Tender For Special Repair To Unsv Ci Pipe Line To Di Pipe Line At Md Lines Under Ge Golconda
Tender Value
22.46 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
11 days left
EMD
45000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Unsv Ci Pipe Line To Di Pipe Line At Md Lines Under Ge Golconda
BOQ
| Sl. No. | Item Description |
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8177/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: SPECIAL REPAIR TO UNSV CI PIPE LINE TO DI PIPE LINE AT MD LINES UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc. Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m depth and getting out in soft / loose soil for laying of pipes complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc., 25cm thick each layer in hard/dense soils complete all as specified and as directed. |
| 4 | Removing excavated materials to a distance not exc 50 M and depositing where directed at a level not exc. 1.5 M above the starting point complete all as specified and as directed. |
| 5 | Taking up cast iron water mains 100mm dia (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. |
| 6 | Taking up cast iron water mains 150mm dia (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. |
| 7 | Taking up or down steel tubing and connections, including cleaning for re- fixing or removal to store of size 50mm dia complete all as specified and as directed. |
| 8 | Taking up or down steel tubing and connections, including cleaning for re- fixing or removal to store of size 40mm dia complete all as specified and as directed. |
| 9 | Taking up or down steel tubing and connections, including cleaning for re- fixing or removal to store of size 25mm dia complete all as specified and as directed. |
| 10 | Supply and lay pipe ductile Iron , S/S including specials, Class “K-7”, 100 mm (4”) dia complete all as specified and as directed. |
| 11 | Supply and lay pipe ductile Iron , S/S including specials, Class “K-7”, 150 mm (6”) dia complete all as specified and as directed. |
| 12 | Supply and lay pipe galvanized, “Medium grade”, including fittings 50 mm (2”) dia complete all as specified and as directed. |
| 13 | Supply and lay pipe galvanized, “Medium grade ”, including fittings 40 mm (1.5”) dia complete all as specified and as directed. |
| 14 | Supply and lay pipe galvanized, “Medium grade”, including fittings 25 mm (1”) dia complete all as specified and as directed. |
| 15 | Material & Labour for DI spigot/flanged fittings for spigot/flanged end pipes and for header purpose such as bends any type radius and angle) tapers any type (straight, bend increasing or decreasing double socket flanged etc.), Tee pieces, single branch, 'Y' junction, double branch cross (all socket or socket and spigot or flanged, Collars, caps and plug etc. all as specified and directed up to 200mm bore complete all as specified and as directed. |
| 16 | Supply and fix Cast Iron Sluice valve 150mm bore, with stainless Steel spindle and cast iron body with clamps and check nuts, operating hand wheel, both end flange and drilled conforming to IS 148 46-2000 type PN 1.6, ISI marked including jointing material such as rubber insertion gas kit with suitable bolts, nuts and washers etc., complete all as specified and directed. |
| 17 | Supply and fix Cast Iron Sluice valve 100mm bore, with stainless Steel spindle and cast iron body with clamps and check nuts, operating hand wheel, both end flange and drilled conforming to IS 148 46-2000 type PN 1.6, ISI marked including jointing material such as rubber insertion gas kit with suitable bolts, nuts and washers etc,complete all as specified and directed. |
| 18 | S & F Air release valve of 150 MM dia size to the DI pipeline as that of existing model complete with necessary , balls, nuts,bolts and gasket as per site requirement fixing in position complete including taking out existing complete all as specified and as directed.. |
| 19 | Supply and fix gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 50 mm bore including taking down complete all as specified and directed. |
| 20 | Supply and fix gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 40 mm bore including taking down complete all as specified and directed. |
| 21 | Supply and fix gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 25 mm bore including taking down complete all as specified and directed. |
| 22 | M & L for construction of new valve chamber 90x90x90 cm inner dimensions, brick masonry in cm 1:4 PCC base in 1:3:6 of 7.5 cm thick & plastering 15 cm thick in CM 1:4 in inner side/ coping of all chamber fabrication of Iron frame 40x40x6 mm size angle iron MS cover 3 mm thick with hinges and locking arrangements duly painted excavation, earth work complete all as specified and as directed. |
| 23 | M & L for cutting of road, hard standing of thickness not less than 200mm made of concrete or premix carpet, WBM including making good the road/hard standing with PCC (1:2:4) etc., required to match with the existing surface complete all as specified and as directed. |
| 24 | M&L for cement concrete for thrust blocks, foundation, filling and mass concrete type C2 1:3:6 with 40 mm graded aggregate for DI pipes complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender