Tender For Installation & Energisation Of Mallikud-Xiii & Mallikud-Xii (Gurdapada) Lift Irrigation Project Under Kantamal Block In Boudh District Under Bkvy-Ridf-2026-27
Tender Value
1.38 Crore
Estimated cost
Bid Submission
10 Nov 2026
12 days left
EMD
1.38 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Boudh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation & Energisation Of Mallikud-Xiii & Mallikud-Xii (Gurdapada) Lift Irrigation Project Under Kantamal Block In Boudh District Under Bkvy-Ridf-2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation of foundation in hard soil within initial lead of 50m & lift of 1.5m including dressing and levelling the bed etc. |
| 2 | Earthwork in excavation of foundation in hard soil such as Hard stiff clay, stiff black cotton, hard red earth, shales, moorum ordinary gravels etc within 50m.Initial lead and 1.5m. Initial lift including rough dressing and levelling the bed and depositing the excavated materials within initial lead at nearby the worksite for reuse including breaking clods and stacking rubble for spreading and leveling as the case may be etc complete as per direction of the Engineer-in-charge. (Excavation by mechanical means 60% & manually 40%) |
| 3 | Filling in F&P with excavated materials in layers not exceeding 0.30m including breaking clods within 50m. initial lead including leveling the tranches as the case may be etc complete as per direction of the Engineer-in-charge.(Quantity by means of Mechanical 60% & mannually 40% i.e. of respective item No. 1 above) |
| 4 | Filling in F&P with excavated materials including well watered and rammed.(2/3 of respective earth work) |
| 5 | Filling F and P with sand, well watered and rammed |
| 6 | CC (1:4:8) with 4cm (1½”) size hard granite metal (Crusher Broken) |
| 7 | CC (1:2:4) with 12mm (½”) size hard granite/C.B chips (Crusher broken) |
| 8 | RCC (1:2:4) with 12mm (½”) size hard granite chips (Crusher broken) |
| 9 | C.B/K.B. Brick masonary in cm(1:6) in foundation and plinth (25cm X 12cm X 8cm size) |
| 10 | C.B/K.B. Brick masonary in cm(1:6) in Superstructure work ( 25cm X 12cm X 8cm size ) |
| 11 | 12mm thick Cement plaster in CM (1:6) over brick work |
| 12 | Cement punning over plastering |
| 13 | Rigid smooth centering shuttering for R.C.C. work including all cost etc. complete Roof slab, R.C.C. floor, Landing Balcony, Projection sun shed & Chajja, Sheles |
| 14 | Labour charge for M.S. reinforcement for R.C.C. work including cutting bending, binding & typing the grills & placing in position including cost of binding wire 18 to 20 guage per Qntl. |
| 15 | White washing 2 coats with shell lime. Finishing walls with water proofing cement paint of approved shade on new work ( 2 coats ) to give an even shade etc complete |
| 16 | R.R.H.G. stone masonary in cm (1:6). |
| 17 | 20mm thick cement plaster 1:4 grading plaster |
| 18 | 20mm (¾\\") thick C.P. (1:6) over stone works. |
| 19 | 2.5 cm. thick A.S flooring with cement concrete (1:2:4) including punning using 12mm size C.B. chips including at cost etc. complete |
| 20 | Painting two coats with approved paint on steel. |
| 21 | Distempering two coats to walls with distermper of approved shade on new work to give an even shade (Labour only) |
| 22 | Labour charges for writing reqd. data & information on the Pump Chamber |
| 23 | Cost of Iron Door with iron choukhat (size 1.00m x 2.00m) |
| 24 | Cost of Iron window with iron choukhat (size 0.90m x 1.20m) |
| 25 | Cost of C.C Ventilator, fitting and fixing of skylight (size 0.45x0.30m) |
| 26 | Cost of fitting of outlet |
| 27 | Provision for Foundation Nut Bolt & Unforseen item |
| 28 | Labour charges for writing reqd. data & information on the Brick pillar (Display Board) |
| 29 | Cost of 15.00 HP Centrifugal Monoblock Pumpset having 0.028 cumec discharge and 24 Mtr head |
| 30 | Cost of 15 HP Control Pannel with Auto Star Delta Starter & MCB |
| 31 | Cost of 63 Amp -400 V.T.P. Main Switch confirming to IS No.4064 |
| 32 | Cost of Panel Board made out of 18 gauge CR sheet |
| 33 | Cost of Motor Hood made out of 18 gauge CR sheet |
| 34 | Base Plate made of MS Channel with holes |
| 35 | 6 KVAR Capacitor |
| 36 | Cost of 3 x 16 mm2 T.D. cable |
| 37 | Cost of 4 mm2 PVC Wire |
| 38 | Electrical Earthing |
| 39 | Electrical Installation and Energisation |
| 40 | Cost of 100 mm Ø G.I. Pipe |
| 41 | Cost of 100 mm Ø G.I. Bend |
| 42 | Cost of 100 mm Ø C.I. Foot Valve (Kirloskar) |
| 43 | Cost of 100 mm Ø G.I. Flange |
| 44 | Cost of Rubber insertion |
| 45 | Cost of Nut Bolt 5/8\\" x 21/2\\" |
| 46 | Cost of 219mm MS Pipe(MD) 5.4mm thick |
| 47 | Cost of 250 mm Ø HDPE Pipe PE-80 PN-06 to deliver water at highest counter |
| 48 | Transportation of 250 mm dia HDPE pipe from nearest approved manufacturing units as listed in EPM rate contract to village site of the project |
| 49 | Supplying all materials, labour, T&P for jointing of 250 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge & Carriage of HDPE Pipe (200 mm) From Village to work Site |
| 50 | Cost of 160 mm Ø HDPE Pipe PE-80 PN-04 to deliver water at highest counter |
| 51 | Transportation of 160 mm dia HDPE pipe from nearest approved manufacturing units as listed in EPM rate contract to village site of the project |
| 52 | Supplying all materials, labour, T&P for jointing of 160 mm outer dia High Density Polythylene Pipes of specified material grade & pressure rating by butt fusion welding method as per speciication & laying in tranches including testing including all cost etc complete as per direction of the Engineer-in-charge & Carriage of HDPE Pipe (160 mm) From Village to work Site |
| 53 | Cost of 200mm Ø MS Flange |
| 54 | Cost of 250 mm Ø HDPE Tail Piece |
| 55 | Cost of 100 mm Ø Sluice Valve |
| 56 | Cost of 100 mm Ø C.I.Reflux Valve (NR Valve) with bypass arrangement as instructed by EIC |
| 57 | Cost of 50 mm Ø Air release valve with saddle & Raiser pipe |
| 58 | Cost of 250 mm x250 mm x160 mm Ø HDPE Tee |
| 59 | Cost of 250 mm Ø HDPE End Cap |
| 60 | Cost of 100x100x25mm G.I. Tee with Plug for priming |
| 61 | Cost of 250 mmx200 mm HDPE Reducer |
| 62 | Misc. Welding charges for \\"Z\\" joint, \\"S\\" bend, etc. |
| 63 | Labour charges for laying and fitting of 219 mm Ø MS pipe |
| 64 | Labour charges for delivery and fitting including fitting of priming Tee, sluice Valve, NR Valve, air release valve and riser Tee etc and installation |
| 65 | Cost of River bank cutting & shaping for const. of PF |
| 66 | Cost of Butterfly Valve |
| 67 | Cost of 160 mm HDPE Equal Tee |
| 68 | Cost of 160 mm Ø HDPE End Cap |
| 69 | Cost of 160 mm x 160 mm x 110 mm Ø GI Raiser Tee with accessories (Weldless) |
| 70 | Cost of 11/0.4 KV 63 KVA Transformer (BIS Energy level -II) DPM S/S ( 10 Mtr PSC Pole with Masonary Boundary Wall for Elephant Corridor Area) |
| 71 | Cost of Construction of 11 KV 3 Phase 3 Wire Line with 1C x 55 mm2 insulated covered Conductor with 1 no tapping-point by using of 330 Kg, 10 Mtrs Long PSC Pole. (Average Span 40 Mtr), 11 KV \\"V\\" Cross arm required No. of 11 KV T & C Disc. Polymer insulators in tension Point & 11 KV Pin Polymer insulators, Couping & Padding of Poles with all G.I.Channels. Danger Board at each Pole, Anti Climbing Devives, Stay set at Bending point & double stay at end point with 18 mm G.I.H.T. Stay, concreting of stay with Anchor Plate, guarding at Road Crossings etc if required, including cost of all materials, labour transportation, inspection & commissioning etc. complete Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender