Tender For special Repair To Bldg No 258, 446 (Toilet Blocks Of Sikh Li) Including Sewage Lines At Old Md Lines Under Ge Golconda
Tender Value
14.93 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
21 days left
EMD
30000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hyderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No 258, 446 (Toilet Blocks Of Sikh Li) Including Sewage Lines At Old Md Lines Under Ge Golconda
BOQ
| Sl. No. | Item Description |
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8175/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: SPL REPAIR TO BLDG NO 258, 446 (TOILET BLOCKS OF SIKH LI) INCLUDING SEWAGE LINES AT OLD MD LINES UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Dismantling single layer mangalore pattern or similar tiles laid dry in roofing complete all as specified and directed |
| 3 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed. |
| 4 | Dismantling timber scantling 40 Sqcm and over in section, in any position complete all as specified and directed |
| 5 | Dismantling plain or corrugated steel/aluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed |
| 6 | S & F for framed, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-B,etc complete all as specified and directed by Engr-in-Charge. |
| 7 | S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed |
| 8 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 9 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets and grids and S&F for true horizontal level 600x600mm panels false ceiling system using hot dipped galvanized steel sections exposed surface with pre-coated capping, Main Tee of size 24x32mm at every 1200mm c/c maximum, rotary stitched cross Tee of size 24x 27mm at every 1200mm c/c and wall angle of size 19x19mm fixed to perimeter wall. The complete grid is to be suspended at every 1200mm c/c in both directions by using 2mm dia pre straightened GI wire at every 1200mm interval at the main Tee using fine finished angular edge including 8-9 mm thick Gypsum boards of size 600x600 mm with rear side Aluminium fril and front side PVC lamination complete all as specified and as directed. |
| 10 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide new or untreated steel surfaces exc 10 cm in width or girth including preparation complete all as specified and directed. |
| 11 | Cutting out V - grooves in plaster / masonry and inserting the waterproofing membrane and making good in CM 1:3 complete all as specified and directed. |
| 12 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof padding finished even and smooth using extra cement with WPC complete all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item) |
| 13 | M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bituminous primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and providing necessary slope with using WPC @ 3% by weight of cement complete including taking down existing roof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbing down with water to receive new treatment complete all as specified and directed. |
| 14 | M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10 cm but not exc 20cm girth complete all as specified and directed |
| 15 | S&F in repair for 15mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor. complete all as specified and directed |
| 16 | S&F in repair for 20mm bore, medium grade, galvanised iron pipe, with all fittings & fixed complete to walls & ceiling or laid in floor. complete all as specified and directed |
| 17 | Demolition of Concrete of any description and in any position not otherwise specifically provided for, cement concrete (reinforced), etc complete all as specified and directed. |
| 18 | M&L for Reinforced cement concteteType B1, 1:2:4 (20 mm graded stone aggregate) in chajjas complete all as specified and directed |
| 19 | M&L for formwork to small surfaces such as cantilever ends, brackets, ends of steps, caps and bases of pilasters and the columns and the like finishing to fair finished surface of concrete complete all as specified and directed. |
| 20 | M&L for Mild Steel TMT Bars 6 to 8mm dia bars cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge. |
| 21 | Demolition of cement concrete in ground floor and paving not exc 15cm thickness (below or above ground floor) complete all as directed. |
| 22 | M & L treating the soil along with the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron., etc complete all as specified and directed. |
| 23 | M&L 75mm thick plain cement concrete 1 : 3 : 6 mix type C2 (using 40mm graded stone aggregate) finished even and smooth with out using extra cement including necessary form work complete all as specified and directed |
| 24 | M & L cement concrete 1:4:8 Type D2 (using 40 mm graded stone aggregate and with clear river sand) in sub bases, floors and pavings etc., complete all as specified and directed |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed |
| 26 | M&L for Non skid coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm, but n exc. 0.11 sqm, in floor etc. set and jointed in net cement slurry & pointed in white or coloured cement to match over 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed |
| 27 | M&L glazed ceramic coloured tiles in vertical surface 450 x 300 x 7mm thick set and jointed in cement slurry and pointed with white or coloured cement to match incl. Rendering 10mm thick backing coat in CM 1:4 on fair faces of brick work or concrete surface complete all as specified and directed |
| 28 | M&L chequered cement concrete tiles 25 cm x 25 cm x 25 mm thick with grey cement and pigment, machine pressed : set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding layer in CM 1:6. Make : Ultra or Classic |
| 29 | Dismantling of stone slab and tiles of any description or thickness in floors, aprons laid , bedded and pointed any mortar complete all as specified and directed. |
| 30 | M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms, over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc complete all as specified and directed |
| 31 | M & L for 20-25 mm thick Kota stone slab over 15 mm thick rendering in cement mortar 1:3 as in backing coat in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and as directed. |
| 32 | Demolition of brick work or stone/boulder masonry, built in cement mortar complete all as specified and directed |
| 33 | M&L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:6 using old size bricks complete all as specified and directed. |
| 34 | M&L for cleaning/removing all vegetation, bushes/small trees on vertical side of wall/chhaja/slab of building and making good the surfaces with PCC 1:2:4 type B-0 (12.5mm graded stone aggregate) or rendering in CM (1:3) including removing spoils obtained to a distance not exc 50 metre and depositing complete all as specified and directed. |
| 35 | Taking down cement or cement lime plaster on brick or stone walls/ceiling including raking out joints, hacking for keys, scrubbing down with water etc. |
| 36 | M&L Rendering, 10mm thick, in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement including taking down existing plastering of any description all as specified and as directed. |
| 37 | M&L Rendering, 15mm thick , in CM (1:4) mixed with water proofing compound as per manufacturer instruction on fair surfaces of brick or concrete walls, finished even and smooth without using extra cement including taking down existing plastering of any description all as specified and as directed.Note: WPC shall be measured and paid separately. |
| 38 | Supply only liquid water proofing compound of approved make complete all as specified and directed. |
| 39 | M&L 5 mm thick plastering in CM 1:3 finished even and smooth without using extra cement on concrete surface of ceilings. |
| 40 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali-resistant primer and 1.5 mm thick wall care putty on plastered surfaces complete all as specified. |
| 41 | M&L for preparation of newly plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces complete all as specified. |
| 42 | M & L preparation of new surfaces of ceiling plastered or unplastered and applying three coat of white wash to obtain uniform surfaces complete all as specified and directed. |
| 43 | M & L for complete removal of existing treatment and applying 1.5mm thick white wall care putty to fill up the depression and rubbing with sand paper to achieve a levelled and smooth surface and applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared surfaces of internal walls complete all as specified and directed. |
| 44 | M & L for complete removal of existing treatment and applying two coats of weather proof exterior grade paint on prepared surfaces of walls complete all as specified and directed. |
| 45 | M & L preparation of old decorated surfaces of ceiling plastered or unplastered including removing by brooming down all dust, dirt and all loose scales by steel wire brushing, scrapping down smoke, soots, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying two coats of OBD on ceiling, white or tinted comlpete all as specified and directed by Engineer-In-Charge. |
| 46 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each and removing to or from store. |
| 47 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each and removing to or from store. |
| 48 | M&L for cement concrete 1:2:4 type BI using 20mm graded stone aggregate in bed block for hold fasts and coping including necessary form work weathering slightly rounded or chamfered angles and treating and making good the disturbed portion complete all as directed. |
| 49 | M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints and making good the surfaces complete all as specified |
| 50 | S & F for 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, both sides covered with decorative face veneer with lipping/frame to match, complete all as specified and directed. |
| 51 | Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D\\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6\\" pitch complete for finished item of work.(Make : NCL / ELIXIR METFORM PVT LTD or techno commercially Equivalent make as listed in list of makes and as approved by GE) |
| 52 | S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying fixing in opening etc. |
| 53 | M & L factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing all as specified and directed |
| 54 | S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21. |
| 55 | S & F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150 mm etc complete all as specified and directed. |
| 56 | S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete. |
| 57 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm & fixed with stainless steel wire staples fixed. |
| 58 | M&L preparation of new surfaces of wood or wood based material description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed. |
| 59 | S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in repairs |
| 60 | Disconnecting existing tanks of capacity exc 250 & n exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) |
| 61 | Dismantling pvc water tanks of capacity 500 ltr and removing to store |
| 62 | Dismantling pvc water tanks of capacity 1000 ltr and removing to store |
| 63 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )of 500 ltr capacity hoisted and fixed in position all as specified . |
| 64 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top )of 1000 ltr capacity hoisted and fixed in position all as specified . |
| 65 | S & F Vitreous China wash basin, white, flat back, size 630x450mm including cutting for & pinning in ends of brackets or erecting stand but exclusive of fixing of supply of waste pipe fixed in repairs. |
| 66 | S&F in repair PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe. |
| 67 | S&F in repair PVC float set complete of internal flushing system fitting in side for low levelling PVC cistern Complete all as specified & directed. |
| 68 | S&F in repair of flush pipe of polythene of low or high density or PVC 32mm for low level Cistern to pedestal pan, including joints Complete all as specified.. |
| 69 | S & F in repair PVC waste pipe 900 mm long with complete fitting etc 32 mm dia complete all as specified and directed. |
| 70 | S & F in repair Vitreous china premium/ 1st quality wash down water closet EWC white/ ivory/off white (closed pattern including all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flushpipe) complete in all respect all as specified. |
| 71 | S&F in repair plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminized hinging device. |
| 72 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 73 | S & F in repair Vitreous China squatting pan , \\"Orrissa\\" pattern size 580 X 440 mm white with integral footrest (excluding flushing cistern & flush pipe) including 'P' or 'S' trap complete including provision of cement concrete. |
| 74 | Supply and fixed in repair 15 mm bore Bib taps cost copper alloy Chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule |
| 75 | S&F in repairs 15 mm bore two way Bib taps fancy type cast copper alloy chromium plated screwed down, screwed for iron pipe or for brass ferrule Branded Make complete all as specified and directed. |
| 76 | S&F in repair 15 mm dia Stop valves, cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for union with long shank and complete all as specified and directed |
| 77 | S&F in repair 15mm Bib tap of PTMT fancy type any colour high pressure screwed and fixed. (Minimum weight 105gms) |
| 78 | S&F CPVC ball valves, with CPVC lever, screwed both ends to pipes of 25mm bore fixed complete. |
| 79 | S & F 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repairs. |
| 80 | S&F PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed in repairs. |
| 81 | S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed in repairs |
| 82 | S & F 15mm bore fancy type single lever Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, swan pipe, screwed for iron pipe and fixed in repairs |
| 83 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 84 | S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms) |
| 85 | S&F Brass Wardrobe hooks (single) 50mm to 60mm15 mm dia complete all as specified and directed. |
| 86 | S&F15 mm dia Brass chromium plated shower rose 125 mm size fixed in repairs |
| 87 | Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required |
| 88 | Dismantling of cast iron/AC/PVC pipes 75 mm dia, jointed in cement mortar and taking out of trenches if required |
| 89 | S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 110 mm, etc complete all as specified and directed. |
| 90 | M & L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 100 mm dia SWG pipe. |
| 91 | S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls. bore of pipe in 110 mm, etc complete all as specified and directed. |
| 92 | S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, bore of pipe in 75 mm, etc complete all as specified and directed. |
| 93 | S & F for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall. bore of pipe in 75 mm, etc complete all as specified and directed. |
| 94 | M&L 110 mm bore PVC( SWR ) bend with oval access doors, including taking down. |
| 95 | S & F for PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specified and directed. |
| 96 | S&F PVC (SWR) bends (size of bore 110mm) |
| 97 | M & L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, diameter of outlet in 75 mm, etc complete all as specified and directed. |
| 98 | S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms), etc complete all as specified and directed. |
| 99 | Dismantling of sewage drain pipes of dia 150mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 100 | Dismantling of sewage drain pipes of dia 200mm, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 101 | M & L Reinforced cement concrete pipes, 150mm bore, class NP2 laid and jointed complete with collars laid in trenches complete all as specified and directed. |
| 102 | M & L Reinforced cement concrete pipes, 200mm bore, class NP2 laid and jointed with collars laid in trenches complete all as specified and directed. |
| 103 | M & L PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 104 | Cutting into existing manholes for connecting new drains of internal dia of pipe 150mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required. |
| 105 | Excavation in trenches n.exc 1.50m wide and n.exc. 1.50 m depth and getting out in hard/dense soil. |
| 106 | Returning, filling in including spreading, levelling, watering and well ramming in layers n. exc 25 cm all as specified. |
| 107 | Removing excavated materials n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point in soils. |
| 108 | Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and directed. |
| 109 | Taking out carefully aluminium Service Wire including making good the disturbed surface of wall/floors complete all as specified and directed. |
| 110 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metallic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed / surface wiring on stone/brick, masonry walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one way modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site for :- one light/bell controlled by one switch. |
| 111 | All as per item No. 109 but for one 3 pin socket 6 Amp on independent board. |
| 112 | All as per item No. 109 but for one 3 pin socket 6 Amp on same board. |
| 113 | All as per item No. 109 but for One 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmm PVC (FRLSH) insulated unsheathed copper conductor single core multi stand flexible cable all as specified and directed. |
| 114 | Supply and fix Modular switch, single pole, one way, 6 Amps one module complete. |
| 115 | Supply and fix Modular socket, shuttered type, 6A - 3 pin 2 -module all as specified and as directed |
| 116 | Supply and fix Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed. |
| 117 | Supply and fix Modular socket, shuttered type, 6/16A - combined 2-module all as specified and as directed. |
| 118 | Supply and fix Ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body 65x50 mm, terminals 240 volts complete, all as specified and directed. |
| 119 | Supply and fix 20W,decorative, wall mounted, ultra slim, LED lighting fixture size (1224x 43x58)mm, 6500K with high lumen output, environmental friendly, energy efficient with electronic driver polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete with all fixing arrangement etc, complete all as specified and as directed. Makes : Cat Nos. STOUTMINI1200BS20WLED 865SPCWH of HAVELLS / BN100CLED20S-6500PSUL 120GRS4 of PHILIPS / WIPRO. |
| 120 | Supply and fixing LED BLDG Security Light fitting 35 Watt, 230 V, AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp and corrosion resistant including thermal management in multiple optics complete with IP 66 protection separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm dia light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by engineer-in-charge. Makes : Cat Nos. ENDURASUNDOWNSL35LED765PASYBOPC of HAVELLS/ BRPO30PLED35CWSCRGRPSUSPD of PHILIPS / LRO2-391-XXX-57-XX35W of WIPRO. |
| 121 | Supply and fix in repair Factory made SPN 4 ways distribution board in sheet steel enclosure double door with suitable rated bus bar, 240 Volts suitable for housing RCBO SPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed. |
| 122 | S&F in repair Factory made SPN 8 ways distribution board in sheet steel enclosure double door with suitable rated bus bar, 240 Volts suitable for housing RCBO SPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed. |
| 123 | Supply and fix MCB SP 06 to 32 Amp, 240 volts complete all as specified and directed. |
| 124 | Supply and fix RCBOs DP 40 Amp, 240 volts 50Hz AC supply, complete all specified and directed. |
| 125 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point including necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1, funnel with 20 mm dia medium grade GI pipe for water, 15mm dia medium grade protection pipe for GI earth lead complete all as specified and directed by the Engr-in-charge. |
| 126 | M & L lamp holder insulated body with black plate suitable from batten fitting complete all as specified and directed at site |
| 127 | S & F 1100 volts grade heavy duty cable PVC insulated aluminium conductor 16 Sqmm, served with inner sheathing of PVC sheathed in service connections suspended by insulating hangers not more than 1 meter including 4mm suspension wire, one twin core cable fiat or circular complete all as specified and directed. |
| 128 | S&F galvanized steel water tubing medium grade of 25mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions including taking up or down existing steel tubing with fittings all as specified and directed. |
| 129 | Supply and fix gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 25 mm bore including taking down complete all as specified and directed. MAKE : LEADER/ZOLOTO |
| 130 | Cutting/Boring on the existing CI/GI pipe line 50mm dia (in position) for insertion of new galvanised Tee 50 x 25 mm for branch connection including necessary jointing material complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender