Tender For Interior And Electrical Work For New Administrative Office Of Kolhapur Zilha Grampanchayat Adhikari Sahakari Pat Sanstha Ltd. Kolhapur.
Tender Value
52.71 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
1 days left
EMD
53000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolhapur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Interior And Electrical Work For New Administrative Office Of Kolhapur Zilha Grampanchayat Adhikari Sahakari Pat Sanstha Ltd. Kolhapur.
BOQ
| Sl. No. | Item Description |
| 1 | Second floor-Banking Hall |
| 2 | CHAIRMAN/ VICE CHAIRMAN |
| 3 | Full height partition Providing and fixing solid full height partitions as per drawing made out of 2\\" X 2\\" X 1.5\\" thick Plywood section frame work @ 600mm c/c both ways Horizontally and Vertically. The vertical alternate frames to be fixed to the ceiling with necessary fixtures. The framing shall be finished with 8 mm thk. BWR Grade IS 303 confirmed plywood panelling on both sides with approved make 1mm thick laminate . The skirting should be as per approved make 1mm thick laminate as per drawing and direction. The rate is including all necessary fitting and fixtures gluing material and other hardware incluiding cleaning, The necessary openings in the partitions shall be provided for Electrical Conduits, Electrical Switches, Light Fixtures, Painting, Fire Detectors, etc complete. As per detailed drawing given by Architect / instructions given by Architect on site etc. complete. |
| 4 | Chairman table Providing & fixing Chairman Manager Table 8'0\\" x 2'6\\" x 2'6\\" with 2 nos drawer unite below of 1'6\\" X 1'9\\" X 2'3\\" made out of in 19 mm thk. BWR Grade IS 303 confirmed plywood frame work for table and side table tops, sides, apron, shelves and finish with 1 mm thk approved make laminate.Top surface wil be Corian material colour / Shade will be approved by architect. 1 no. Shelf for CPU to be provided below the desk as shown in the drg. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19mm thk BWR Grade IS 303 confirmed ply base and 25 x 50mm round edged moulding on the front fixed with telescopic/double approved sliders. A drawer unit as shown in the drg shall be provided. 3 nos of drawers with 1 mm thk approved make laminate shall be provided. Height of drawers shall be 100mm, 100mm and 280mm. |
| 5 | Premium Executive chair |
| 6 | Visitor chair |
| 7 | Panneling Providing and fixing of wall pannelling as per design in 8 mm thk plywood of approved make and framming in 19mm thk plywood with 1mm thk laminate finished as per approved shade and design including cleaning. etc (Design/ Shade as per Architect approval ) |
| 8 | Low height Storage Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 8mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, 150mm Stainless Steel Tower bolts at top and Bottom Magnetic Ball Catches etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete. |
| 9 | Decorative wall paper Providing and fixing wall paper as per architect seletion ( Basic rate -80-85 /sq.ft) |
| 10 | Leadge and box for display Providing and fixing display 3 no display box of 19 mm thk ply for display and 50 mm thk leadge of 12\\" depth with laminate finish as per the approved by architect. |
| 11 | Door with vision panel Providing & Fixing solid double core flush door made out of 32mm thick approved of Solid double Core waterproof marine grade Flush Door along with approved make/color 1.00 mm thick laminate from both side and Vision panel of 8mm thk glass and 6mm thick teak wood edge beading. The edge of the Doors / Shutters frame at edge finish with melamine polish of laminate matching shade along with approved make / design hardware i.e. Concealed Door Closure, 5\\" brass railway hinges, Stainless Steel Handles, Locks, Signage's, Name Plate with necesasry hardware i.e. Sheet Metal Screws, Nails, Fevicol etc. complete Note.:as per detailed drawing given by Architect / instructions given by Architect on site etc. complete. |
| 12 | BRANCH MANAGER |
| 13 | Semi transparent full height partition Providing and fixing partly glazed full height partitions as per drawing made out of 2\\" X 2\\" X 1.5mm thick Aluminum Tubular section frame work @ 600mm c/c both ways Horizontally and Vertically. The vertical alternate frames to be fixed to the ceiling with necessary fixtures. The framing shall be finished with 8 mm thk. BWR Grade IS 303 confirmed plywood panelling on both sides with approved make 1mm thick laminate . And partition shall have 8mm thick plain glass above 3'-0\\" in height on partition or as per detail drawing. Glass shall be fix with 1 1/2\\" X1 1/2\\" laminate matching color teak wood beading finished with melamine polish or as per directed etc. The skirting should be as per approved make 1mm thick laminate as per drawing and direction. The rate is including all necessary fitting and fixtures gluing material and other hardware incluiding cleaning, The necessary openings in the partitions shall be provided for A.C. Grill, Electrical Conduits, Electrical Switches, Light Fixtures, Painting, A.C. Opening, Running display Speaker, Fire Detectors etc complete. Note.:as per detailed drawing given by Architect / instructions given by Architect on site etc. complete. |
| 14 | Door with vision panel Providing & Fixing solid double core flush door made out of 32mm thick approved of Solid double Core waterproof marine grade Flush Door along with approved make/color 1.00 mm thick laminate from both side and Vision panel of 8mm thk glass and 6mm thick teak wood edge beading. The edge of the Doors / Shutters frame at edge finish with melamine polish of laminate matching shade along with approved make / design hardware i.e. Concealed Door Closure, 5\\" brass railway hinges, Stainless Steel Handles, Locks, Signage's, Name Plate with necesasry hardware i.e. Sheet Metal Screws, Nails, Fevicol etc. complete Note.:as per detailed drawing given by Architect / instructions given by Architect on site etc. complete. |
| 15 | Branch Manager table Providing & fixing Manager Table 5'6\\" x 2'6\\" x 2'6\\" made out of in 19 mm thk plywood. BWR Grade IS 303 confirmed plywood frame work for table and side table tops, sides, apron, shelves and finish with 1 mm thk approved make laminate.Top surface wil be Corian material colour / Shade will be approved by architect. 1 no. Shelf for CPU to be provided below the desk as shown in the drg. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19mm thk BWR Grade IS 303 confirmed ply base and 25 x 50mm round edged moulding on the front fixed with telescopic/double approved sliders. A drawer unit as shown in the drg shall be provided. 3 nos of drawers with 1 mm thk approved make laminate shall be provided. Height of drawers shall be 100mm, 100mm and 280mm. |
| 16 | Side storage Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 6mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete. |
| 17 | Notice board Providing & fixing notice board with 12 mm ply for back side & 12 mm thk. soft board fix in 1” x ¾” T.W. leaping & cover with cotton cloth approved by consultant etc |
| 18 | Executive chair |
| 19 | Visitor chair |
| 20 | Banking area |
| 21 | Cleark table Providing & fixing Table 4'0\\" x 2'6\\" x 2'6\\" with 1 drawer unite below of 1'6\\" X 1'9\\" X 2'3\\" made out of in 19 mm thk (As per the detail drawing). BWR Grade IS 303 confirmed plywood frame work for table and side table tops, sides, apron, shelves and finish with 1 mm thk approved make laminate . 1 no. Shelf for CPU to be provided below the desk as shown in the drg. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19mm thk BWR Grade IS 303 confirmed ply base and 25 x 50mm round edged moulding on the front fixed with telescopic/double approved sliders. A drawer unit as shown in the drg shall be provided. 3 nos of drawers with 1 mm thk approved make laminate shall be provided. Height of drawers shall be 100mm, 100mm and 280mm. |
| 22 | Cash counter Providing & fixing Chairman Manager Table 5'0\\" x 2'6\\" x 2'6\\" with 2 nos drawer unite below of 1'6\\" X 1'9\\" X 2'3\\" made out of in 19 mm thk. BWR Grade IS 303 confirmed plywood frame work for table and side table tops, sides, apron, shelves and finish with 1 mm thk approved make laminate . 1 no. Shelf for CPU to be provided below the desk as shown in the drg. All the inner surfaces shall be finshed with 0.8 mm thick white laminate. 1no. Computer key board tray as per architects design using 19mm thk BWR Grade IS 303 confirmed ply base and 25 x 50mm round edged moulding on the front fixed with telescopic/double approved sliders. A drawer unit as shown in the drg shall be provided. 3 nos of drawers with 1 mm thk approved make laminate shall be provided. Height of drawers shall be 100mm, 100mm and 280mm. |
| 23 | Executive chair |
| 24 | Visitor chair |
| 25 | Mesh Visitor chair |
| 26 | Writing desk Providing and Fixing wall mounted writing table as per design. The top and central partitions should be with 19mm thick BWR Grade IS 303 confirmed ply rear and sides fixed to the wall. The bottom ply piece to be supported additionally with 2 Nos. of SS Brackets. Writing top finish in 1 mm thk laminate of approved make. The exposed faces should be finished with 1 mm thick approved laminate and the edges of ply wood to be finished with 1 mm thick approved laminate. As per detailed drawing given by Architect / instructions given by Architect on site etc. complete. |
| 27 | Low height partition Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 6mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, 150mm Stainless Steel Tower bolts at top and Bottom Magnetic Ball Catches etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete. |
| 28 | Decorative pannel Providing and fixing of wall pannelling as per design in 8 mm thk plywood of approved make and framming in 19mm thk plywood with Lovered finished laminate as per approved shade and design including cleaning. etc (Design/ Shade as per Architect approval ) |
| 29 | Half height swing door |
| 30 | Side storage Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 6mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete. |
| 31 | General work |
| 32 | Rolling blinds Providing and fixing in position blinds. With imported fittings heavy duty powder coated of approved coloured fabric including Top aluminum anodized rail of 1.4 mm thick wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. chord, locks, painted Tilt rod etc. completed. As per drawing given by Architect / instructions given by Architect on site etc. complete. (Basic rate of Fabric Rs.100/- Rmt.) |
| 33 | Gypsum Ceilling work Providing and fixing suspended false ceiling consisting of 12.5mm thick Gypsum plaster board suspended on GI framework. GI framework to consist of GI perimeter channels 0.55mm thick 20mm x 30mm along perimeter of false ceiling of ceiling, screw fixed to wall/partition with nylon sleeves and screws @ 600mm c/c. Suspending GI intermediate channels of size 0.9mm thick 45mm x 15mm from the soffit at max dist 1220mm c/c with ceiling angle 0.55mm thick 25mm x 10mm fixed to soffit using proprietary supplied GI cleats and steel expansion fasteners. The boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edge of the boards with jointing compound & joint paper tape. Rate shall be inclusive of Cut outs for A/c machiness, spot lights, light fixtures, A/C. Grills, fire and security systems cut outs, All Sections should adhere to the manufacturers guidelines. Vertical sides visible will be measured. Note.:as per detailed drawing given by Architect / instructions given by Architect on site etc. complete |
| 34 | Ceilling edges Providing and fixing Gypsum edge as per the deisgn with support of GI channel with plain base behind the edge were indirect light will be provided. |
| 35 | Wooden Baffel ceilling Providing and fixing wooden batten ceilling, with dry wooden of size 1.5\\" X 3\\" suspended from slab with natural look polished as per architect approval. |
| 36 | Luster Painting work Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. |
| 37 | Third floor-(Conference Hall) |
| 38 | Gypsum Ceilling work Providing and fixing suspended false ceiling consisting of 12.5mm thick Gypsum plaster board suspended on GI framework. GI framework to consist of GI perimeter channels 0.55mm thick 20mm x 30mm along perimeter of false ceiling of ceiling, screw fixed to wall/partition with nylon sleeves and screws @ 600mm c/c. Suspending GI intermediate channels of size 0.9mm thick 45mm x 15mm from the soffit at max dist 1220mm c/c with ceiling angle 0.55mm thick 25mm x 10mm fixed to soffit using proprietary supplied GI cleats and steel expansion fasteners. The boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edge of the boards with jointing compound & joint paper tape. Rate shall be inclusive of Cut outs for A/c machiness, spot lights, light fixtures, A/C. Grills, fire and security systems cut outs, All Sections should adhere to the manufacturers guidelines. Vertical sides visible will be measured. Note.:as per detailed drawing given by Architect / instructions given by Architect on site etc. complete |
| 39 | Ceilling edges Providing and fixing Gypsum edge as per the deisgn with support of GI channel with plain base behind the edge were indirect light will be provided. |
| 40 | Wooden ceilling Provding and fixing wooden ceilling of 18 mm thk playwood with laminate finished as per the designing, Plywood fixtation on SS square pipe of 2\\" X 2\\" from slab ass per the detailed showned in the drawing. The rate is including all necessary fitting and fixtures gluing material and other hardware incluiding cleaning, The necessary openings in the Ceilling shall be provided for A.C. Grill, Electrical Conduits, Electrical Switches, Light Fixtures, Painting, A.C. Opening, Running display Speaker, Fire Detectors etc complete. Note.:as per detailed drawing given by Architect / instructions given by Architect on site etc. complete |
| 41 | Storage Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 6mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete. |
| 42 | Panneling Providing and fixing of wall pannelling as per design in 8 mm thk plywood of approved makeand framming in 19mm thk plywood with 1mm thk laminate finished as per approved shade and design including cleaning. etc (Design/ Shade as per Architect approval ) |
| 43 | Conference table Providing & fixing Conference Table 20'0\\" x 9'0\\" x 2'6\\" with made out of BWR Grade IS 303 in 19 mm thk plywood. With vertical support at 2'3\\" interval. Coference front side and rear side will be 12mm thk ply finish from top to bottom with laminate finish.The rate is including all necessary fitting and fixtures gluing material and other hardware incluiding cleaning, The necessary openings in the partitions shall be provided for A.C. Grill, Electrical Conduits, Electrical Switches, Light Fixtures, Painting, A.C. Opening, Running display Speaker, Fire Detectors etc complete. Note.:as per detailed drawing given by Architect / instructions given by Architect on site etc. complete. |
| 44 | Screen ledge Providing and fixing 40mm thk ledge below screen of 19 mm thk double ply with laminate finish |
| 45 | Premium Executive chair |
| 46 | Executive chair |
| 47 | Luster Painting work Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. |
| 48 | Rolling blinds Providing and fixing in position blinds. With imported fittings heavy duty powder coated of approved coloured fabric including Top aluminum anodized rail of 1.4 mm thick wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. chord, locks, painted Tilt rod etc. completed. As per drawing given by Architect / instructions given by Architect on site etc. complete. (Basic rate of Fabric Rs.100/- Rmt.) |
| 49 | Decorative wall paper Providing and fixing wall paper as per architect seletion ( Basic rate -80-85 /sq.ft) |
| 50 | Full height storage Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 6mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, 150mm Stainless Steel Tower bolts at top and Bottom Magnetic Ball Catches etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete. |
| 51 | Woolen Carpet Providing and fixing the woolen carpet of Hego make. Before installation of carpet the surface should be clean and inspection by representaative of bank / Architect and properly installed |
| 52 | Fourth floor-(Guestrooms) |
| 53 | Gypsum Ceilling work Providing and fixing suspended false ceiling consisting of 12.5mm thick Gypsum plaster board suspended on GI framework. GI framework to consist of GI perimeter channels 0.55mm thick 20mm x 30mm along perimeter of false ceiling of ceiling, screw fixed to wall/partition with nylon sleeves and screws @ 600mm c/c. Suspending GI intermediate channels of size 0.9mm thick 45mm x 15mm from the soffit at max dist 1220mm c/c with ceiling angle 0.55mm thick 25mm x 10mm fixed to soffit using proprietary supplied GI cleats and steel expansion fasteners. The boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edge of the boards with jointing compound & joint paper tape. Rate shall be inclusive of Cut outs for A/c machiness, spot lights, light fixtures, A/C. Grills, fire and security systems cut outs, All Sections should adhere to the manufacturers guidelines. Vertical sides visible will be measured. Note.:as per detailed drawing given by Architect / instructions given by Architect on site etc. complete |
| 54 | Ceilling edges Providing and fixing Gypsum edge as per the deisgn with support of GI channel with plain base behind the edge were indirect light will be provided. |
| 55 | Bed Providing and fixing bed with bed back with coushing as per the details |
| 56 | Matteress / coushing |
| 57 | Cupboard Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 6mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, 150mm Stainless Steel Tower bolts at top and Bottom Magnetic Ball Catches etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete. |
| 58 | Low Height Storage Providing and fixing storage units of full/ low height as per drwng. They shall consist of 19mm thk. BWR Grade IS 303 confirmed ply top, sides, bottom, shelves and shutters & 6mm thk BWR Grade IS 303 confirmed ply for back. The bottom of the storages shall be at 75mm from FFL. The shutter with teak lipping finished approved 1 mm thk laminate/ edge bidding on all the shutter edges. Division of the shutters shall be made equally according to the length of the storages ( as approved by Bank/ architect). All the external surfaces shall be finished with 1.0 mm thk laminate of approved make. 19mm thk. BWR Grade IS 303 confirmed Ply shelves at 16” interval ( approximately / divided equally) shall be provided. All inner surfaces shall be finished with 0.8 mm thk laminate including the shutters. Rate shall be inclusive of all necessary approved fittings like hardware i.e. Stainless Steel Lock, Stainless Steel L/ W Hinges with Stainless Steel Bearing (AISI 316 Grade) & Stainless Steel Pin (AISI 316 Grade),Stainless Steel Brush Finished Handles, 150mm Stainless Steel Tower bolts at top and Bottom Magnetic Ball Catches etc. complete as per delailed drawing given by Architect / instructions given by Architect etc. complete. |
| 59 | Luster Painting work Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. |
| 60 | Rolling blinds Providing and fixing in position blinds. With imported fittings heavy duty powder coated of approved coloured fabric including Top aluminum anodized rail of 1.4 mm thick wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. chord, locks, painted Tilt rod etc. completed. As per drawing given by Architect / instructions given by Architect on site etc. complete. (Basic rate of Fabric Rs.100/- Rmt.) |
| 61 | Terrace Garden |
| 62 | Terrace Garden chair setup @ Fourth floor |
| 63 | Landscaping such as plants and decorative pots |
| 64 | Artifacts & Decorative Showpieces |
| 65 | Eletrical work |
| 66 | SITC of light point with 1sqmm X 2 nos wire including required switch, box, plate, pipe and accessories in complete. |
| 67 | SITC of ceiling fan point with 1sqmm X 2 nos wire including required switch, box, plate, step regulator, pipe and accessories in complete. |
| 68 | SITC of 6A separate socket point including required switch, box, plate, pipe and accessories in complete |
| 69 | SITC of 6A onboard socket point including required switch, box, plate, pipe and accessories in complete. |
| 70 | SITC of power point in 2.5 sqmm wires and 16 amp switch , socket and material in complete. |
| 71 | SITC of AC point 4.0sqmm wires and 16 amp switch , socket and material in complete |
| 72 | SITC of light circuit with1.5sqmm X 2 nos + 1.0 sqmm X 1 no with 10A SP MCB |
| 73 | SITC of power circuit with 2.5sqmm X 2 nos + 1.0 sqmm X 1 no with 16A/20A SP MCB |
| 74 | SITC of AC circuit with 4.0sqmm X 2 nos + 1.0 sqmm X 1 no with 16A/20A SP MCB |
| 75 | SITC of wire running 1.5 sq.mm.X2 Nos +1 sq.mm. X1 No wire running with all required pipe and accessories in complete |
| 76 | SITC of wire running of 2.5 sq.mm.X2 Nos +1 sq.mm. X1 No wire running with all required pipe and accessories in complete |
| 77 | SITC of wire running of 4.0 sq.mm.X2 Nos +1 sq.mm. X1 No wire running with all required pipe and accessories in complete |
| 78 | SITC of 15watt downlight fittings |
| 79 | SITC of 7/10watt downlight fittings |
| 80 | SITC of ceiling fans |
| 81 | SITC of wall washers |
| 82 | SITC of LED strip |
| 83 | SITC of 20/10watt tubset |
| 84 | SITC of mirror fitting |
| 85 | SITC of profile for LED strip |
| 86 | SITC of 8 way TPN DB |
| 87 | SITC of 4 way TPN DB |
| 88 | SITC of 16 way SPN DB (UPS) |
| 89 | SITC of 63 A FP RCCB as main incomer for 8way TPN DB |
| 90 | SITC of 40A DP MCB as main incomer for 16way SPN DB for inverter circuits |
| 91 | SITC of 1'X1' plate type earthing excluding excavation |
| 92 | SITC of 12 SWG copper bare conductor |
| 93 | SITC of 100A / 125A FP MCCB with enclosure in complete. |
| 94 | Ceilling in the Entrance lobby |
| 95 | Camera |
| 96 | Invertor with battery backup { 4.5 KW capacity } |
| 97 | SITC of 2 MP camera |
| 98 | SITC of 16 channel DVR |
| 99 | SITC of 8 port SMPS for camera |
| 100 | SITC of 2TB hard disk for DVR camera system |
| 101 | SITC of 3+1 / Cat 6 Camera Cable for camera & Sensors with required pipe and accessories in complete |
| 102 | SITC of Screens of 40\\" for operating camera display |
| 103 | Networking |
| 104 | SITC of wall mount rack with standard accessories in complete. |
| 105 | SITC of 24port gigabyte networking switch |
| 106 | SITC of 24 port patch panel with accessories in complete |
| 107 | SITC of IO with faceplate with accessories in complete. |
| 108 | SITC of Cat 6 cable for networking with required pipe and accessories in complete |
| 109 | SITC of Cat6 patch chord 1 meter in complete |
| 110 | SITC of burglar alarm system |
| 111 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender