Tender For Addn/Altn And Special Repairs To Offrs/Jco/Or Md Accn At Bareilly Under Ge West Bareilly
Tender Value
13.42 Crore
Estimated cost
Bid Submission
18 Nov 2026
26 days left
EMD
9.97 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addn/Altn And Special Repairs To Offrs/Jco/Or Md Accn At Bareilly Under Ge West Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | ITEM OF B/R |
| 2 | M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of floor tiles and hearting complete all as specified. |
| 3 | M & L for non-skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles and in vertical surfaces of tiles and rendering 10 mm thick in cement mortar 1:4, including dismantling as in backing layer complete all as specified. |
| 4 | M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling of tiles and screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of floor tiles and hearting complete all as specified. |
| 5 | M&L for Vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and with 15mm thick screed bed 1:6 cement motar including dismantling of floor tiles and hearting complete all as specified and directed. |
| 6 | M&L for Vitrified double charged coloured ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm and not exc 1.00 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement and in vertical surfaces including dismantling of tiles and rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified. |
| 7 | M&L for Glazed (plain /coloured) ceramic tiles wall (600x300) mm 7 mm thick on vertical faces of walls including 10mm thick rendeing in CM 1:4 set jointed in neat cement slurry and pointed in coloured cement to match including taking down old dado/skirting complete all as specified. |
| 8 | M&L for Providing & injecting chemical for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in a portion with cement mortar 1:2 to match the existing apron complete all as specified and directed. |
| 9 | M & L for Post Construction Anti TermiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed. |
| 10 | Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 Sqm each including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified and directed. |
| 11 | Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 Sqm each and not exc. 4.00 Sqm including making good disturbed portions of wall with new or old bricks, lintel,cills, etc in CM 1:4 complete all as specified. |
| 12 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 13 | Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 14 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note :- M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately |
| 15 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note :- M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately |
| 16 | S & F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall not be paid separately |
| 17 | S & F factory made solid wire gauzed and Skelton WPC (Wood Polymer Composite) door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam WPC channel having a WPC sheet strip of 20 mm width stuck inside with solvent cement for stiles and The wire gauze and campsule mesh shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and on other side 10mm 900 bent edge, Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.Note:- wire mesh and campsule mesh for door shall be paid separately |
| 18 | S&F for 125x60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1, necessary fixing lugs, SS hinges, lock strike plate, 02 x MS bar/flat at bottom of the frame etc, complete including wooden texture finished paint on the frame surface all as specified and directed. |
| 19 | S&F for 105x60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filing and inner surface of the frame shall be treated with a coat of bituminous paint & compaction with PCC 1:3:6 Type C1 necessary fixing lugs, SS hinges,lock strike plate, 02 x MS bar/flat at bottom of the frameetc, including wooden texture finished paint on the frame surfacecomplete all as spd and directed. |
| 20 | S&F for 35 mm thick Factory made flush shutter, solid core construction with block board core and ply wood face panels, commercial type on both side, complete all as specsified & directed. |
| 21 | M & L for 35mm thick Factory made plain framed glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, with sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass including campsule mesh tightly fixed with the glazed and skelton door shutter etc, of 2nd class hard wood, members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed. Note:- Campsule Mess will be measured and paid separately. |
| 22 | S&F for 20 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain rigid white lamination as in cup board shutters, with wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified and directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) thickness of laminated not less than 0.25mm for inside rigid white type & 0.12 (14 micron) mm for outer decorative type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets. 3) Frame to be fixed to walls, soffits & base of cupboard with fasterners. |
| 23 | S&F for 18 mm thick solid PVC board, both side prelaminated, one side with decorative choice lamination, and other side plain rigid white lamination as in cupboard shelves & partitions including powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) and as in fixing to sides of cupboard, soffits & base of cupboard with SS fastner also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified as directed. Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Thickness of laminated not less than 1mm for inside plain white type. The laminate shall be fixed to base with approved adhesive as per manufacturer's instructions and machine pressed to ensure proper bonding with base ply and avoid air pockets . |
| 24 | S&F for 16 mm thick solid PVC board, one side prelaminated and other plain white lamination, fixed on back side of wall of cup board with SS fastners complete all as specified as directed. |
| 25 | S&F for selected quality modular type stainless steel hydraulic concealed hinges.Make Hettich cat No ONSYS 4447i product code 928143200/ Kaff nickel SC hinges 100 code No KHSC-0/Godrej product code 6933, Baan code LKYAHCHR4) |
| 26 | S&F for fancy type 200 mm long stainless steel handles etc, complete all as specified and directed |
| 27 | S&F for 100mm long stainless steel butt hinges complete all as specified and directed. |
| 28 | S&F for 150mm long aluminum anodised, barrel tower bolts of extruded section and fixed. |
| 29 | S&F for 150mm long aluminum handles, cast type complete all as specified and directed. |
| 30 | S&F for 200mm long aluminum anodised, barrel tower bolts of extruded section and fixed. |
| 31 | S&F for 150mm long Extruded aluminium alloy handles, fabricated type, anodised |
| 32 | S&F 150 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 33 | S&F 300mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as spd and directed. |
| 34 | S&F for 1.2mm thick aluminum anodised campsule mesh aperture not more than 1 cm fixing with screw in the door for protection of mosquito wire mesh and all as spd and directed. |
| 35 | S&F galvanised Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specifed and directed. |
| 36 | S&F 200 mm size, MS ordinary rat tail rod pattern springs including roller and roller plate complete including fixed to wooden and steel chowkats. |
| 37 | M&L Preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint. |
| 38 | M&L painting to wood and wood based surfaces of any description exc 10cm with or girth with two coats of synthetic enamel paint over a coat of pink primer including preparation of newly or previously untreated surface all as spd and directed |
| 39 | M & L preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint |
| 40 | M&L for painting to steel surface exc 10 cm width or girth with two coats of synethic enamel paint over a coat of red oxide primer including preparation of newly or previously untreated surface all as spd and directed |
| 41 | M & L for Plain Cement Concrete 1:3:6 type C-1(using 20 mm graded aggregate) as in bed blocks for hold fast/concrete filling in chowkhats and similar work etc complete all as specified and directed. |
| 42 | M & L for 15mm thick ready mix external sand faced cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specifications, surfaced finished even and fair incl taking down existing plaster complete all as specified and directed.Note :- WPC shall not be paid separately for this item. |
| 43 | M & L for 15mm thick ready mix external sand faced cement plaster on brick or concrete surfaces including providing & mixing water proofing compound as per manufacturers specifications, surfaced finished even and fair complete all as specified and directed.Note :- WPC shall not be paid separately for this item |
| 44 | M & L for 12 mm thick ready mix internal sand faced cement plaster on brick or concrete surfaces finished even and fair incl taking down existing plaster complete all as specified and directed. |
| 45 | M& L for 12 mm thick ready mix internal sand faced cement plaster on brick or concrete surfaces finished even and fair complete all as specified and directed |
| 46 | M & L rendering 5 mm thick ready-mix sand faced cement plaster as on concrete surfaces on soffits of slab, ceilings finished even and smooth incl taking down existing / defective plaster complete all as specified and directed |
| 47 | M & L rendering 5 mm thick ready-mix sand faced cement plaster as on concrete surfaces on soffits of slab, ceilings finished even and smooth complete all as specified and directed |
| 48 | M&L white washing three coats on ceiling surfaces including preparation of newly plastered untreated surfaces and necessary scaffolding all as spd and directed |
| 49 | M&L Preparation of old decorated surfaces and applying two coat of white wash on ceilings surfaces and rubbing down with sand paper to have even and smooth surfaces all as specified & directed by Engr-in-Charge. |
| 50 | M&L for applying 2.0 mm thick layer of wall care putty on external and internal wall surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface complete all as spd and directed. |
| 51 | M & L applying two coat of distemper oil emulsion white or tinted on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. |
| 52 | M & L applying two coat of distemper oil emulsion white or tinted on newly decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified. |
| 53 | M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls / roof projections including facia,cornices etc one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and accessories for applying Primer, should be able to spray in hard to reach areas and penetration of Primer, on the surface to achieve excllent application using limited manpower at any hight upto 10m with necessary scafolding and safety measure are inclusive in the rates complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. |
| 54 | M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior weather proof paint, should be able to spray in hard to reach areas and penetration of exterior weather proof paint on the surface to achieve excellent application using limited manpower at any hight upto 10m with necessary scafolding and safety measure are inclusive in the rates complete all as specified and directed. |
| 55 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles all as spd and directed |
| 56 | M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as spd and directed |
| 57 | M&L brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:4) all as spd and directed |
| 58 | M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IIIrd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed. |
| 59 | Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and stair case similar work carefully and matching to adjoining disturbed surfaces all as directed. |
| 60 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for. |
| 61 | M & L form work to edges of concrete rough finished surface flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide. |
| 62 | Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed. |
| 63 | M & L formwork to sides and soffits of lintels,lintel bend, beams etc finished rough surfaces of concrete complete all as specified. |
| 64 | M & L formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular finishes rough surfaces of concrete.etc finished rough surfaces of concrete complete all as specified. |
| 65 | M & L formwork to chullah hoods, chajjas, trough and similar items including edges finished rough surfaces of concrete complete all as specified. |
| 66 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia. |
| 67 | S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia. |
| 68 | M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves and stair case etc.all as specified and directed. |
| 69 | M&L RCC type B 1, 1:2:4 (20mm graded agg) as in beams, cantilevers, lintels, over 1.5 m span. |
| 70 | M&L RCC type B 1, 1:2:4 (20mm graded agg) as in columns, pillars, piers, posts and struts. |
| 71 | M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in chajjas and like all as specified and directed. |
| 72 | Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical, apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx 50 mm (10 mm gauge welded mesh ) & tack , securing with clips / linding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @ 200 ml every 50 kg of cement and applying two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as spd as directed. Water proofing Compound :-Dr Fixit (Pidiproof LW+ or pidicrete URP). |
| 73 | Demolition of cement concrete(un-reinforced), in any position and paving n.exc. 15 cm thickness (below or above ground level) including tile/ terrazzo floor complete all as specified and directed. |
| 74 | M & L for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair including forming 10 mm wide joints at not exceeding 3 m distance between adjoining slabs shall not exceed 10 mm in thickness and shall be filled with bitumen mastic i.e. bitumen and sand in proportion 1:2 all as specified or as directed. |
| 75 | Providing water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidiproof LW+ or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.) |
| 76 | Supply only liquid waterproofing compound all as specified. |
| 77 | M&L for cement concrete type E2 1:5:10 (40 mm graded aggregate) as in mass concrete |
| 78 | S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed. |
| 79 | M&L for PCC type B0, 1:2:4 nominal mixed (using 12.5 mm graded aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs, levelling course, haunching over RCC roof surface including rounded or chamferred on edges etc and like including weathering, slightly rounded all as specified and directed. |
| 80 | M&L for 15 mm thick rendering using ready mix cement plaster on brick or concrete surfaces finished even and fair on fair faces of concrete surfaces in CM 1:4 with water proofing compound complete all as specified and directed.(NOTE:- WPC shall be measured and paid separatly) |
| 81 | Dismantling of roof terracing cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified. |
| 82 | M&L 30 mm thick cement concrete type B1 1:2:4 using 12.50 mm graded stone aggregate in levelling course, finished even and smooth with out using extra cement complete all as specified and directed |
| 83 | M&L for preparation of roof surface applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane(weight not less than 3.5 kg/sqm, 3mm thick consisting 100 mm micron HMHDE FILM ) and applying one coat of industrial btumen grade 85/25 @ 1.2 kg/sqm on top of membrane with 100 mm overlap at side end lap where required as per manufacturer instruction and complete all as specified and directed Make :- IWL Hyperplas Polyster (M/S IWL), Super Thermolay (M/S STP Limited), Torch Shield AP by Pidilite Industries.: |
| 84 | M & L for applying one coats of Bitumen based UV reflective and water proofing paint with aluminium finish over APP membrane and maximum coverage 8.00 Sqm per litre per coat on non assessible roof over APP membrance complete all as specified.Make “STP Ltd” Brand-“Super silver Shield” or equivalent quality |
| 85 | M & L for heat reflective weathering tile minimum 250 x 250 x 15 mm thick, fixed with neat cement slurry over laid over 20 mm thick screed bed in cement mortar 1:4 on roof top and joints shall be 4mm wide, sealed with 2 mm deep polysulphide compound (sealing compound) complete all as specified and directed. |
| 86 | M&L for 18-20mm thick Granite (Z- black/selected colour by GE) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. stone including grinding and polishing and 15mm screed bed in cement mortar 1:6 including dismantling of tiles, hearting etc complete all as specified. |
| 87 | M&L for 18-20mm thick Granite (Z- black/selected colour by GE) machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition wash basin platforms and flooring, skirting/ dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed and dismantling of wall tile including cement mortar bedding complete all as spd and directed. |
| 88 | M & L for 18-20 mm thick machine cut pre polished kota stone slab flooring laid under stairs soffits area and jointed with grey cement slurry fixed with pigment to match to shade of the slab including rubbing and mirror polishing over and or 20 mm thick bedding layer of cement mortar 1:6 for laying floor finishes even and rough with and including dismantling floor, hearth or wall kota stone slab including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed. |
| 89 | M&L for 18-20mm thick machine cut pre polished kota stone slab in riser of steps skirting, dado and pillar,landing in single piece with round nosing with three numbers of serration using as front door steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing ding and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed dismantling of wall tile including cement mortar bedding complete all as spd and directed. |
| 90 | Rounding to edges of stone slabs one edge, such as in steps , cooking platform, and other similar situations complete all as specified and directed |
| 91 | S&F in repiars vitreous china wash down water closet (Pedestal pattern) white including connection to drain pipe, flushing pipe antisyphonage pipe et, seat cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed. |
| 92 | S&F in repairs vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with \\"P\\"or \\"S\\" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding (1:2:5), minimum 150mm all round and finish just below level of rim of pan complete all as specified and directed. |
| 93 | S&F in repairs PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. |
| 94 | S&F in repairs fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. |
| 95 | S&F fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified and directed. |
| 96 | S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed. |
| 97 | S&F 15 mm dia bib tap fancy type chromium plated with flange quarter turn incl all necessary fittings complete all as specified and directed. |
| 98 | S&F in repairs 450mm long PVC connection 15mm bore with PTMT nuts. |
| 99 | Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified or as directed. |
| 100 | Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete all as specified or as directed. |
| 101 | Refixing 15mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 102 | Refixing 20mm dia old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) |
| 103 | S&F for 20 mm (outter dia) bore CPVC water tubing with SDR 11 & Plain CPVC SDR 11 fittings' and fixed complete to wall and ceiling or laid in floors of any description complete all as specified or as directed. |
| 104 | S&F for 32 mm (outter dia) bore CPVC water tubing with SDR 11 & Plain CPVC SDR 11 fittings' and fixed complete to wall and ceiling or laid in floors of any description complete all as specified or as directed. |
| 105 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 590 x 460x 230 mm bowl size 540 x 410 x 230 mm (minimum) etc complete all as specified and as directed . |
| 106 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 590 x 460x 230 mm bowl size 540 x 410 x 230 mm (minimum) etc complete all as specified and as directed . |
| 107 | S&F in repairs stainless steel kitchen sink with double bowl without drain board made of 1 mm thick 304 grade stainless steel with plugs washers and waste pipe and coupling, round stainer including bedding in cement mortar on dwarf walls including brackets and connecting union to pipe complete. Make :- Cat No B4513201 of Cera, Asian Paints Cat Part No DBG37188 or equalant of Hindware or Kajaria. |
| 108 | S&F in repairs 75 mm x 32 mm dia chromium plated waste fitting special size suitable for stainless steel sinks including PVC flexible waste pipe of approved quality complete all as specified and directed. |
| 109 | S&F in repairs stainless steel gratings 100x100mm selected quality complete all as specified and directed. |
| 110 | S&F in repair fancy type stainless steel towel rack size 600mm long including a pair of brass bracket complete all as specified and directed. |
| 111 | S & F stainless steel plate rack not less than 5 Kg of size 31\\"X36\\"X10\\" complete all as specified and as dirrected. Make : Siver shine SSK-135, BSKPR-315 Bluestar |
| 112 | S&F in repairs Vitreous China table/counter top wash basin of suitable size including SS bottle trap, and cabinet of PVC shutter fixing on counter with SS waste coupling complete all as specified and as directed. |
| 113 | S&F Vitreous chinaware coloured wash hand basin with padestal of size 55X40X82cm complete including CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as and directed by Eng in charge. |
| 114 | S&F fancy type brass chromium plated toilet paper holder, complete all as specified and as directed. Model No :- ACN-1153N Jaquar, Hindware model No F 880003, Parryware model No T6514A1 & Asian Paints Cat Part No AC506B. |
| 115 | S & F in repairs fancy type 150mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed. |
| 116 | S&F brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls incl necessary fitting incl taking down old wall mixer of any discription complete all as specified and as directed.Model : Model of Hindware Cat No F390022, Cera Cat Part No :- F1012403, Kerovit Cat Part No KB511018 & Asian Paints Cat Part No ALWM104. |
| 117 | S&F Brass chromium plated wall mixer 2 in 1, 15mm for mixing hot & cold water incl provision of over head shower, screwed down three joints to steel pipes or unions and plugging and screwed to walls incl necessary fitting complete all as specified and directed. Model : Hindware Cat No F390020 , Cera Cat Part No :- F1020411, Kerovit Cat Part No KB411019 & Asian Paints Cat Part No THWM103. |
| 118 | S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink fixing and connection to pipes incl necessary fitting complete all as specified and as directed. Model :- Cera cat Part No:-1016501 ,Kerovit Cat Part No KB411019 & Asian Paints Cat Part No SYSM101. |
| 119 | S&F in repairs health faucet 1 mtr SS Braided connection tube with wall hook complete for ETWC incl necessary fitting complete all as specified and directed. Make : Jquare Cat Part No ALD-CHR-577, Cera Cat No :- F803008AB, Asian Paints Cat Part No C-232N & Kerovit Cat No KA580008 |
| 120 | S & F magnet catch with striking plate including letting in complete all specified and as directed. |
| 121 | S&F stainless steel of AE- SI 316 grade tubular towel ring including a pair of CP brass bracket complete & necessary fitting all as specified and directed.Model No:- Cera Model No F5002105, Asian Paints Cat Part No SQTW 201 & Kerovit Cat Part No KA670005 |
| 122 | S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. |
| 123 | S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed.Model: model No F-5005301 of CERA, Asian Paints Cat Part No AC107 & Kerovit Cat Part No :- KA920005 |
| 124 | S & F Brass CP Hand Shower with 15mm dia 1.2 Meter long flexible tube and wall hook screwecd for iron pipe fancy type long body complete all as specified and directed.Model No :- Hindware Model No F160053, Cera Cat Part No :-F7030308AB, Kerovit Cat Part No:- KA520008 & Asian Paints Cat Part No HS-208. |
| 125 | S&F in repirs designed looking mirror area exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CP plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. |
| 126 | S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. Model: Cera Model No F505101 & Kerovit cat Part No KA990014. |
| 127 | S&F PVC corner set of three of size (12'X12\\" ,9\\"X9\\" and 6\\" X6\\" ) with railling and complete all as specified and directed. |
| 128 | S&F in repairs fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed.Model :ARI 39001B Aria of Jaquar ,Hindware Model No F280010 SCP, Cera Model No F2002461, Asian Paints Cat Part No MMCH101 & Kerovit Cat Part No :- KB1211026. |
| 129 | S&F fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed.Model :ARI 39001B Aria of Jaquar ,Hindware Model No F280010 SCP, Cera Model No F2002461, Asian Paints Cat Part No MMCH101 & Kerovit Cat Part No :- KB1211026. |
| 130 | S/F low density polyethene pipes (LDPE) 32mm of pressure rating 6 Kg/cm2 fixed to walls. |
| 131 | S&F stainles steel Curtain Rod 25 mm dia of approved quality with two number decorative design as approved brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod all as directed and specified. |
| 132 | Dismantling water tanks and removing to store capacity exc 250 and not exc. 500 litres complete all as specified and directed. |
| 133 | Dismantling water tanks and removing to store capacity exc 500 and not exc.1000 litres complete all as specified and directed. |
| 134 | S & F 500 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I |
| 135 | S&F Rotational moulded polyethylene triple layered water storage tanks of 1000 Litre capacity white in colour (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I |
| 136 | S&F 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed. |
| 137 | S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified or as directed. |
| 138 | S&F Mild steel OHT cage, cooler stand, bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-290 Gde - E-165 all as spd and directed. |
| 139 | Taking up or down AC/PVC rain water pipe, soil/waste/vent pipe of any size with fittings etc. |
| 140 | S & F PVC (SWR) 110 mm dia soil waste or rainwater drainage pipes single socketed in any length with rubber ring joint laid in floor or fixed on wall all as specified or as directed. |
| 141 | S & F PVC (SWR) 110 mm bore bends all as specified or as directed. |
| 142 | S&F in repair PVC (SWR) multi floor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 complete all as specified and as directed. |
| 143 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and as directed. |
| 144 | S & F spun iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to walls complete all as specified |
| 145 | S&F in repairs PVC 110mm bore Y-Junction piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door |
| 146 | S&F PVC 110mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door |
| 147 | S&F PVC 75 mm bore branch piece single (equal or unequal) ordinary or inverted (spigot or shocket type) or with parallel branches with oval access door |
| 148 | S&F 110mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door |
| 149 | S&F 75mm bore PVC bends (any radius) diminishing pieces or tapers (larger bore mesured) with oval access door |
| 150 | S&F in repairs 75 mm bore PVC cowl complete all as specified. |
| 151 | S&F powder coated aluminium sliding windows frame with movable shutter (sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clipsa, frame made with aluminium section as appended below- (i) Window frame (92x38x1.15) mm thick for three tracks(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or along with F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such as aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. Note : Rate for glass and wire shall not be paid separately. |
| 152 | S & F for stainless steel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed. |
| 153 | M&L for 100x100mm Stainless steel floor trap Anti cock roach proof Trap complete all as specified or as directed. |
| 154 | S&F aluminium power coated (colour) section as in kitchen cabinet/ cupboard shelf incl hanging self for clothes with aluminium clip/strips, pvc beadings fixed with adhesive on edging window,ventilator,glazed with aluminium shutter(medium weght) of suitable size, one or more rebate,cut to jointed together with cadmium plated steel screws including rubber bending or gasket for aluminium sections for fixing glass/Xpm jalli and necessary fittingd,screws, plugs for fixing screws, etc complete all as specified and directed by EIC. Weight of section should not less than 0.55kg per RM.Note :Cost of rubber beading and required accessaries will be covered in the item and will be not paid extra.. |
| 155 | M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination work complete all as specified and directed. |
| 156 | M&L for Improved cupboard (Kitchen cabinet) made of 18mm thick prelaminated PVC board exterior grade wirh one side decorative lamination glossy finish & other side plain white in shelves, side back and doors including PBV Liping on all exposed edges of same texture & shade to match tht of laminat, fitted with selected quality improved type stainless steel hydraulic concealed hinges of (Make Hettich cat No ONSYS 4447i product code 928143200/ Kaff nickel SC hinges 100 code No KHSC-0/Godrej product code 6933, Baan code LKYAHCHR4) fancy type 200mm long stainless steel handles etc complete all as specified and directed. Note - Area shall be measuered flat on face of the cupboard 1, Design & layout of cabinaet and pattern/ colour of laminate shall be as approved by GE. |
| 157 | M&L for stainless steel (AISI 304 Grade ) Non magnetic multilayer nikle chrome plated for multipurpose utensil container including frame work telecscopic channels, handles etc as reqd and complete all as specified and as dircted utensil sample, design and pattern of each basket to be approved by GE the foloowing size in each kitchen. (a) plain basket 510x470x100mm or 520x485x100mm or 530x505x150mm slace godrej code 6126 Baan code LKY2PB 2014 -Evershine size 520x485x90mm of 03 nos (b) multisize plate basket of size 510x470x150mm or 520x485x150mm or 436x500x200mm (Clear depth 500mm) 02 nos make Silk Elnora BAAN code LKY-3CS214- Ever shine size 520x485x90mm approved by GE(c) Cutlery Basket, with Perforated bottom and side of compacted -slots for holding cutlery of size 510x470x100mm or 520x485x100mm or 144x468x50 (Clear dpth of 500mm) 02 nos make Silk Elenora (Asian Paint) code 600, size 530x505x100mm (Godrej Product code 6134 BAAN Code LKY2PC214/Ever shine size 520x485x95mm(d) Plain basket of size 510x470x200mm or 520x485x200mm or 486x500x200mm 02 Nos make Silk Elenora (Asian Paint) code 600, size 53x505x200mm- Godrej product code 6128 BAAN code LKY 2PB218- Evershine size 520x485x180mm (e) pull out with 2 basket each of size 150x485x80mm or 100x485x80mm 01 Nos make Sleek Elenora (Asian Paint ) code 250 size 180x500x590mm / Godrej product code 6141 baan code LKYNS2SP6/Ever shine size 610x485x90mm (f) dust bin as reqd 01 Nos Make 200 series of Hettich |
| 158 | S&F for mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed. |
| 159 | S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 Sqm each pane all as spd & directed |
| 160 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade Fe-410 gde st- 240 complete all as specified and directed. |
| 161 | M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 162 | M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 163 | M&L Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed. |
| 164 | S&F for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete,incl fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of existing MS/RCC railing complete all as specifed and directed. |
| 165 | S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 75mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 166 | S&F for Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays for 100mm dia pipe, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed. |
| 167 | S&F for 3.15mm dia magic eyes for looking out side from main of door and for safety pupose only complete all as specified and directed. |
| 168 | M&L for 25mm thick cement concrete 1:2:4 type B2 (using 20mm graded aggregate) for levelling of sub base of flooring complete all as specified and directed. |
| 169 | S&F for computerised reflective letter / bldg number on ACP sheet (size 50 cm x 45 cm) and fixing with 04 nos of screw, rawal plug etc on wall in front of building complete all as specified and directed. |
| 170 | M&L 15mm thick ready mix sand faced cement plaster on brick or concrete surfaces finishing the surface even and smooth without using extra cement and necessary scaffolding all as spd and directed |
| 171 | M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate as in surface channels and drains including rounded or chamferred on edges etc all as specified and directed. |
| 172 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate for surface channels, bed of drains incl forms/ moulds etc. all as specified. |
| 173 | PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed of NP-2 drain pipe 150 mm bore including packing under and completely surrounding the pipes after they are laid and tested complete all as specified and shown on drawings. |
| 174 | M & L 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars laid in trenches and jointes as specfified. |
| 175 | M&L for cement concrete type D2 (1:4:8) (using 40 mm graded stone aggregate) in foundations filling and mass concrete. |
| 176 | M&L for brick work in burnt brick with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified. |
| 177 | Providing and fixing SFRC (Steel Fibre Reinforced Concrete) cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to IS-12592, total weight of cover and frame to each be not less than 182 Kg, fixed in cement concrete 1: 2:4. |
| 178 | Providing orange colour safety foot rest minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dai steel bar conforming to IS : 1786 having minimum cross section as 23mmx 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2 mm tread on top surface by ribbing or chequerering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. |
| 179 | M & L for 15 mm thick ready mix sand faced cement plaster on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified. |
| 180 | M & L for 10 mm thick ready mix sand faced cement plaster on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified. |
| 181 | Cutting into existing manholes for connecting new drains internal dai of 150 mm bore NP-2 pipes, making good to pipe and rendering, cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished complete all as specified and directed. |
| 182 | M&L for Reinfoced Cement Concrete in nominal mix Type B0 1:2:4 (12.5mm graded aggregate) as in cover slabs supported to walls for Manhole to fixing of SFRC cover Haevy duty HD-20 grade designation) etc complete all as specified. |
| 183 | M&L for Mild steel bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to TMT Bar |
| 184 | Demolition and breaking up drain pipes of 150 mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 185 | M&L for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out |
| 186 | Dismatling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) |
| 187 | Dismantling of stone slabs and tiles of any description or any thickness in floors, aprons etc complete all as specified and directed. |
| 188 | M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone agg in sub base flooring complete all as specified & directed. |
| 189 | M&L for chequered cement concrete tiles 20cm x 20cm x 20mm thick with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors complete all specified and directed. |
| 190 | M&L for Machine pressed precast conctete interlocking paver block with gray cement and pigment or selected coloured or pattern any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade over 25mm thick sand cushioning including spreading and levelling complete all specified and directed. |
| 191 | Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in sof/loose soil complete all as specified. |
| 192 | M&L for PCC kerb stone providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete (Approx Size 300x300x100mm or as per site requirement) in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl form work weathering, slightly rounded or chamfered angles and throating all as specifed and directed |
| 193 | Returning, filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified. |
| 194 | Removing excavated Soil material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point |
| 195 | Dismantling fencing wire mesh any type complete all as specified and directed.. |
| 196 | Dismantling posts and struts (wood, steel or RCC) any section, including taking out embedded portion in concrete and making good disturbed ground complete all as specified and directed. |
| 197 | M&L cement concrete 1:3:6 type C 2, ( using 40 mm graded stone aggregate) as in foundation in filling and mass concrete complete all as specified and directed. |
| 198 | S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, wind ties, etc.; flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as directed. |
| 199 | Supply only chain link fencing any size or type complete all as specified and directed. |
| 200 | Fixing only chain link fencing including line wire, any mesh size and shape and type of any standard rails, straning bolts etc encluding provison of binding wire etc complete all as specified and directed. |
| 201 | MS screw bolts with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long 10 mm dia of bolts and nuts |
| 202 | Brick work in CM (1:6) with sub class 'B' bricks built in one brick thick with old bricks straight or curved on plain surfaces all as specified. |
| 203 | M&L for 15 mm thick ready mix external sand faced cement plaster on brick or concrete surfaces finished even and smooth w/o using any extra cement complete all as specified. |
| 204 | M&L two coats of cement base paint on new plastered wall surfaces over a coat of primer of any description including preparation of surfaces complete all as specified |
| 205 | M&L for framed work as in doors or ornamental and intricate design gates of angle or other section with gusset plates, rails, braces, including pintal etc. complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe-410- W(Gde- E-250) quality- B complete all as specified and directed. |
| 206 | E/M Portion |
| 207 | Supply, laying & testing of LT Cable XLPE insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross setional area of 35 Sqmm 4 Core Sizes complete |
| 208 | Supply, laying & testing of LT Cable XLPE insulated, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts, grade cross setional area of 25 Sqmm 4 Core Sizes complete |
| 209 | M&L for sand cushioning laid in trenches for laying of LT UG cables complete |
| 210 | M&L Modular bricks common burnt clay building bricks, sub-class ‘B’ designation-75 for LT UG cable protection complete all as spd and directed. |
| 211 | S&F GI pipe light grade 40 mm for cable protection, fixed to pole/ alongwall/ floor/ under road/ across the drain or nallaha etc of following sizes complete all as specified & directed. |
| 212 | M& L for boring holes (manually) under road ,hard standing,without damaging surface for 50 mm dia GI pipe etc complete all as specified and directed. |
| 213 | M&L in replacement Earthing complete with Galvanised iron earth plate electrode 600mm x 600mm x 6mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connected with galvanised earthing strip of size 25mm x 4mm by means of nuts, bots, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (reinforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not esceeding 50 Mtr etc all as shown on electrical plate No.3 of MES Schedule Part-I complete including taking down and testing on completion complete all as specified and as directed by the Engineer-in-Charge. |
| 214 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall as specified and directed by E-in-Charge. |
| 215 | M&L fabrication of MS busbar chamber of nominal dimension 600 mm x 600 mm x 450 mm duly provided with aluminimum busbar of size 50 mm x 6 mm duly wraped with RYB sleeves and fixed on porcelain insulators TPN type out door weather/vermin proof with both way opening with locking arrangement duly provided with neoprene rubber gasket along the doors openings pedestal type duly painted powder coated on CRCA steel sheet encloser 2 mm thick with one No incommer MCCB 250 Amp 25 KA incl making connection /thimbles including taking down old unserviceable busbar chamber complete all as sepcified and directed |
| 216 | Taking down carefully service connections of any description from pole, wall or service brackets etc including making good disturbed surface to match with the existing surface complete all as specified. |
| 217 | Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete |
| 218 | Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site all as specified and as directed by the Engineer in charge. |
| 219 | Taking down existing unserviceable submain wiring any size and making good the disturbed surface all as specified and as directed. |
| 220 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. but for one fan point controlled by one piano switch all as specified and as directed. |
| 221 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. but One light point controlled by two way switch |
| 222 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. but for one bell point controled by one bell push all as specified and as directed. |
| 223 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. but for one 3 pin socket outlet 5 Amp Same board. |
| 224 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. but for one 3 pin socket outlet 5 Amp independent. |
| 225 | Material and labour for point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed. but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire all as specified and as directed. |
| 226 | Supply and fix modular type switch, one way 6 Amps , 1 module complete all as specified and directed. |
| 227 | Supply and fix modular type switch, Two way 6 Amps , 1 module complete all as specified and directed. |
| 228 | Supply and fix modular type switch, one way 16 Amps, 1 module complete all as specified and directed. |
| 229 | Supply and fix modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed. |
| 230 | Supply and fix modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed. |
| 231 | Supply and fix in repairs of Ceiling rose surface bakelite three terminals 240 volts complete, all as specified. |
| 232 | Supply and fix in repairs Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , all as specified. |
| 233 | S&F LED Bulb cool white 10 Watt Elegant design direct fit for easy installation all as specified and directed. |
| 234 | Supply and fix in replacement of Bell push flush type piano 5 Amp complete, all as specified. |
| 235 | Supply and fix in replacement Bell Buzzer, Ding Dong 230 volt ,AC single pole complete all as specified. |
| 236 | S&F New Ac decrorative box type with driver, holder including LED tube light for glare free light with input power 20 Watt , system efficiancy not less than 120 lm/watt with built in surge protection not less than 2.0 KV with acessories like both side end cap, driver, holder,screw including LED light with three core flexible sheathed copper conductor cable of suitable size to connect with ceiling rose complete all as directed |
| 237 | S&F in replacement of LED light fitting mirror type with aluminum housing and polycarbonate diffuuser 2 feet ,10 watt 220V AC decorative type with acessories like both side end cap, driver, holder,screw including LED light with three core flexiblesheathed copper conductor cable of suitable size to connect with ceiling rose complete all as directed. |
| 238 | Supply and Fix in repairs PVC Deco type round light incl LED lamp 7 watt complete all as specified and directed. |
| 239 | Supply and fixing in repair vertical loadline sheet metal enclosure double door triple pole and neutral AC 415V , 4 Way with 200 Amps rated copper bushbar and IP-54 & K 09 protection with the inbuilt provision for fixing of 1 no MCCB 4 pole and 12 Nos MCBs inside the DB, with metal door and flush to wall including grounding and cutting in existing wall and making good disturbed surface with twocoats of white / colour washing/ distempering etcto match the existing complete all as specified and as directed. |
| 240 | S&F MCCB Triple pole and neutral 100 Amps 415 Volt curve 16 KA complete all as specified and directed by the Engr-in-Charge. |
| 241 | S&F, in repairs, sheet metal distribution board, TPN, 6 way 440 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, with 200 A tinned copper bus bar complete all as specified and directed. |
| 242 | S&F MCB Triple pole and neutral 40 Amps 415 Volt curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 243 | S&F MCB Triple pole 40 Amps 415 Volt curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 244 | Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified. |
| 245 | Supply and fix in repairs factory made epoxy powder coated Distribution board SPN 4 ways (SPN MCB DB) with metal double door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified. |
| 246 | Supply and fix in replacement MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified. |
| 247 | S&F MCB single pole and 240 volt 10 KA 63 Amp 'B' series conforming to ISI marked all as specified and directed . |
| 248 | Supply and fix in replacement of MCB SPN 63 Amp, 240 volts 50Hz AC supply, complete all specified. |
| 249 | Supply and fix in replacement of MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all specified. |
| 250 | S&F sheet steel enclosure with 20/25 Amp modular socket ,plug top and modular 20/25 A Modular MCB SP 10 KA& modular cover plate ( ready plug & play all-in-one device) complete all as specified by EIC. |
| 251 | Supply and fixed Rigit non-metallic PVC conduit of external dia 25mm exclusive of boxes (Junction/terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts saddles pipe hooks etc copmlete all as specified |
| 252 | S & F Sub main wiring with two single core cable PVC insulated cable with 4.0 Sqmm (Nominal area) multi stranded copper conductor cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of copper conductor of size 4.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduit with lock pattern incl. making good the disturbed surface complete.(Note : PVC conduit and its accessories including 2 runs of cable 4 sq mm & 1 run of earth continuity conductor cable 4 sq mm unsheathed shall be measured and paid as single unit). |
| 253 | S & F Sub main wiring with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 2 runs of cable 6 sq mm & 1 run of earth continuity conductor cable 6 sq mm unsheathed shall be measured and paid as single unit). |
| 254 | S & F Sub main wiring with Four single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 4 runs of cable 6 sq mm & 1 run of earth continuity conductor cable 6 sq mm unsheathed shall be measured and paid as single unit). |
| 255 | Supply and Fixing of electric chimney with autoclean function 750mmx500mmx550mm (width) dimensions having suction power of inlets 1300 Cum/hrs, motor warrany 3 years with power onsumption 180W, 230V, 50Htz having 3 speed gesture movement in black coated CRCA material and to be installed with proper aluminium pipe suitable size length as recommended by manufacturers from electric chimney to outside of bldg. Make :- HINDWARE, Model – Hindware Atlanta 75 Silence Auto Clean or equivalant in Crompton / Faber |
| 256 | Supply and fixing LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 257 | S&F indoor decorative LED City-3 light fitting suitable for & including single 12 Watt LED lamp with polycarbonate body with upper globe complete all as specified and directed. |
| 258 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1400, Copper winding of sweep 250mm. Note:(1) Rate for taking down, trasportaion & deposit at E/M storeyard of old exhaust fan & making hole in wall/Window of suitable size for fixing exhaust fan are deemed to be incuded in this rate. |
| 259 | S&F exhaust fans complete with Blades,frames & louvers etc with steel body AC single phase 230 V of size 300 mm sweep with Air delivery not less than 1710 CMH and speed not less than 1400 RPM with double ball bearing ,100% copper winding motor all as specified by EIC . Note:(1) Rate for taking down, trasportaion & deposit at E/M storeyard of old exhaust fan & making hole in wall of suitable size for fixing exhaust fan are deemed to be incuded in this rate. |
| 260 | M&L for cutting of suitable size of holes for 300 mm exhaust fan in wall and grouting of nuts and bolts in wall and making good to match with existing walls all as specified and directed by Engr-in-Charge. |
| 261 | Taking down electric enerty meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface all as specified and directed by Engr-in-Charge. |
| 262 | Taking down carefully ceiling fan from existing site any make and sweep and deposited to MES store yard all as specified and directed by Engr-in-Charge) |
| 263 | Supply and fixing ceiling fans complete with Aluminium blades, modular fan regulator and accessories, 230 V, 1200 mm sweep.with and including Anti Suicide Fan Rod of suitable size and length Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and directed by Engr-in-Charge. |
| 264 | S& F GI tubing 50 mm bore heavy grade ISI marked for fixing on walls including PCC 1:3:6 type C-1 for grouting ends of pipe & all fittings for hanging of Ceiling fans complete all as directed. |
| 265 | M&L for fan hook made out of MS flat 50x6 mm suitably shaped to mount on 40 mm dia GI pipe including welded MS bar 10 mm dia half round shaped & necessary nuts & bolts complete all as directed. |
| 266 | Dismentaling and taking down Geyser any make and cap by disconnecting all electrical and water supply connection and depositing to MES store yard. |
| 267 | S&F electric water heater storage type ABS outer body and glass line coated inner tank suitable to withstand 8 bar pressure and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with LED temp Indicator and integrated shock safe plug complete with all accessories such as safety valve, thermostate, NRV, Fixing bolts, stainless steel braided connection piece 450 mm long etc as specified. |
| 268 | Supply and fixing 3 pin 15/16 Amp plug top suitable for 240V 50Hz AC supply.all as specified and directed.for invertor |
| 269 | S&F single core PVC insulated copper conductor 1 Sqmm 1100 v drawing in extisting point wiring for invertor |
| 270 | Note: Tenderer may note that amount of credits will be deducted from the total amount arrived at the time of acceptance of contract Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 26 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 33 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender