applying two coats of exterior emulsion (Apex) paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and as directed. |
| 22 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed. |
| 23 | M&L for hardcore of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface under floor and plingh protection all as specified and directed. |
| 24 | M&L for 100mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in floor over hard core all as specified andm directed. |
| 25 | M&L for 25mm thick plain cement concrete type B-1, 1:2:4 (12.5mm graded aggregate) as in sub base of tile all as specified and directed. |
| 26 | M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection/hard standing finishing the surface even and smooth with out using extra cement |
| 27 | M&L for anti-termite treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed. |
| 28 | M&L for anti-termite treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface all as specified and directed. |
| 29 | M&L for anti-termite treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area all as specified and directed. |
| 30 | M&L for 40mm thick in cement concrete mortar 1:2:4 type B-0, damp proof course to horizontal or vertical surfaces including necessary formwork all as specified and directed. |
| 31 | M& L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m all as specified and directed. |
| 32 | M&L for polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m all as specified and directed. |
| 33 | S&F of factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed. (Glass or wiremesh shall be paid separately) Note:- For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 34 | S&F of 5.50mm thick plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads all as specified. |
| 35 | S&F of stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.40mm and fixed with tinned tacks/screws with bolts including leaping wooden. |
| 36 | M&L for light shade vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in cement mortar 1:6 complete all as specified and directed. |
| 37 | - ditto - all as per item No 35 but in vertical surfaces over 10mm plaster in cement mortar 1:4 complete all as specified and directed. |
| 38 | S&F ofaAnodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 39 | S&F of factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 40 | S&F of factory made uPVC white colour casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-inCharge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 41 | S&F of aluminium (die cast body) door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 42 | Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as spd. |
| 43 | Removal of excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed. |
| 44 | S&F in repairs 15 mm bore CP bib taps fancy type long body cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 45 | S&F of 15mm dia stop cock fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 46 | S&F of 15mm dia fancy type chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionscomplete all as specified and directed. |
| 47 | S&F of gun metal, globe or gate valves with iron wheel head, screwed bnoth ends for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 48 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity, white in colour and PVC flush pipe 32mm dia complete all as specified and directed. |
| 49 | S&F in repairs vitreous china ware wash basin white, flat back size 550 X 400mm with pedestal including 15mm dia swain neck pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed. |
| 50 | S&F of PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 51 | S&F of CP greating round 75/100mm size (minium weight 50 gms) complete all as specified and directed. |
| 52 | S&F of 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor as sewage line complete all as directed. |
| 53 | S&F of 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor as sewage line complete all as directed. |
| 54 | S&F of 75 mm PVC (SWR) bend complete all as directed. |
| 55 | S&F of PVC (SWR)75mm dia vent cowl complete all as specified and directed. |
| 56 | S&F of 110 mm PVC (SWR) bend complete all as directed. |
| 57 | S&F of PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 58 | S&F of 125mm over head shower of chromium plated any colour or fixing with 15mm pipe with 225mm, SS Arm and flange complete all as specified and directed. |
| 59 | S&F of 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 60 | S&F of of 20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 61 | S&F of 16mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 62 | S&F of gun metal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed complete all as specified and directed. |
| 63 | S&F rotational moulded polythelene water storage tanks cylindircal water tank for hoisted and fixed in postion of 1000 ltrs capcity including fittings complete all as specified and directed. |
| 64 | S&F of ball valves 20mm high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 65 | M&L for plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 66 | M&L for sand filing under floors or in foundations including watering and consolidation |
| 67 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 80mm thick ness, M-40 grade with grey cemet and pigment over sand cushioning complete all as specified and directed. |
| 68 | M&L for precast cement concrete block masonary kerb stone with solid block (size 30x20x10 cm) as in edging ,type B1 1:2:4 (20 mm graded aggregate) exc 10 cm in width and setting in mortar 1:4 complete all as specified and directed. |
| 69 | M&L for preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymeric weighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm) and applying two coats of aluminium paint above APP membrane surface, complete all as specified and directed. |
| 70 | M&L for point wiring with 1.5 Sqmm (Nominal area) FRLSH PVC insulated sheathed multi stranded copper conductor, 1100 Volts ISI marked drawn through and including rigid non metalic PVC concealed conduit medium grade ISI marked minimum 20mm size and its accessories complete along with 1.5 sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed, in walls/ ceiling/ roofs with and including 1.2mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall with modular frame and cover of 1 module to 12 module as required at site for mounting modular switches, socket, bell push, fan regulators etc. complete all as specified and directed for the following points :- |
| 71 | One light point controlled by one 1-way switch complete all as specified and directed. |
| 72 | One ceiling fan point controlled by one switch through regulator complete all as specified and directed. |
| 73 | One three pin socket out let 5 amps on independent boardcomplete all as specified and directed. |
| 74 | - ditto - all as per item No. 69 above but with 2.5 Sqmm (Nominal area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for one 3 pin socket out let 15 amps on independent board complete all as specified and directed. |
| 75 | - ditto - all as per item No. 69 above but with 4 Sqmm (Nominal area) FRLS PVC insulated sheathed multi stranded copper conductor, 1100 Volts for but for AC point on independent board complete all as specified and directed. |
| 76 | S&F of switch modular type 6A 240 Volts ccomplete all as specified and directed. |
| 77 | S&F of switch modular type 15A 240 Volts complete all as specified and directed. |
| 78 | S&F of ceiling rose surface type Bakelite 65 x 50 mm with three terminals complete all as specified and directed. |
| 79 | S&F of socket outlet 2 in 1, 3 pin, 5/6 amp modular 2 module type with shutters complete all as specified and directed. |
| 80 | S&F of socket outlet 2 in 1, 3 pin, 5 and 15 amp modular type 2-module with shutters complete all as specified and directed. |
| 81 | S&F of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE with brushless direct current motor (BLDC) with remote controle complete all as specified and directed. |
| 82 | S&F of ceiling suspended type architectural luminaire LED light fitting 1x22/24 watt, 220 volt AC with soft light and glare free illumination decorative box type with driver, hanging arrangement from ceiling to fixtures with chain or as per directed including LED light fittings connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 83 | S&F of LED light fitting 1x20 watt, 220 volt AC box type aluminium housing with driver, holders,including LED tube light connecting up with three core flexible copper conductor of suitable size from ceiling rose complete all as specified and directed. |
| 84 | S&F of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with GI bracket of dia 40mm light grade of suitable size with complete all as specified and directed. |
| 85 | S&F of LED decorative wall lantern Lights/bracket lights 16/20 W 230 V complete with 2 x bulbs holders or integrated warm white LED die-cost aluminium housing with rust free finish complete all as specified and directed.(Make :- Jaquar/Crompton/philips/Havell's/Hallonix) |
| 86 | M&L for sub main wiring with FRLS PVC insulated. 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications with 3 runs of 6 sqmm single core multistranded copper conductor FRLS PVC insulated cable as earth continuity conductor drawn through & including PVC conduit of 20mm dia. size and conduit accessories concealed in wall connecting to common earth dolly all as specified and directed.Note: (i)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (ii) The wiring shall be done in proper colour coding using red, yellow or blue for phase, black for neutral and green for earth leads. |
| 87 | S&F of TPN horizontal type, 4 way, 415 Volts, 50 Hz, indoor type double door sheet metal enclosure IP-54 DB's IK-09 flush mounted with 200 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCB 100 Amps, four pole as incomer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor complete all as specified and directed. |
| 88 | S&F of sheet steel factory made, powder coated MCB DB with bus bar 200Amps.neutral link, earth bar, double door SPN 12 way 230 volts complete all as specified and directed. |
| 89 | S&F of sheet metal enlosure single pole and neutral with two pin socket and earth plug complete with one MCB single pole 240 volts 20 amps complete all as specified and directed. |
| 90 | S&F of MCB Single pole 240 volts 6-32 Amps, 10KA, B-series complete all as specified and directed. |
| 91 | S&F of MCB SPN 240 volts 0- 32 Amps, 10KA, B-Series complete all as specified and directed. |
| 92 | S&F of MCB TPN 240 volts 25- 100 Amps, 16KA, B-series complete all as specified and directed. |
| 93 | M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 4 mm dia GI earth lead wire as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed. |
| 94 | S&F of electric water heater stoarage type steel/ABS body with mettalic inner tank & heating element upto 2KW capacity 25Ltr, BEE 5 Star rated AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces complete with all accessories such as safety valve, thermostate, NRV, steel braided connection piece of 450 mm long complete all as specified and directed. |
| 95 | S&F of exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250 mm complete all as specified and directed. |
| 96 | Supplying & laying of cable XLPE insulated screened PVC bedded,galvanised steel strip or wire armoured,electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core |
| 97 | M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plate using 32x6 mm thick GI earth strip as earth lead moulded and rivetted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead protected in and including 40 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed. |
| 98 | M&L for brick protection using old size sub class ‘B’ bricks, laid flat, dry adjacent to each other laid length wise perpendicular to the axis of cable complete all as specified and directed. |
| 99 | S&F of GI pipes light grade, galvanised, with all fitting; laid in trenches bore of tube being 40 mm. |
| 100 | Supply, install, testing and commissioning of LT Distribution Panel (CPRI type tested) cubicle type IP-65 , Outdoor type confirming to IS-61439 factory fabricated prewired made out of 3.15 mm thick CRCA sheet outer & 2 mm thick CRCA sheet inner of suitable size to accommodate all accessories/ fittings compartmentalized in construction to accommodate the incoming/outgoing MCCB ad TPN bus bars and outgoing feeders. The TPN aluminium bus bars shall be insulated with colour coated heat shrinkable sleeve and shall be mounted on DMC support. The incoming as well as outgoing MCCBs shall have extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC support having provision of termination of incoming and outgoing cables.All extension links/ interconnections shall be colour coated sleeves. The cubicle shall have frame work at bottom of MS channel MC 100 fixed to the top of platform. The plateform of LT Panel shall be pedestal type of suitable width and 600 mm height above ground level and minimum 400 mm below the ground level constructed with bricks (sub class 'B') work duly plastered in CM 1:3 and PCC copping (1:2:4) not less than 50 mm thick over brick pedestal with adequate opening for entry of cable complete as per manufacture recommendation and directed.A detachable gland plate of thickness not less than 3 mm thick should be used at the bottom for entry of armoured cable of adequate size compression glands, the panel shall be painting with powder coated finish with RAL 7032 SIEMENS GRAY structure after seven tank phosphate treatment front & back opening type and fixing 2 Nos danger notice plan with letter figures and conventional skull bones in signal red colour and fixed front & back door to LT Panel with voltage and danger indicated in Hindi and English with double door shutter and shall have louvers and air vent gasket for natural flow of air Neoprene Adhesive type gasket shall be used to make panel vermin proof and comprising of following :- ( LT Panel) |
| 101 | INCOMING : MCCB 4 Pole, 125 Amps ,415 Volt of breaking capacity 35 KA with Ics=100%Icu Adjustable thermal and adjustable magnetic release - 01 Nos.Busbars:- TPN 300A - 01 Sets.Outgoing:- MCB 4 pole 415 V 63 Amps 16 KA, TM release - 04 nosMCB 4 pole 415 V 06-32 Amps 10 KA, TM release - 01 nosVoltmeter (0-500) V digital type with selector switch.-01 No, Astro timer switch with auto ON/Off to street lights including TPN MCB 40AAmpere Meter (0-500) Amperes, 96mm square, digital type, CT connected with suitable CTs and selector switch-)1 No, Phase indicator, LED type each Set |
| 102 | Dismantling of the existing old rusted steel/RCC poles of any type Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender