Tender For Interior Renovation Of B Block 1St Floor In Regional Office Building Including Civil, Interior, Mep, Hvac, Electrical & Allied Works At Reserve Bank Of India (Rbi), Raipur
Tender Value
3.57 Crore
Estimated cost
Bid Submission
04 Nov 2026
13 days left
EMD
7.15 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raipur → Chhattisgarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Interior Renovation Of B Block 1St Floor In Regional Office Building Including Civil, Interior, Mep, Hvac, Electrical & Allied Works At Reserve Bank Of India (Rbi), Raipur
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL AND INTERIOR WORKS1.1 Charges for Carefully Breaking and Removing following items of any size, at any level, without any damage to adjacent structure/wall as directed by the Banks Engineer. Rate to quoted including carting away the debris including loading, unloading, transport, mathadi charges etc. complete. Contractor to pack the debris properly in bags and shift from site to downstairs up to debris location (assigned as Banks Location) without making any nuisance to the Bank Staff. Contractor to clean the area after the completion of work. Contractor has to remove the debris time to time and dump at municipal dumping yard as directed by Bank's Engineer. 1.1.1 Block masonary work including plaster, lintel, patli etc. complete.1.1.2 All Types of Flooring including bedding, carpet, skirting, Dado, wash basin, platform, counters, waterproofing, coba, PCC below floor up to parent slab etc.1.1.3 All Types of Walls of any size, at any level including patli, lintel, Brick masonary work, Partitions(frame+claddings) including suspenders of any material, plaster behind tile after removal, Gypsum sheets, Putty, Patli etc. 1.1.4 All types of Cladding at any level, Panels of any material, Wallpaper, Mouldings, Framings etc.1.1.5 All Door Frames, Shutters, all Hardware's of any type, storage units, lintels etc.1.1.6 All Existing Plumbing supply lines (Concealed/Exposed), Fire Fighting Lines (Concealed/Exposed), piping's, valves, fittings, fixtures etc.1.1.7 All HVAC units, ducts, pipes, cables, drain pipes etc. of any diameter, dampers etc. as directed by the Banks engineer.1.1.8 All Electrical Services items such as wires, Cable, Fittings such as DB Board, Sockets, Lights etc. as directed by the Banks engineer.1.1.9 Complete Auditorium including walls, panels, framing, stage, flooring, carpet, MS structure for Steps, Stage, Ramp etc. 1.1.10 Gypsum, False ceiling with framing |
| 2 | 1.2 Making Cutout of size in existing wall for doors as per new layout Rate to quoted including carting away the debris including loading, unloading, transport, mathadi charges etc. complete. Contractor to pack the debris properly in bags and shift from site to downstairs up to debris location (assigned as Banks Location) without making any nuisance to the Bank Staff. Contractor to clean the area after the completion of work. Contractor has to remove the debris time to time and dump at municipal dumping yard as directed by Bank's Engineer. |
| 3 | 2..1 Half brick masonary - Providing and constructing half brick masonary walls with locally available best quality common burnt clay F.P.S. (non modular) bricks in superstructure in C.M. 1:3 (1 cement: 3 Coarse sand) including providing proper key to the adjoining structure, raking the joints, curing, cleaning, carting away debris if any outside the Bank's premises. |
| 4 | 2.2 Brick masonary - Providing and constructing approx 225mm thick brick masonary walls with locally available best quality common burnt clay F.P.S. (non modular) bricks in superstructure in C.M. 1:4 (1 cement: 4 Coarse sand) including providing proper key to the adjoining structure, raking the joints, curing, cleaning, carting away debris if any outside the Bank's premises. |
| 5 | 2.3 RCC Lintel - Providing and constructing RCC Lintel of approx. size 110mm x 150mm in M25 Grade concrete with Anchorage of minimum approx. 150mm on either side of the lintel in Wall/RCC. The lintel to be reinforce with nominal (4 No's of 10mm Dia with 8mm stirrups at 200mm c/c) reinforcement using Fe500, including necessary centering, supports etc. as required and as directed. The rate to be quoted including necessary reinforcement. |
| 6 | 2.4 Cement Plaster - Providing and applying approx. 12 mm thick (average) ready mixed cement plaster in CM 1:4, complete as per manufacturer's specifications and direction at all heights and levels. rates is inclusive of providing and mixing approved fibre reinforcing material as per manufacturers specification in cement mortar etc. complete at all heights, levels and locations. The rates shall also include moulding and grooves wherever specified, scaffolding, curing, and masonry or any dissimilar materials etc. all complete as per technical specifications, drawings & as directed by the Banks Engineer. The rate shall also include providing and fixing 200mm width glass fibre mesh (145 gsm) at junctions of column/beam and walls, before plastering the junction with cement/gypsum plaster as directed. The mesh shall be nailed rigidly to the masonry with G.I. nails of suitable type at approx. 400 mm centre to centre. |
| 7 | 2.5 Anti termite treatment - Providing and applying Post Constructional anti termite treatment by drilling holes to the walls near junction of floor and walls at distance of approx. 300mm c/c to the perimeter of the floor internally, surroundings of pipes, conduits to external wall etc. injecting the chemical and sealing the hole with white cement as per approved manufacturer’s instructions and recommendation, and installed by manufacturer’s approved agency with a guarantee of 10 years in writing on Rs. 100 /- Stamp paper for treated areas ,in a approved format, all to the satisfaction of the Banks Engineer. Contractor to appoint approved Anti- termite treatment agency. (Plan area of respective floor to be measured & paid for). |
| 8 | 3.1 PU Coating - Providing and applying single component Polyurethane resins bonded elastomeric waterproofing liquid membrane with chemical, properties on top of well prepared parent concrete surface in three coats. One coat of self-priming of Polyurethane resines bonded elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted Polyurethane resines bonded elastomeric waterproofing liquid at a consumption rate of 500 gm per square metre per coat with brush/roller application. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect finish as per the manufacturers specifications and as directed by the Bank`s Engineer. (The coating shall be done on walls upto 600mm above the floor level and Sunken area 600mm below floor level ) Mode of Measurement - Application plain surface Area (floor and walls) should be measured and paid for. |
| 9 | 3.2 Waterproof Cement Plaster - The top surface of the PU coating shall be applied with average 15 mm thick waterproof cement plaster in mortar 1:3 admixed with waterproof chemical compound from approved manufacturer equivalent as per manufacturer`s specification, curing, etc. complete all as directed by the Bank`s Engineer. Sunken portion shall be tested by ponding water for at least three days so as to ensure no leakages/seepages of water from the bottom of the slab. |
| 10 | 3.3 Brickbat Coba - Providing, laying and filling sunken area of toilet block with well burnt bricks or sliced brick bats of approved size in required layers in cement mortar 1:4 (1 Cement : 4 coarse sand) mixed with approved waterproofing compound as per manufacturer's specifications including proper curing etc. complete all as directed by the Bank`s Engineer. Mode of Measurement - Actual Volume of the Brickbat should be measured and paid for. |
| 11 | 4.1 Cladding, Skirting and Jambs - Providing and fixing machine cut, mirror/ eggshell polished , minimum 18mm thk marble (tolerance +/- as per the relevant IS Code) work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern. If required with marble stone slab pieces of different shapes, shades and texture but of even thickness., on 12 mm (average) thick cement mortar 1:3 (1 white cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Banks Engineer.Marble thickness to be minimum 18mm thk (tolerance +/- as per the relevant IS Code) Lift Jamb - Basic Rate italian Marble is Rs 7535/-Smt excluding GST. |
| 12 | 4.2 Providing and fixing approx. 600mm deep/wide Wash basin counter with top made of approx. 20 mm thick pre-polished quartz slab as per drawing. Quartz shade, sample as approved by Banks Engineer shall be laid on carcass of waterproof ply. Providing front fascia finished in pre-polished Marble/Quartz of height approx. 50mm as per drawing. Front fascia below counter top is made with framework using Aluminium box sections of approx. size: 25mm x 50mm x 2mm, spaced approx. 400mm c/c both way, cladded with 18mm thk BWP ply with balancing laminate pasted using approved adhesive and ready to receive the necessary finishing material as per drawing. Cost to include making necessary cut-outs for wash basin, Piller cock and pipes through counter top including moulding, rubbing polishing of cut edges etc. as per drawing. All exposed edges of finishing material to be champhered/moulded, and machine polished to give high gloss finish etc as per drawing. Joints to be sealed and made water tight using clear sealant of approved make wherever required. (Note: Only Plan Area will be measured for Payment). (Basic rate of Quartz stone : 9688/- per Sqm excluding GST.) |
| 13 | 4.3 Providing and fixing approx. 600mm working counter with top made of approx. 20 mm avg thick pre-polished quartz slab as per drawing. Quartz shade, sample as approved by Banks Engineer shall be laid on carcass of waterproof ply. Providing front fascia finished in pre-polished Marble/Quartz of height approx. 50mm as per drawing. Front fascia below counter top is made with framework using Aluminium box sections of approx. size: 25mm x 50mm x 2mm, spaced approx. 400mm c/c both way, cladded with 18mm thk BWP ply with balancing laminateavg 0.8 mm thk pasted using approved adhesive and ready to receive the necessary finishing material as per drawing. Working Counter in Pantry - 600mm. (Basic rate of Quartz stone : 5000/- per Sqm excluding GST.) |
| 14 | 4.4 Vitrified tile Flooring - Providing and laying approx 8mm thick Vitrified tiles of 600*1200 mm/800*1600 mm in floor in different sizes (thickness to be specified by the manufacturer), of approved brand & manufacturer, in all colours and shade, laid on adhesive and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily by using spacer 3 to 4 mm ,if required etc. complete as directed by Banks Engineer. Rate to be quoted including covering the floor using polypropylene protective sheet. Basic rate of Vitrified tile : Rs 861/- Per Sqmt excluding GST. |
| 15 | 4.4.1 Same as above 4.4 fixing of skirting of 75 mm vitrified tiles Basic rate of Vitrified tile : Rs 861/- Per Sqmt excluding GST. |
| 16 | 4.5 Vitrified Dado - Providing and fixing approx 8mm thick Vitrified wall tiles 600*1200 mm of approved make, of approved colour, shades, of any size as approved, in skirting, risers of steps and dados, with adhesive and pigment of matching shade complete. Basic rate of Vitrified tile : Rs. 861/- Per Sqmt. excluding GST. |
| 17 | 4.6 Ceramic Flooring - Providing and laying approx 8mm thick Ceramic Glazed tiles on floor in different sizes (thickness to be specified by the manufacturer), of approved brand & manufacturer, in all colours and shade, laid on adhesive and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily etc. complete as directed by Banks Engineer. Rate to be quoted including covering the floor using polypropylene protective sheet. Basic rate of ceramic tile : Rs. 807/- Per Sqmt excluding GST. |
| 18 | 4.7 Carpet - Supply & Installation of Approx 12mm thick Carpet roll/tile of approved make, shade, texture and 0.25 mimimum NRC , to be fixed with approved adhesive as per the manufacturers specifications and as per design pattern as per drawing. The Rate shall also inclusive of necessary wastage , installation, adhesive , including covering the carpet floor using polypropylene protective sheet till handing over to the client. Basic Price of Carpet is 2691/- per Sqmt excluding GST. |
| 19 | 4.8 Wooden Flooring - Providing and laying in position 8mm thick Engineered wooden Flooring of approved make, shade and size as approved by Banks Engineer, laid on the smooth floor surface and laying the planks as per manufacturers specifications etc. complete. Contractor to protect the floor till handing it over to the Banks Engineer. Preparing base to receive the wooden flooring, underlay of 2mm thick foam with PVC sheet and end profile as per the flooring levels as recommended by manufacturer. In case if floor is damaged by any way or by other agencies working there, contractor has to replace the damaged floor/plank at no extra cost to the Client as directed by Banks Engineer. Rate to include necessary wastage, under layer, handling, laying in pattern as per drawing, adhesive, protecting till handing over using polypropylene protective sheet etc. complete. Rate to include self levelling coat to levelled the surface using POP OR equivalent as required. Only the laid area of flooring will be measured and paid. Basic Rate of wooden flooring - Rs. 2153/- Per Smt excluding GST. |
| 20 | 4.9 Wooden Skirting - Providing & Fixing of approx. 100mm ht. wooden skirting as per the manufacturers specifications and to the satisfaction of the Banks Engineer. The skirting is fixed using approved adhesive and screw. Rate to include all necessary hardware's, glue etc. complete to the satisfaction of the Banks Engineer. Basic Rate of wooden flooring - Rs. 2153/- Per Smt excluding GST. |
| 21 | 5.1 Partition Frame in Hollow aluminium sections5.1.1 Aluminium Frame - Providing and fixing framing using approx. 50mm x 50mm x 2mm Aluminium box sections placed approx. 600mm c/c both ways fixed on floor and upto slab/beam soffit fixed withanchor fasteners and MS plates. The box sections are connected using approx. 25mm x 25mm aluminium L angle cleat . Rate to include all necessary hardware's, glue, etc. complete to the satisfaction of the Banks Engineer. Mode of measurement - Front Elevational area of framing will be measured & paid for as per actual execution on site . |
| 22 | 5.2 Providing and fixing glass wool insulation of approved make, manufactured from fine glass fibres resin-bonded into semi-rigid batts / boards, conforming to IS 8183, having a density of 24 kg/m³ and a thickness of 50 mm, with thermal conductivity not exceeding 0.041 W/m·K at 25°C mean temperature, supplied with suitable aluminium foil faced / tissue faced facing where specified, laid on a clean, dry and approved surface with joints tightly butted so as to leave no gap, void or compression, mechanically fixed with approved adhesive, GI (galvanised iron) / aluminium pins with washers, GI wire mesh, hook and wire ties, and all necessary accessories for proper fixing and finishing, so that the insulation remains in position without sagging, slipping or settlement, complete with cutting, squaring and fitting around pipes, ducts, brackets, sleeves and penetrations, protection of the exposed face, make-good and cleaning, complete in all respects as required at site and to the entire satisfaction of the Bank's Engineer. Basic Rate of glass wool is Rs. 646/- Per Smt excluding GST. |
| 23 | 5.3 Aluminium Frame for Wooden Paneling5.3.1 Aluminium Frame - Providing and fixing framing using approx. 50mm x 25mm x 2mm Aluminium box sections placed approx. 600mm c/c both ways(pheriphery should be closed with section evn if the last section spacing is lesser than 600 mm c/c ) fixed on exisitng wall below false ceiling. The box sections are connected using approx. 25mm x 25mm aluminium L angle. Rate to include all necessary hardware's, glue, etc. complete to the satisfaction of the Banks Engineer. Mode of measurement - Front Elevational area of framing will be measured & paid for as per actual execution on site.. |
| 24 | 5.4 P/F required skin to existing aluminium frame of Partition5.4.1 Providing and fixing 12mm thick approved make BWP ply skin with 08 mm thk balancing laminate from inside . Basic Rate of 12mm thick plywood is Rs 914/- Per Smt. excluding GST. |
| 25 | 5.4.2 Providing and fixing 18mm thick approved make BWP ply skin with 08 mm thk balancing laminate from inside . Basic Rate of 12mm thick plywood is Rs 1291/- Per Smt. excluding GST. |
| 26 | 5.4.3 Providing and fixing 12.5mm thick approved make Gypsum Board Skin. Basic Rate of 12mm thick Gypsum Board is Rs 269/- Per Smt. excluding GST. |
| 27 | 5.4.4 Providing and fixing 4mm thick approved make teak wood Veneer Skin - Elevation Area will be measured & paid for. Rate to include two or more coats machines finished melamine polish(Glossy or matt ) upto satisfaction of Bank Engineer . Basic Rate of Veneer Rs 1292/- Per Smt. excluding GST. |
| 28 | 5.4.5 Providing and fixing 6mm thick flutted veneer Wooden Skin including providing and applying two or more coat of melamine polish including finishing etc complete as directed by the Bank's Engineer. Elevation Area to be measured and paid for. Basic Rate of flutted Veneer Rs 2284/- Per Smt. excluding GST. |
| 29 | 6.1 POP PUNNING for wall - Providing and applying 4 to 6 mm thick POP Punning using Plaster of Paris of approved make and in line, level, in plumb and at right angles to plastered surfaces in all positions including making 6mm x 6mm grooves at junctions of two dissimilar materials or as shown in drawings, scaffolding, surface preparation if required, cleaning of the area on day to day basis etc. complete as directed. |
| 30 | 6.2 Gypsum Plain Board False Ceiling- :Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks). Basic Rate of 12mm thick Gypsum Board is Rs 269/- Per Smt. excluding GST. |
| 31 | 6.3 Providing and fixing stretch ceiling system made of flexible PVC or polyester membrane stretched over a perimeter track framework, in Conference room. |
| 32 | 6.4 MR Grade Gypsum False Ceiling : Description same as Item No 6.2 but with 12.5mm thick MR Grade Gypsum board. Basic Rate of 12mm thick Gypsum Board is Rs 270/- Per Smt. excluding GST. |
| 33 | 6.5 Access Panels - Providing & Fixing of Access panels of 600 X 600 MM sizes in false ceiling made from aluminium Powder coated frame with section size 50x50x2 supported by strong wires of required strength of 1000 mm c/c from RCC ceiling both ways , and 12.5mm thick MR gypsum board . Rate to include all necessary supports, hardware's etc. complete. |
| 34 | 6.6 Light Fitting Supportings - Providing & Fixing of 12mm thick BWP ply of approved make on top of Gypsum sheet of false ceiling to support Light fittings or at location as directed by the Banks Engineer as required including all necessary hardware's etc. complete. The ply is screwed on frame of false ceiling. |
| 35 | 6.7 POP Moulding - Providing & Fixing of POP moulding of approx. Size : 25mm x 20mm fixed with necessary screws including all necessary hardware's for fixing, Mould, scaffolding etc. complete. |
| 36 | 6.8 Wooden Moulding: Providing and Fixing of 50x50mm TW wooden moulding of approved , colour, shade and of size as per drawing, wooden moulding is fixed as per drawing in pattern using adhesive of approved make and as per the manufacturers recomandation Rate to include all necessary hardware's, glue , (two or more machine finished (glossy/matt )melamine polish etc. complete to the satisfaction of the Banks Engineer. |
| 37 | 7.1 Wooden Door frames - Providing, making and fixing Best Quality well seasoned Teak wood door frames of size & profile (as per drawing) - max. moisture content 12% (IS 287) made out of 2nd class quality Teak wood as approved, kiln seasoned, antitermite treated, shaped, grooved, mitered joint arrangement including use of exterior quality approved water-repellent adhesive, Iron oxidized screws, pins etc. Door frame to be fixed to wall / partition using required diameter, nos. of Anchors of approved make as per the manufacturers recommendations and as per detail drawing and specification & instructions of the Banks Engineer. Door frame to be treated with two coats of wood preservative of approved make. Door frame bottoms of vertical to be provided with 1mm thk alluminium flats before fixing in position as directed. The door frame to be externally finished with two or more coats of melamine polish machine finish (glossy/matt) of approved make including preparing the surface, polishing etc complete. Mode of Measurement : Only exposed/visible volume of Door frame wood will be measured & paid for - Basic rate of wood RS. 6500/- per cft. excluding GST.Supplying, drilling/cleaning hole and fixing appropriate length anchor suitable for fastenings both on concrete & masonry/aerated blocks. Length of anchor should be decided on the basis of embedment depth in base material, total frame thickness & gap between frame and base material. Anchor comprises of 10 mm diameter Polyamide PA 6 grade sleeve and of 7 mm diameter double threaded 6.8 grade countersunk head double threaded screw made of carbon steel galvanized to minimum 5 microns. CF-I 65 insulating and Filling foams (Tested for acoustic and thermal insulation) should be used to fill the gaps between frame & base material with CF-DS1 Dispenser for easy modulation of foam . Fixing methodology to be followed as per manufacturers guidelines. |
| 38 | 7.2 Single Leaf Door: Providing and fixing 45 mm thick solid-core single-leaf flush shutter, factory-made hot-pressed, internally lipped, conforming to IS 2202 (Part I), made with 12 mm BWP ply both sides and exterior-quality synthetic adhesive, of approved make, cladded on both faces with approx. 4 mm thick recon veneer and finished with N.C. lacquer paint of approved make and shade as per manufacturer's specifications on both sides; edges beaded with 06 mm thick teak wood beading at top and bottom and 25 mm thick wood beading at sides, anti-termite treated and fixed with exterior-quality synthetic adhesive, headless nails and non-ferrous countersunk screws; wooden frame fixed with moulding as per design and drawing and finished with N.C. lacquer of approved shade. Rate to include all hardware — hinges, handles, locks, stopper and door closer of approved make as detailed in the schedule — and all incidental works, to the entire satisfaction of the Bank's Engineer. Basic rate for fittings i.e. Hinges, handle, lock, stopper etc. as Rs. 20813/- per single door excluding GST.. Basic rate of recon veneer ₹ 1,292/- per sqm excluding GST.. |
| 39 | 8.1 Interior Emulsion Paint: Wall, ceiling & Partitions - Providing & Applying 2 or more coats painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Note : One coat of paint to be apply after commissioning of AC as directed by Bank Engineer) of approved make, code premium interior water based washable emulsion or approved equivalent of approved make/colour/ shade/ sample as per recommended application procedure. Rate to include preparing the surface, applying necessary coats of putty upto m 2mm thk, one coat of primer as per the manufacturers recommendations, necessary scaffolding complete. (Painted Plain area of ceiling will be measured in Smt including grooves & paid for). |
| 40 | 9.1 Diamond-Shaped Conference Table S (38 PAX) : Technical Specifications:(i) Overall size: Max Length: 16,660 mm (54’8”)Max Center Width: 2439 mm (8’)Straight lenth of table: 4573 mm (15’)End Terminal Width: 1,502 mm (5’)(ii) Table Top: Thickness: 50mm, constructed using approved 25mm BWP-grade blockboard core for structural integrity.Surface Finish: Top face veneered with 4mm thick teak wood veneer , sealed under polyester lamination polish for scratch, stain, and moisture resistance — applied in pattern and design strictly per architectural drawings.Underside: Finished with 0.8mm approved laminate for uniform aesthetics and protection.Edge Detailing: Periphery enhanced with 100mm x 50mm TW moulding, precisely shaped and aligned as per drawing, ensuring a refined, seamless transition.AV Integration: Pre-engineered provisions for POP-UP boxes — including cutouts, reinforcement, and cable routing — sized and positioned to accommodate AV equipment as specified.Edge Finishing: All wooden mouldings and edge profiles finished with high-gloss PU polish (approved manufacturer’s specification), following thorough surface preparation for flawless adhesion and longevity.(iii) Table Base:Structural Frame: Fabricated using aluminum box sections (25mm x 50mm x 2mm), vertically positioned at optimal intervals for load distribution and stability.Internal Reinforcement: Horizontal framing at top and bottom using 19mm thick plywood, with intermediate plywood panels and aluminum cross-bracing (25mm x 50mm sections) as required for rigidity and vibration dampening.External Cladding: Entire framework enveloped in 19mm thick plywood, surfaced with 4mm thick approved teak veneer in specified pattern and shade — matching the table top.Access & Ventilation: Openable louvered shutters (19mm blockboard with 15mm x 65mm wooden louvers) strategically positioned to grant maintenance access to cables, switch boxes, and wire managers — designed per AV ventilation and safety requirements.Shutter Hardware: Side-mounted hanging members (50mm x 35mm) facilitate smooth operation. Interior surfaces of openable zones lined with 19mm plywood and finished with 0.8mm laminate for durability and clean appearance.Surface Finish: All external veneered surfaces, wooden louvers, and shutter frames coated with high-gloss PU polish — applied per manufacturer’s technical specification to ensure UV resistance, color fidelity, and long-term sheen.Integrated Hardware: Includes approved-grade components — concealed antique brass hinges (3-4”) , pull magnets, antique brass ergonomic handles (3-4”), — all pre-installed and aligned as per drawing. Wire management system (approved make) fully integrated within base structure for concealed cable routing and professional-grade AV readiness.The work shall be carried out in good workmanship, materials, and finishes to the satisfaction of the Bank’s engineer. Rate includes all labor, materials, hardware, grooves, mouldings, pharma (if applicable), and ancillary items necessary for complete the work. |
| 41 | 9.2 Over head storage Unit: Providing and fixing overhead storage unit approximately 1830mm long, 450 mm deep and 900 mm high, comprising carcass with verticals, shutters and shelves in approved make18 mm thick BWP grade plywood, backing in approximately 8 mm thick ply, all shutters hinged and fitting true and square with uniform margins and gaps, carcass joints glued, screwed and dowelled with screws countersunk and filled, shelves adjustable on shelf pins with row-boring at approved pitch, and the unit fixed to wall / soffit with MS / SS brackets, anchors and fasteners of approved make, true, level and plumb to line and level; all external surfaces finished with 1mm thick laminate of approved make, shade and all internal surfaces finished with 0.8 mm thick balancing laminate of approve make and shade, applied with approved synthetic resin / contact adhesive, bubbles, warping, lifting and open edges not permitted; rate to include grooves, mouldings, edge lipping / PVC edge banding to cut edges, grooving for back panel, drip and shadow lines, necessary adhesive, and all hardware such as handles, soft-touch / hydraulic self-closing hinges, locks with keys, magnetic catches, shelf pins, wall hooks and brackets, all of approved make, and cutting, fitting and finishing around pipes, sockets, corners and penetrations, protection, make-good and cleaning, complete in all respects as per drawings and details and to the entire satisfaction of the Bank's Engineer — elevational (face) area to be measured and paid per sqm, complete. |
| 42 | 9.3 Open Storage / Display Unit at Waiting Area : Providing and fixing open storage / display unit of approximate size 1500 mm long × 375 mm deep × 750 mm high with sides, top and bottom in approx. 25 mm thick BWP ply of approved make and back in BWP 12 mm thick ply as per design / drawings, all exposed ply edges provided with wooden edge lipping, all exposed areas cladded with 4mm thick teak wood veneer of approved make and shade, and all exposed panelling surfaces finished with 2 or more coat of melamine polish including preparing the base, filling, scraping and sanding between coats etc. complete, rate to include all necessary hardware, adhesive, melamine polish and finishing material complete up to the satisfaction of the Bank's Engineers. |
| 43 | 10.1 BLINDS10.1.1 ROLLER BLINDS - Providing, supplying & installing roller blinds of approved make and shade, comprising polyester / PVC-coated polyester fabric of approved make, colour and openness factor (screen fabric of approved percentage openness, or blackout fabric as directed), anti-bacterial, anti-fungal, fade- and dust-resistant, with heat-sealed hems and finished edges, mounted on a galvanised / pre-coated MS or aluminium roller tube of approved diameter and wall thickness, designed and rated for motorised operation, complete with aluminium head box / valance and side covers of approved make where indicated, bottom bar of approved section with fabric crimped and glued and matching bottom rail, heavy-duty MS / SS end brackets with anti-rotation pins, wall / ceiling / reveal brackets, spacers, wall plugs, screws and all fixing accessories of approved make, fixed true, level and plumb to wall, ceiling or inside the window reveal as per drawing, measured to actual site dimensions, with full-width fabric coverage and no light gap at the sides except as permitted by the Bank's Engineer; make, shade, tube section, bracket type and one fabric sample with technical data sheet to be submitted for prior written approval of the Bank's Engineer, and the approved sample treated as the reference standard for the entire lot; rate to include supply, delivery, hoisting, fabrication to actual site sizes, installation, alignment and adjustment, protection during construction, make-good of all drillings and punctures, cleaning, and all incidental materials, labour and scaffolding, to the entire satisfaction of the Bank's Engineer — measured and paid per sqm of blind area complete in all respects. The rate for this item shall exclude the tubular motor, control gear, cabling, isolator and commissioning of the drive, which shall be measured and paid separately under the separate item for motor and control gear. Basic Rate of Blinds - Rs 4350/- Sqm excluding GST. |
| 44 | 10.1.2 Providing and installing a tubular motor of approved make and capacity (230 V, 50 Hz AC, approved torque and rpm suited to the width and drop of the blind, with thermal cut-out, limit setting, soft start / soft stop, noise level not exceeding 50 dB(A) at 1 m, ISI / CE or equivalent certification), complete with mounting bracket, crown / adaptor wheel and drive adapter, connecting cable up to the nearest indicated point in approved concealed conduit, isolator, wall switch / RF remote / handset as directed, programming, limit setting, group operation of multiple blinds and interface with the automation / BMS system where indicated, including testing, commissioning, O&M manual, as-fitted details, training of Bank's staff and minimum 02 years comprehensive warranty on motor and control gear, to the entire satisfaction of the Bank's Engineer — measured and paid per number of motor fitted, complete in all respects. Basic Rate of tubular motor - Rs 21000/- Sqm excluding GST. |
| 45 | 10.2 Mirror: Providing and fixing 6 mm thk mirror of size, of approved make, with 12 mm thk BWP plywood backing. Mirror with backing plyshall be fixed floated from wall as per design. Edges of ply to be finished with N C Laquer Paint of approved make, shade with necessary coats of putty and primer as per manufacturers specification. Rate to include all necessary hardware's, additional protective film to back of mirror as recommended by Mirror manufacturer complete. Rate to include to make provision to provide cove light to the periphery of mirror as directed by the Banks Engineer. |
| 46 | 10.3 Transition profile - Providing and fixing 1-1/2\\" wide SS (304 Grade) \\"T\\" profile using screw at the joint of carpet & hard flooring including all necessary hardwares etc. complete. |
| 47 | 11.1 Entry11.1.1 Providing, fixing and placing in position a decorative console table of size 1800mm X 450mm X 900mm (6' x 1'6\\" x 3' ) as per approved design / drawing and reference image, comprising of 18 mm thick BWP plywood confirming to IS 710 internal carcass with adequately reinforced joints, top and side panels finished with selected natural teak wood veneer 4 mm thick of approved make & shade finished with 2 or more coats of PU polishd of approved finish and all inside / hidden portion shall be finiehd with 0.8mm thick balancing laminate of approved make and shade including single central drawer with veneered finish front, heavy-duty soft-close hinges and telescopic drawer runners of approved make and model and antique-finish brass finish knobs, handles of approved design. Table to have four White Oak turned legs with decorative profiling (dimensions as per detailed drawing), securely fixed to the internal frame with concealed mechanical SS fasteners and supporting members. All exposed surfaces shall be finished with selected natural teak / walnut shade veneer, matched for grain and colour, properly sanded and finished with approved stain and PU coated in satin / matte finish, etc. complete with anti-termite treatment to plywood, edge lipping, hardware, fabrication, polishing, assembly and installation, all complete as per approved drawings and sample. |
| 48 | 11.2 Comunication Room11.2.1 Providing, fixing and placing in position a custom-made executive office desk of size 1500mm X 750mm X 750mm (5' x 2'6\\" x 2'6\\") with integrated drawer unit and side storage cabinet, as per the approved design / drawings and dimensions, using 18 mm thick BWP grade plywood confirming to IS 710 for the carcass, side panels, drawer fronts, and cabinet shutters, and 25 mm thick plywood for the tabletop. The tabletop shall be finished with premium-quality walnut / natural teak wood veneer of 4 mm thick finished with 2 or more coats of PU polished including matching edge banding / edge rounding / chamfering and bottom shall be finished with approved make and shade balancing laminate as per approved design / drawing.The side storage cabinet shall comprise hinged shutters with decorative wooden moulding / beading details, formed using solid wood or MDF mouldings, neatly mitred and fixed to create raised rectangular panel profiles as per the approved design / images. The drawer fronts shall be provided with matching decorative groove / moulding details to achieve a coordinated finish. All mouldings shall be securely fixed, smoothly finished, and covered with matching walnut wood veneer finished with 2 or more coats of PU polish.The unit shall include built-in drawers with 18 mm thick BWP approved make plywood sides and 6 mm thick plywood bottoms, fitted with heavy-duty soft-close telescopic drawer channels, soft-close hinges, and matching handles of approved make and model. Internal surfaces shall be finished with 0.8 mm thick laminate of approved make and shade, and exposed edges shall be finished with matching PVC edge banding / edge rounding / chamfering.The work shall include all necessary plywood, wooden / MDF mouldings, laminate / veneer, adhesives, screws, hardware, handles, hinges, drawer channels, fittings, labor, transportation, anti-termite treatment to plywood, etc. complete in all respects as per the approved drawings and specifications inclusing cable manager and switch metal boxes of approved make / shade to the satisfaction of the Banks engineer. |
| 49 | 11.2.2 Providing, fixing and placing in position a modular office workstation comprising a 25 mm thick pre-laminated wooden worktop finished with a natural wood finish / approved shade laminate, supported on vertical side panels and intermediate partitions with 18 mm thick plywood finished in matching laminate finish of approved make. The workstation shall include integrated storage cabinets with multiple drawers as per the detailed drawing, surface finished in dark grey laminate, etc. complete with heavy duty soft-close drawer channels, handles, soft-close hinges, of approved make and model, etc. complete with edge banding, reverse chamfering with all necessary hardware, screws, and fittings. The worktop shall be properly aligned, leveled, and securely fixed. The complete unit shall be finished with all necessary accessories and installed as per the approved design, dimensions, and specifications, etc. complete in all respects including, approved make locks, approved make and shade cable manager and switch plug metal boxes, etc. to the satisfaction of the Bank's engineer.Wall facing seating W.S. of approximate size 3800mmX760mmX760mm (12'6\\" x 2'6\\" x 2'6\\"). |
| 50 | 11.2.3 Wall facing seating W.S. as per tender item 11.2.2 above, but with approximate size 2000mm X 600mm X 750mm (6'10\\" x 2' x 2'6\\") |
| 51 | 11.3 Governer Office11.3.1 Providing, fixing and placing fully finished executive wooden table of size 2750mm X 1050mm X 750mm (9' x 3.5' x 2'6\\") comprising large rectangular veneered finished and wooden top made up of with seasoned hardwood (approved make plywood / board) material and of desired thickness as per the approved detailed shop drawing, design, with two side pedestal units with drawers and enclosed storage cabinets, decorative raised / recessed wooden panel mouldings, hardwood edge profiles and matching plinth / base, complete with drawer boxes, heavy- duty soft-close hinges and heavy-duty channels, cabinet shutters, concealed hinges, locks, handles, shelf supports and all necessary hardware of approved make, model, finishes, design, etc complete as per the approved shop drawing and image. External surfaces including tabletop, drawer fronts, pedestal fronts, side panels, mouldings and plinth shall be finished in approved walnut /dark teak stain with wood sealer with minimum 2 or more coats of PU polish finish up to the satisfaction of the Bank. Internal and concealed surfaces including drawer interiors, cabinet interiors, shelf surfaces, underside of top and concealed carcass portions shall be smoothly sanded, sealed and finished with approved clear PU polish finish; all exposed board edges shall be hardwood-lipped / veneered and finished etc. complete with all joinery, carving/moulding, polishing, hardware, as per approved shop drawing, design and sample, complete in all respects. |
| 52 | 11.3.2 Providing, fixing and placing a wooden Centre Table of size 1200mm X 760mm X 450mm (4' x 2'6\\" x 1'6\\") comprising rectangular veneered finished and wooden top made up of with seasoned hardwood (approved make plywood / board) material with rectangular design with veneered top, two decorative front drawers, raised / recessed panel mouldings, carved / fluted lower perimeter moulding and four turned / carved white Oak wood legs, etc. all complete as per approved shop drawing, design and sample image. Item shall include seasoned hardwood / approved make board, complete carcass and drawer construction, internal drawer boxes and bottoms, concealed/soft-close drawer channels, approved knobs/hardware, etc. all complete with necessary joinery, adhesives, screws, dowels, mouldings and carving. All external exposed surfaces including top, drawer fronts, side panels, mouldings and legs shall be stained and finished with approved clear PU polish finish; all internal and concealed surfaces including drawer interiors, underside and concealed carcass portions shall be sealed and finished with clear protective coating. Complete with sanding, staining, polishing, multiple coats of sealer/PU, rubbing down between coats, final finishing, etc. complete in all respects up to the satisfaction of the Bank. |
| 53 | 11.3.3 Providing, fixing and placing finished solid wooden side table /end table of size 600 mm X 750mm X 450mm (2' x 2'6\\" x 1'6\\") , as per approved design and sample, comprising a rectangular top with moulded/rounded edge profile, one front storage drawer with wooden front and black/antique-finish knob, four turned/decorative solid-wood legs, and a lower wooden shelf. Table to be fabricated in white Oak with all joints properly glued, screwed/dowelled and mechanically secured. Exposed surfaces to be smoothly sanded and finished with approved wood stain and PU coated finish, including matching finish to top, drawer, legs, shelf and all exposed edges. Drawer to be provided with suitable concealed/soft-close heavy-duty channel runners. Bottom shelf to be securely fixed between legs, etc. complete with all necessary hardware, fittings, levelling/protective pads, polishing, finishing as per approved shop drawing and sample image. |
| 54 | 11.3.4 Providing, fixing and placing a solid wooden side table / end table of size 650mm X 450mm X 450mm (2'2\\"x1'6\\"x1'6\\") as per approved design and sample, comprising a rectangular top with moulded/rounded edge profile, one front storage drawer with wooden front and black/antique-finish knob, four turned/decorative solid-wood legs, and a lower wooden shelf. Table to be fabricated in white Oak with all joints properly glued, screwed/dowelled and mechanically secured. Exposed surfaces to be smoothly sanded and finished with approved wood stain and PU/melamine clear finish, including matching finish to top, drawer, legs, shelf and all exposed edges. Drawer to be provided with suitable concealed/soft-close or heavy-duty channel runners. Bottom shelf to be securely fixed between legs. Complete with all necessary hardware, fittings, levelling/protective pads, polishing, finishing, as per approved drawing and sample. |
| 55 | 11.3.5 Providing, fixing and placing a custom-made bathroom vanity cabinet of size 1200mmX600mmX800mm (4' x 2' x 2'8\\") as per the approved design and dimensions, comprising a seasoned hardwood internal frame / 18 mm thick approved make BWP plywood carcass, 18 mm thick plywood shutters, confirming to IS 710 and drawer fronts, multiple drawers with soft-close channels, cabinet shutters with soft-close heavy -duty hinges, and dark walnut / teak wood veneer finish as per the approved detailed shop drawing. The unit shall include internal partitions, shelves, drawer boxes, brass-finish handles, edge banding, and all necessary hardware, of approved make and model, screws, adhesives, and accessories. The vanity shall be finished with a white italian marble / Granite stone countertop of 18 mm avg. thick , including wash hand basins cutout, polished / moulded edges, silicone sealing, and all necessary fittings, etc. complete in all respects as per the approved shop drawing and as per the direction of the Bank's engineer. |
| 56 | 11.4 EA / Manager Room11.4.1 Providing, fixing and placing a custom-made executive wooden office desk of size 1500mmX 900mmX 750mm (5' x 3' x 2'6\\") as per the approved shop drawing, design and dimensions, comprising a rectangular tabletop made of 25 mm thick approved make BWP grade plywood confirming to IS 710, finished with premium-quality 4mm thick dark walnut woodgrain / natural teak wood veneer, polished with 2 or more coats of PU, including decorative edge moulding and a profiled apron with layered wooden beading details, etc. complete as per the detailed shop drawing and sample image.The desk shall be supported on two panelled pedestal legs fabricated using 18 mm thick approved make BWP grade plywood, finished with matching walnut / teak wood veneer polished with 2 or more coats of PU, and provided with decorative raised rectangular panel mouldings made of solid wood / MDF of desired thickness as per detailed shop drawing, neatly mitred and fixed to the front and side faces. The pedestal bases shall be provided with matching decorative skirting and moulding details.All exposed surfaces shall be finished with matching walnut woodgrain / teak wood veneer polished with PU coating with internal surfaces finished in 0.8 mm thick laminate. The work shall include all necessary plywood, wooden / MDF mouldings, edge banding, adhesives, screws, fasteners, hardware, fabrication, assembly, complete in all respects as per the approved drawings and specifications, to the satisfaction of the Bank engineer. |
| 57 | 11.5 DG Office (2 Nos.)11.5.1 Providing, fixing and placing a custom-made executive office desk / table of size 2400mm X 1050mm X 750 mm (8' x 3.5' x 2'6\\") as per the approved shop drawing, design and dimensions, comprising a rectangular tabletop made of 25 mm thick BWP grade approved make plywood confirming to IS 710, finished with premium-quality dark walnut woodgrain / natural teak wood veneer of 4 mm thickness, including decorative edge moulding and profiled apron detailing.The desk shall be supported on two side pedestal cabinets fabricated using 18 mm thick BWP grade approved make plywood, finished with matching walnut / teak wood veneer of 4 mm thick, and provided with decorative raised rectangular panel mouldings on the front and side faces, including stepped base skirting and ornamental corner detailing.The desk shall include three front drawers, comprising one central wide drawer and two side drawers, fabricated using 18 mm thick approved make plywood with 6 mm thick drawer bottoms, fitted with heavy-duty soft-close telescopic channels and antique brass / matching finish handles of approved make and shade. The pedestal cabinets shall include hinged shutters with decorative moulding panels, fitted with soft-close hinges and matching hardware.All exposed surfaces shall be finished with matching walnut woodgrain laminate / veneer or approved PU coated melamine polish, with internal surfaces finished in 0.8 mm thick laminate. The work shall include all necessary plywood, wooden / MDF mouldings, decorative beading, edge banding, adhesives, screws, handles, hinges, drawer channels, fasteners, fabrication, assembly, complete in all respects including cable manager and electrical switch/plug boxes etc as per the approved drawings and specifications, to the satisfaction of the Bank's engineer and shop drawings as per the sample image. |
| 58 | 11.5.2 Providing, fixing and placing in a place a custom-made floor-to-ceiling display cabinet of size 2640mm X 450mm X 685mm (8 8\\"x 1'6\\" x 2'3\\") as per the approved make shop drawing, design and dimensions, comprising a carcass made of 18 mm thick BWP Grade approved make plywood confirming to IS 710 , finished with 4mm thick walnut woodgrain / natural teak wood veneer of approved make on all exposed surfaces and including exposed back surface and all inernal surfaces with matching /finished with 0.8 mm thick approved shade and make laminate. The unit shall comprise a central open display niche with decorative back panel, integrated warm LED lighting, and a framed display opening with decorative moulding and beading as shown in details. The side sections shall include full-height cabinets with glazed shutters, 12 mm thick glass shelves, and concealed hinges, as per the approved shop drawing, make and design.The lower section shall comprise multiple drawers and hinged cabinet shutters with decorative raised rectangular panel mouldings, matching wooden beading, and stepped skirting details. Drawers shall be fabricated using 18 mm thick BWP approved make plywood with 6 mm thick bottoms and fitted with heavy-duty soft-close telescopic channels, hinges of approved make and models. Cabinet shutters shall be fitted with soft-close hinges and antique brass / matching finish handles.All exposed edges shall be finished with matching edge banding, and all mouldings shall be neatly mitred and finished to match the walnut finish. The work shall include all necessary plywood, glass, wooden / MDF mouldings, decorative beading, LED lighting, electrical accessories, hinges, drawer channels, handles, screws,knobs ,adhesives, fabrication, assembly, complete in all respects as per the approved drawings and specifications, to the satisfaction of the Bank's engineer and shop drawings as per the sample image. |
| 59 | 11.5.3 Providing, fixing and placing a custom-made wooden console Centre Table of size 1200mm X 750mm X 450 mm (4' x 2'6\\" x 1'6\\") as per the approved design and dimensions, comprising a rectangular tabletop made of 25 mm thick BWR-grade plywood, finished with premium-quality dark walnut wood veneer / laminate and polished edges.The console shall include a front apron with two drawers featuring decorative raised rectangular panel mouldings, matching wooden beading, and antique brass / matching finish knobs. The drawer boxes shall be fabricated using 18 mm thick plywood with 6 mm thick bottoms and fitted with smooth-running telescopic drawer channels.The table shall be supported on four decorative turned wooden legs made of seasoned solid hardwood, featuring ornamental curved profiles and matching walnut wood polish. The apron shall incorporate decorative moulding and beading details along the front and side edges, with all joints neatly finished.All exposed surfaces shall be finished with matching walnut wood veneer and approved PU polish. The work shall include all necessary plywood, solid wood, mouldings, beading, drawer channels, knobs, adhesives, screws, fabrication, assembly, complete in all respects as per the approved drawings and specifications, to the satisfaction of the Banks engineer and shop drawings as per the sample image. |
| 60 | 11.6 Chairs- Atleast three makes and model number should be indicated or basic prices for these items may be indicated.11.6.1 Providing, and placing high-back executive revolving office chair, ergonomically designed, with upholstered seat and back in approved quality commercial-grade fabric over high-density foam, fixed padded armrests with metal supports, pneumatic gas-lift height adjustment, tilt/swivel mechanism with tension control, 360° rotation, five-star polished metal/chrome-finished base and five twin-wheel castors, complete with all accessories, fittings, assembly and installation, as per approved sample and manufacturer's specifications.Manager Chair - For Comunication room, Manager Room |
| 61 | 11.6.2 Providing, and placing executive revolving office chair with a Medium-back revolving, upholstered in premium-quality brown leather / leatherette, featuring a cushioned seat and backrest with ergonomic support and horizontal padded detailing. The chair shall be provided with a sturdy metal internal frame, padded armrests with metal supports, and a height-adjustable gas-lift mechanism. The chair shall be mounted on a heavy-duty five-star metal base with smooth-rolling twin-wheel nylon / PU castors, 360-degree swivel functionality, and a tilt and reclining mechanism with locking provision. All upholstery, cushioning, fittings, and mechanical components shall be of approved quality, complete with assembly and installation as per the approved design and specifications.Visitor Chair - Governer Office, DG Office (2) |
| 62 | 11.6.3 Providing, and placing Medium-back revolving office chair, ergonomically designed, with upholstered seat and back in approved quality commercial-grade fabric over high-density foam, fixed padded armrests with metal supports, pneumatic gas-lift height adjustment, tilt/swivel mechanism with tension control, 360° rotation, five-star polished metal/chrome-finished base and five twin-wheel castors, complete with all accessories, fittings, assembly and installation, as per approved sample and manufacturer's specifications.Workstation/Visitor Chair - For Comunication room, Manager room |
| 63 | 11.6.4 Providing, and placing executive revolving office chair with a Medium-back revolving, upholstered in premium-quality brown leather / leatherette, featuring a cushioned seat and backrest with ergonomic support and horizontal padded detailing. The chair shall be provided with a sturdy metal internal frame, padded armrests with metal supports, and a height-adjustable gas-lift mechanism. The chair shall be mounted on a heavy-duty five-star metal base with smooth-rolling twin-wheel nylon / PU castors, 360-degree swivel functionality, and a tilt and reclining mechanism with locking provision. All upholstery, cushioning, fittings, and mechanical components shall be of approved quality, complete with assembly and installation as per the approved design and specifications. Conference Room Chairs |
| 64 | 11.6.5 Providing and supplying a luxury executive revolving office chair with a high-back ergonomic design, upholstered in premium-quality brown leather / leatherette, featuring a cushioned headrest, padded seat, and backrest with diamond-pattern buttonless quilted stitching and integrated lumbar support. The chair shall be provided with a sturdy internal metal frame, high-density PU foam cushioning, and wide padded armrests with decorative walnut-finish wooden side panels and polished trim detailing.The chair shall be equipped with a heavy-duty gas-lift mechanism for height adjustment, 360-degree swivel functionality, and a tilt and reclining mechanism with locking provision. The chair shall be mounted on a five-star metal base with a polished chrome / metallic finish and smooth-rolling twin-wheel castors. All upholstery, cushioning, armrest detailing, mechanical components, and fittings shall be of approved quality, complete with assembly and installation as per the approved design and specifications.Governer Chair, DG Chair (2) |
| 65 | 11.7 Sofa-Atleast three makes and model number should be indicated or basic prices for these items may be indicated.11.7.1 Providing and placing three-seater sofa with an internal structure frame made of 18 mm thick BWR-grade plywood, reinforced with plywood ribs and hardwood support members. The sofa shall feature a sturdy plywood seat base with suitable webbing / spring support, high-density PU foam cushioning, and a padded backrest with button-tufted detailing, upholstered in premium-quality brown leather / leatherette. The sofa shall include padded armrests, three individual seat cushions, and solid hardwood legs with a polished metallic / gold finish, complete with all necessary materials, hardware, fabrication, upholstery, and finishing as per the approved design and specifications.Executive Lounge - Sofa of size 5.5' L |
| 66 | 11.7.2 Providing and placing a luxury three-seater Chesterfield sofa with an internal structure frame made of 18 mm thick BWR-grade plywood, reinforced with plywood ribs and hardwood support members. The sofa shall feature a deep-button-tufted backrest, rolled armrests with decorative nailhead studs, and cushioned seating with high-density PU foam, upholstered in premium-quality brown leather / leatherette. The sofa shall be provided with a sturdy plywood seat base, suitable webbing / spring support, and solid hardwood legs with a dark walnut finish, complete with all necessary materials, hardware, fabrication, upholstery, and finishing as per the approved design.Governer Office - Sofa of size 5'5\\"L |
| 67 | 11.7.3 Providing and placing a luxury single-seater Chesterfield armchair with an internal frame of 18 mm thick BWR-grade plywood, reinforced with plywood ribs and hardwood supports, upholstered with high-density PU foam and premium brown leather / leatherette, featuring a deep-button-tufted backrest, padded armrests with decorative nailhead studs, cushioned seat, and solid hardwood legs with dark walnut / black polish, complete with all necessary materials, hardware, fabrication, and finishing as per the approved designa luxury single-seater Chesterfield armchair with an internal frame of 18 mm thick BWR-grade plywood, reinforced with plywood ribs and hardwood supports, upholstered with high-density PU foam and premium brown leather / leatherette, featuring a deep-button-tufted backrest, padded armrests with decorative nailhead studs, cushioned seat, and solid hardwood legs with dark walnut / black polish, complete with all necessary materials, hardware, fabrication, and finishing as per the approved designGoverner Office - Sofa of size 3' L |
| 68 | 11.7.4 Providing and placing a modern three-seater sofa with an internal structure frame made of 18 mm thick BWR-grade plywood, reinforced with plywood ribs and hardwood support members. The sofa shall comprise a sturdy plywood seat base with suitable webbing / spring support, high-density PU foam cushioning, three individual seat cushions, and three padded back cushions, upholstered in premium-quality brown leather / leatherette. The sofa shall include padded armrests, a fully upholstered back, and solid wooden legs with a dark finish, complete with all necessary materials, hardware, fabrication, upholstery, and finishing as per the approved design and specifications.DG Office (2) - Sofa of size 7'5\\" L |
| 69 | 11.7.5 Providing and placing a modern single-seater armchair with an internal structure frame made of 18 mm thick BWR-grade plywood, reinforced with plywood ribs and hardwood support members. The chair shall comprise a sturdy plywood seat base with suitable webbing / spring support, high-density PU foam cushioning, a padded backrest with a matching loose cushion, and fully upholstered padded armrests, finished in premium-quality brown leather / leatherette. The chair shall be provided with solid wooden legs with a dark finish, complete with all necessary materials, hardware, fabrication, upholstery, and finishing as per the approved design and specificationsDG Office (2)- Sofa of size 3' L |
| 70 | 2 Plumbing Work - SECTION 1: Sanitary Installations1.1 Providing and fixing white vitreous china wall hung type water closet (European type W.C. pan) with polypropylene soft close/hydraulic seat cover and lid with necessary CP/brass hinges and rubber buffer, including chair bracket with SS bolts/nuts, Dual type flushing cistern with flush plate with complete support framing, 32mm dia (ID) PVC flush pipe connecting concealed flush tank to WC, 110mm OD WC connector to connect to soil pipe, with all fittings and fixtures complete, including cutting/chasing the wall by chase cutter and making good the walls and floors with CM 1:4 wherever required and as directed (Basic rate of WC - Rs. 11949/-, Basic rate of flushing cistern - Rs. 5403/-, Dual-flush faceplate- Rs. 4915/- ) |
| 71 | 1.2 Providing and fixing under counter white Vitreous China wash basin of specified size and model, 32mm CP brass waste coupling, C.P brass bottle trap 32 mm size, extension pipes, wall flanges and concealed G.I clamps complete including MS brackets, 15mm NB uPVC 45cm length flexible pipe with brass unions. making necessary holes and other cutting in the counter top and fixing the wash basin rigidily including making good the walls wherever required all complete as per the architectural drawings and as directed. ((Including sealing the joint between wash basin and platform with white cement/clear sealant of approved make to make the joint leak proof) ) all complete as per the architectural drawings and as directed by banks engineer. (Basic rate of wash basin - Rs. 7797/-, Bottle trap - Rs. 1907/-) |
| 72 | 1.3 Providing & fixing battery operated liquid soap dispenser including necessary accessories. (Basic rate - Rs 3390/-) |
| 73 | 1.4 Providing and fixing 2 way bib tap with Health Faucet with metal hose in position with C.P. brass screws and necessary accessories etc. complete. (Basic rate of 2 way bib cock - Rs. 2458/-, health haucet with metal hose pipe - Rs.1695/-) |
| 74 | 1.5 Providing and fixing in position SS 304 toilet paper holder with all accessories as instructed to the wall C.P. brass screws on wooden or fiber plugs etc. complete. (Basic rate - Rs. 2076/-) |
| 75 | 1.6 Providing and fixing battery based infrared sensor operated Urinal as approved by Bank engineer with inbuilt sensor and C.P. dome shaped grating C.P. waste coupling, CP spreader, CP bottle trap, etc. complete (Basic rate - Rs.18305/-, Bottle trap - Rs. 1907/-) |
| 76 | 1.7 Supplying, Installing, testing and commissioning C.P brass battery operated based infraredsensor operated pillar cock having foam flow technology. (Basic rate - Rs.15254/-) |
| 77 | 1.8 Providing and fixing 15mm C.P. brass Angular Stop Cock With Wall Flange for wash basins, water purifier including cutting and making good the walls wherever required all complete as directed (Basic rate - Rs.1504-) |
| 78 | 1.9 Providing and fixing satin finish single Bowl Stainless Steel sink without drain board with Overall size 535 mm x 460 mm (21 inch x 18 inch) and bowl size 470 x 395 x 215 mm (18½ x 15½ x 8½ inch) with necessary C.I. brackets, waste coupling, including connecting 40 mm dia O.D. PVC pipe to waste coupling and upto trap and stainless steel plug 40 mm, making necessary holes and other cutting in the counter top and fixing the sink rigidily including making good the walls wherever required all complete Including sealing the joint between sink and platform with white cement/clear sealant of approved make to make the joint leak proof. Basic rate of sink- Rs. 5279/- |
| 79 | 1.1 Providing and fixing wall-mounted paper dispenser of approved make and model, in SS 304 grade stainless steel / high-impact ABS body with brushed finish and free-swing / controlled-drop dispensing mechanism with anti-theft locking shutter and key, complete with mounting plate, SS screws, wall plugs, brackets and all fixing accessories of approved make, fixed to wall as directed, in true, level and plumb, complete to the entire satisfaction of the Bank's Engineer. (Basic rate - Rs. 5890/-) |
| 80 | 1.11 Providing and fixing on floor automatic shoe shining machine for brown and black shoes of stainless steel body in gents and ladies toilet of 90W of height including all required accessories etc.complete. (Basic rate - Rs. 7175/-) |
| 81 | SECTION -02 WATER SUPPLY2.1 Providing and fixing in position CPVC pipes SDR-11 Class-1 conforming to IS 15778 for cold water,for sizes mentioned below with all fittings, solvent welding as per manufacturers recommendation, including chasing concealing reinstating the wall surface, fixing the pipes to walls with heavy duty G.I. clamps etc. complete including all testing as specified or directed. (For cold and hot water pipes concealed in wall )2.1.1- 15 mm nominal bore |
| 82 | 2.1.2 20 mm nominal bore |
| 83 | 2.2 Providing and fixing in position CPVC pipes SDR-11 Class-1 conforming to IS 15778 for cold water,for sizes mentioned below with all fittings, solvent joint as per manufacturers recommendation, including hanging the pipes below ceiling with hangers/supports at every approx. 1.5 m interval and at bends with G.I hanger rod 6mm dia fully threaded etc. complete including all testing as specified or directed. (For cold and hot water pipes inside false ceilng )2.2.1 - 15 mm nominal bore |
| 84 | 2.3 providing and fixing forged brass ball valve with lever and female threaded ends of pressure rature PN 16 including all necessary accessories 2.3.1- 20 mm nominal bore |
| 85 | SECTION -03 DRAINAGE3.1 Providing, fixing, testing & commisioning in position pvc pipes including all fittings such as tees,wyes, bends, with or without door, long radius bends etc. including jointing with Bank's approved polymerbased compound all as per manufacturers recommandations or as directed by Bank's Enginner, including supporting the pipes on walls or below ceiling with heavy duty support systems at every 1.5 mts interval and at bends, including laying the pipes in slope inside sunken floor, including testing the pipes and joints for water tightness etc complete for sizes.(For pipes within toilet)3.1.1- 75 mm dia. Nominal bore |
| 86 | 3.1.2 100 mm dia. Nominal bore |
| 87 | 3.2 Providing and fixing rigid PVC (10 kg/sq.cm) waste pipes for wash basins & sink drains including all fitting, making chases in wall/floor and reinstating the surface etc complete.3.2.1- 40 mm nominal outer dia |
| 88 | 3.2.2 50 mm nominal outer dia |
| 89 | 3.3 Making connection to existing pvc drainage downtake (soil and waste downtake) including removing of existing pipe connections from toilet and pantry, jointing new pipes, testing the joints, cutting/heating of existing pipes if required, co-ordinating shut down with client,including all required machineries and accessories etc complete. (Rate shall incluide all testing changes) |
| 90 | 3.1 HVAC WORKDucting Dismantling, Reworking, Realignment, Installation & CommissioningDismantling of existing ductwork installed at site wherever required.Reworking, modification, and realignment of dismantled ducts as per approved drawings, specifications, and actual site conditions.Providing and properly fixing required insulation to all ducts, including sealing and finishing of insulation joints.Rechecking and rectification of all duct joints, connections, supports, hangers, and installation details.Commissioning of factory-fabricated GSS sheet metal rectangular/round ducting, complete with neoprene rubber gaskets, elbows, splitter dampers, turning vanes, hangers, supports, and all necessary accessories, as per approved drawings and specifications.Checking the complete ducting system for proper installation, alignment, air-tightness, and functionality.Carrying out all necessary adjustments, corrections, and finishing works to ensure the ducting system is complete and ready for commissioning and operation. |
| 91 | 3.2 GSS Sheet Metal Ducting with 25 mm Aluminium Foil Insulation Supply, installation, balancing, testing and commissioning of factory-fabricated GSS sheet metal rectangular/round ducting, complete with 25 mm thick Aluminium Foil-faced insulation, neoprene rubber gaskets, elbows, splitter dampers, turning vanes, hangers, supports, and all necessary accessories, as per approved drawings, specifications, and site requirements.The scope shall include all required duct fittings, joints, flanges, sealing, supports, hangers, insulation fixing, vapour sealing, and finishing, complete in all respects and ready for commissioning.Ducting shall be fabricated using the following GSS sheet thicknesses:1. 0.63 mm thick GSS sheet – Supply, installation, balancing, testing and commissioning of complete rectangular/round ducting system with 25 mm Aluminium Foil-faced insulation, including all fittings, accessories, supports, and finishing as specified above. |
| 92 | 3.2 2. 0.80 mm thick GSS sheet – Supply, installation, balancing, testing and commissioning of complete rectangular/round ducting system with 25 mm Aluminium Foil-faced insulation, including all fittings, accessories, supports, and finishing as specified above. |
| 93 | 3.3 Supply & Installation of GSS Ducting 24G Collar Branches with 25 mm Aluminium Foil InsulationSupply, fabrication and installation of 24 Gauge GSS sheet collar branches/take-offs at main duct branches wherever required, as per approved drawings and actual site conditions.Branch collars shall be properly connected to the main duct with suitable flanges, cleats, screws, sealants and accessories, ensuring rigid, properly aligned and airtight connections.Provide 25 mm thick Aluminium Foil-faced insulation over the collar branches, including proper fixing, joint sealing, overlapping and finishing, continuous with the adjacent duct insulation.Scope shall include all necessary cutting, fittings, fasteners, supports, sealants, insulation accessories and finishing required for complete installation.Complete work shall be checked for proper alignment, airtightness, insulation continuity and workmanship, and shall be executed as per approved drawings, specifications and instructions of the Engineer/Consultant. |
| 94 | 3.4 Supply & Installation of Linear Grilles & Diffusers & Volume control Dampers For Air ControlSupply and installation of linear grilles, slot diffusers, and ceiling/wall diffusers of approved make, type, size and finish, as per approved drawings and specifications.Grilles and diffusers shall be properly connected to the ductwork/plenum using suitable collars, flexible connections, fasteners and required accessories, ensuring proper alignment and airtight installation.Provide all necessary supports, frames, fixing arrangements, dampers and accessories required for complete and secure installation.Installation shall be carried out in proper level and alignment with the ceiling/wall finish, ensuring uniform appearance and unobstructed airflow.Complete installation shall be checked and adjusted for proper air distribution, alignment and appearance, including balancing as required, and shall be completed as per approved drawings and instructions of the Engineer/Consultant. |
| 95 | 3.5 Servicing & Commissioning of AHUs – Labour Work OnlyComplete servicing and inspection of existing AHUs, including cleaning of filters, coils, drain trays, blower/fan assemblies, internal surfaces and other accessible components.Checking and servicing of blower, motor, belts, bearings, dampers, drain lines and associated components, including tightening of electrical/mechanical connections wherever required.Checking and rectification of airflow, vibration, abnormal noise, water drainage and general operating condition of the AHU.Commissioning and trial operation of AHUs after servicing, including checking of supply/return air temperature, airflow and proper functioning of the unit.The scope is labour work only. All replacement parts, consumables, refrigerant, filters, belts, bearings, electrical components and other materials, if required, shall be supplied separately by the client. |
| 96 | 4 SECTION -01 LIGHTING POWER DB'S4.1 DISTRIBUTION BOARDSupply installation, testing and commissioning of company manufactured Surface/ recess mounting, vertical/ horizontal, inter connection leads with spares distribution board made up of sheet metal, dust proof, powder quoted provided with inbuilt suitable size copper- neutral & earth link din bar for mounting MCBs complete in all respect. Rate shall be inclusive of all required hardware materials labour involve complete in all respect. A- Raw Power Main DB(i) 6 way (4 + 18), Vertical Double door |
| 97 | ii) incomer100A, 4P MCCB 25KA |
| 98 | iii) Outgoings16/20/25/32A Triple Pole MCB's |
| 99 | iv) 63/40A Triple Pole MCB's |
| 100 | B UPS Supply - DB(i) 08 way (4 + 24), Vertical Double door (Per Phase Isolation) |
| 101 | ii) incomer 63A, TPN MCB |
| 102 | iii) Sub-incomer63A, DP RCCB, 100mA |
| 103 | iv) Outgoings6A/10/16/20/25A Single Pole MCB's |
| 104 | C Raw Power Supply - PDB-1(i) 6 way (4 + 18), Vertical Double door (Per Phase Isolation) |
| 105 | ii) incomer32A, TPN MCB |
| 106 | iii) Sub-incomer32A, DP RCCB, 100mA |
| 107 | iv) Outgoings6A/10/16/20/25/32A Single Pole MCB's |
| 108 | D Lighting Power Supply - LDB-1(i) 6 way (4 + 18), Vertical Double door (Per Phase Isolation) |
| 109 | ii) incomer25A, 10KA ,TPN MCB |
| 110 | iii) Sub-incomer25A, DP RCCB, 100mA |
| 111 | iv) Outgoings6A/10/16/20/25A Single Pole MCB's |
| 112 | E Lighting Power Supply - ELDB-1(i) 16 way , Double door, SPN |
| 113 | ii) incomer25A Double Pole MCB's |
| 114 | iii) Sub-incomer25A, DP RCCB, 100mA |
| 115 | iv) Outgoings6A/10/16/20/25A Single Pole MCB's |
| 116 | 4.2.1 SECTION -02 CABLESSupply, Laying, Testing & commissioning of aluminium / copper armoured/ unarmoured FRLS XLPE Insulated 1.1KV ISI marked Power / control cables fixed/provided on walls, ceilings etc. as per site condition and as directed by bank's engineer/architect with required necessary hardware material etc. in all respect.4.2.1.1- 4 Core 25 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 117 | 4.2.1.2 4 Core 10 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 118 | 4.2.1.3 4 Core 6 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 119 | 4.2.1.4 4 Core 4 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 120 | 4.2.1.5 3 Core 4 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 121 | 4.2.2 Supply, Installation, Testing and Commissioning of end termination with suitable size of brass single compression gland and Copper lugs for following size of PVC insulated, PVC sheathed XLPE aluminium/copper conductor cable of 1.1 kV grade as per site condition.4.2.2.1 - 4 Core 25 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 122 | 4.2.2.2 4 Core 10 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 123 | 4.2.2.3 4 Core 6 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 124 | 4.2.2.4 4 Core 4 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 125 | 4.2.2.5 3 Core 4 sq. mm Copper unarmoured XLPE insulated cable- 2XFY |
| 126 | SECTION -03 POINT WIRING, POWER OULETS & CIRCUITS 4.3.1 Wiring for Primary Light PointPrimary Light Point - Supply, Laying, installation, testing & Commissioning of primary light point using three runs of 1.5 sq mm, 1100 volt, ISI marked, fire resistant low smoke (FRLS)PVC insulated multi stranded copper conductor wire (Neutral, and earth in looping system) to respective point outlet (partly in concelaled manner / surface/ on wall) provided in suitable size of medium mechanical stress (MMS) conduit with all required accessories like coupler, bend, long bend, tee, junction box, required hardware materials etc. as per site requirement, terminated in 6 Amp modular plate type switch of approved make mounted on suitable size heavy duty PVC plate with concealed PVC / Metal back box(switch board of same make) with interconnection and also complete with outlet point either with angle/ straight holder / ceiling rose / connector etc. as directed for light point. Rate shall be inclusive of cost of circuit wiring using three runs of 2.5 sq mm 1100 volts, ISI marked stranded copper conductor PVC insulated fire resistant low smoke FRLS (Wire from MCB DB to respective switchboard as per drawing) all required hardware materials labour involve, civil work required for concealing the pipes etc as per site requirement, complete in all respect. |
| 127 | 4.3.2 Wiring For Secondary Light PointSupply, Laying, installation, testing & Commissioning - Wiring for Secondary Light Points using three runs of 1.5 sq mm, 1100 volt, ISI marked. fire resistant low smoke (FRLS)PVC insulated multi stranded copper conductor wire (Neutral, and earth in looping system) to respective point outlet (partly in concelaled manner / surface/ on wall) provided in suitable size of medium mechanical stress (MMS) conduit with all required accessories like coupler, bend, long bend, tee, junction box, required hardware materials etc. as per site requirement, terminated in 6 Amp modular plate type switch of approved make mounted on suitable size heavy duty PVC plate with concealed PVC / Metal back box(switch board of same make) with interconnection and also complete with outlet point either with angle/ straight holder / ceiling rose / connector etc. as directed for light point. Rate shall be inclusive of cost of all required hardware materials labour involve, civil work required for concealing the pipes etc as per site requirement, complete in all respect. |
| 128 | 4.3.3 Wiring for half Point on Control switch board Same as item no. 4.3.1 above, but for supply, fixing, testing and commissioning half point wiring for 6 Amp. universal socket ( 2 pin + 3 pin) and switch modular type to be fixed on control switch board used for light control complete in all respect. |
| 129 | 4.3.4 Wiring for 6 Amp plug point - IndependentWiring for independent 6 Amps plug point with 3 x 2.5 sq mm multi stranded copper conductor FRLS wire for phase, neutral and earth PVC insulated 1100 volts grade in rigid PVC conduit of approved size along with accessories to be laid in concealed manner as specified in item no.3.1 above, along with 6 Amp modular switch, and shutter type socket (2 pin+ 3 pin) mounted independently on suitable size heavy duty PVC / Metal Box for concealed with PVC board provided on surface/ concealed type of approved make. (Wire from MCB DB to respective switchboard OR Switch board to switch board as per drawing.) The works are to be carried out as per site equirement and as instructed by Bank’s Engineer/ Architect. Rate shall be inclusive of all required hardware materials labour involve complete in all respect. |
| 130 | 4.3.5 Wiring for 16 Amp Plug point – IndependentSame as 4.3.1 & 4.3.4 above but for 16 Amps plug points independent using 2 x 4 + 1 X 2.5 sq mm multi stranded copper conductor FRLS wire. Rate shall be inclusive with cost of 16A switch socket. |
| 131 | 4.3.6 Wiring for 2x16 Amp Plug point – IndependentSame as 4.3.1 & 4.3.4 above but for 2no. of 16 Amps plug points independent using 2 x 4 + 1 X 2.5 sq mm multi stranded copper conductor FRLS wire. Rate shall be inclusive with cost of 2 no. 16A switch socket. |
| 132 | 4.3.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed HMS class PVC conduit as required, cost of conduit will be part of this scope 4.3.7.1 - 2X1.5 SQMM + 1X1.5 SQMM EARTH WIRE |
| 133 | 4.3.8 Telephone WiringWiring using the 2 core telephone wire ISI marked, in suitable size PVC conduit, as detailed in 4.3.1 from available telephone junction MDF box. Rate shall include supply, laying, terminating etc. of telephone cable alongwith telephone jack & cable, complete in all respect.Note : If space permits, proposed telephone wires may be laid through Lan wiring pipes. |
| 134 | 4.3.9 TRUNKING & CABLE TRAYS Supply and laying raceways/conduits on floor/wall. The raceways/conduits shall be fixed to the floor/Wall with clamps for finished levels as per site conditions or through partitions with all accessories, bends, pull wire etc. but excluding the mounted junction boxes, bends, pull wire etc. but excluding the floor mounted junction boxes which shall be paid separately. The metal/PVC conduits/raceways shall be earth at suitable intervals the distance between data conduits and power conduits shall be maintained at least 6\\" apart., floor cutting to be included in this item4.3.9.1- 100mm x 38mm, 1.6mm thk GI raceway |
| 135 | 4.3.9.2 50mm x 38mm, 1.6mm thk GI raceway |
| 136 | 4.3.9.3 100mm x 50mm, 1.6mm thk GI Powder coated trunking for DB dressing |
| 137 | 4.3.10 Supply and Installation of following sizes HMS FRLS PVC conduit embedded or surface mounted, including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab, cutting chasis and making good wherever called for or surface mounted including all fixing hardware as per specification.4.3.10.1- 25 mm dia. ISI marked, HMS PVC conduit |
| 138 | 4.3.10.2 32 mm dia. ISI marked, HMS PVC conduit |
| 139 | 4.3.10.3 50 mm dia. ISI marked, HMS PVC conduit |
| 140 | 4.11 Supply and installing of 2mm thicK GI floor/Ceiling junction boxes for the raceway/conduites mentioned above of following sizes with cover with four nos. SS screws with proper cutouts on the sides for conduit entry and screwed top cover with rubber gasket and suitable knockouts ,as required complete in all respects.4.11.1- 100mmx100mmx30/35mm deep 2mm thk' |
| 141 | 4.11.2 150mmx150mmx30/35mm deep 2mm thk' |
| 142 | 4.11.3 250mmx250mmx30/35mm deep 2mm thk' |
| 143 | 4.11.4 350mmx250mmx30/35mm deep 2mm thk' |
| 144 | 4.12 CABLE TRAYS Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required accessories complete in all respect 4.12.1 - 50 mm width X 50 mm depth X 1.6 mm thickness |
| 145 | 4.12.2 100 mm width X 50 mm depth X 1.6 mm thickness |
| 146 | 4.12.3 150 mm width X 50 mm depth X 1.6 mm thickness |
| 147 | 4.12.4 300 mm width X 50 mm depth X 2.0 mm thickness |
| 148 | 4.4 SECTION -04 TECHNICAL LUMINAIRE & LIGHTING MANAGEMENT SYSTEMInstalation, fixing, testing and commissioning of the following LED light fitting / strip etc. along with required accessories to be connected with suitable size copper FRLS PVC ISI marked multistrand insulated wire of 2 or 3 core wire as per site requirement including required hard ware, connector etc. - 4.4.1- Surface mounted Flexible linear led strip light 10W/m 4000K dimmable CRI>80 , Dimensions: 20mm X 20mmmmX length as per drawing |
| 149 | 4.4.2 Recessed Downlight Diffused 15W 4000K Non dimmable, CRI>80 Dimensions: Dia -150mm, H- 100mm |
| 150 | 4.4.3 Recessed Magnetic Track dimmable Dimensions- L-1000mm , W- 45mm, H - 85mm |
| 151 | 4.4.4 Magnetic Track Spot 10W, 1000 Lumne, 23 deg, 4000K, dimmable DT-8 driver, CRI>80, Dimensions : Dia- 45mm, H- 68mm |
| 152 | 4.5 SECTION -05 LIGHT FIXTURES AND FITTINGLight Fixtures (Provisional amount Rs. 1500000). Contractor will be paid as per the actual cost purchased by him , as per selection of Light fixtures by design Consultant, and as directed by the Banks Engineer. Plus 15% of the amount of invoice (cost excluding GST) will be paid to contractor for Overhead and Profit, transportation, handling, lead and lift, or any other expenses essential to complete the job and to fuction the light |
| 153 | SECTION -06 PASSIVE NETWORKING 4.6 LAN NETWORK I/O POINTSSupply, Laying, installation, testing & Commissioning of CAT 6 cable ISI marked to respective I/O point (partly in concelaled manner / surface/ on wall) provided in suitable size of medium mechanical stress (MMS) conduit with all required accessories like coupler, bend, long bend, tee, junction box, required hardware materials etc. as per site requirement, terminated in I/O point with RJ45 Jack with modular plate type outlet of approved make mounted on suitable size heavy duty PVC plate with concealed PVC back box(switch board of same make) all required hardware materials labour involve, civil work required for concealing the pipes etc as per site requirement, complete in all respect. |
| 154 | SECTION -07 CCTV CABLING4.7 Supply, Laying, installation, testing & Commissioning of CAT 6 cable ISI marked to respective I/O point (partly in concelaled manner / surface/ on wall) provided in suitable size of medium mechanical stress (MMS) conduit with all required accessories like coupler, bend, long bend, tee, junction box, required hardware materials etc. as per site requirement, terminated in I/O point with RJ45 Jack with modular plate type outlet of approved make mounted on suitable size heavy duty PVC plate with concealed PVC back box(switch board of same make) all required hardware materials labour involve, civil work required for concealing the pipes etc as per site requirement, complete in all respect. |
| 155 | SECTION -08 PUBLIC ADDRESS SYSTEM.4.8 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. |
| 156 | 4.9 Supplying, installation, testing & commissioning of speaker wire ISI marked Fire Retardant PVC insulated copper conductor wire in suitable size PVC conduit, Following pairs, cores and size including connections and interconnections etc. as per site requirement, complete in all respect.4.9.1- speaker cable Two pair, 2-core, 1.5 sqmm braided copper |
| 157 | 4.9.2 speaker cable Two pair, 2-core, 2.5 sqmm braided copper |
| 158 | 4.9.3 speaker cable Two pair, 2-core, 4 sqmm braided copper |
| 159 | 4.9.4 Supplying, installation, testing & commissioning of 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. |
| 160 | 4.9 SECTION -09 FIRE ALARM SYSTEMCare fully removing the existing Fire alarm devices such as hooter, Response indicator, Manual call point, direction arrow with sounder, sensor etc. and retaining the same at some location during dismantling of the ceiling with temporary arrangement by hanging with GI wire/ box etc. Rate shall also include refixing of fire alarm devices as per old location, as directed by Bank's fire Officer/Engineer. |
| 161 | 5 STRUCTURAL MS WORK FOR ROOF5.1 Structural steel work riveted, bolted or welded in built-up sections, trusses and framed work, comprising fabrication, assembly, drilling, welding, cutting, hoisting, erection and fixing in position true to line, level and plumb, complete with gussets, connection plates, cleats, packers, bolts and welding consumables of approved make and grade, and applying one priming coat of approved steel primer after cleaning the surface, complete in all respects, no deduction for holes and no addition for rivets, bolts and weld metal, to the entire satisfaction of the Bank's Engineer. |
| 162 | 5.2 Providing and fixing 50 mm thick PUF insulated sandwich panels as roof covering of approved make (Kingspan Jindal / Lloyd/ EPACK Prefab or equivalent approved), rigid PUF core of density 40 ± 2 kg/m³ and thermal conductivity not exceeding 0.025 W/m·K at 25°C mean temperature, continuously bonded to 0.5 mm thick pre-painted galvanised / Aluzinc coated steel sheet on both faces in approved colour, 1000/1100 mm effective cover width with interlocking side lap, factory gasket and through-fix / concealed-clip fixing, laid to the slope shown (min. 1 in 20) with end laps over purlins and min. 200 mm end lap, side laps sealed with butyl mastic tape, complete with ridge and eaves pieces, gutter-end closings, drip caps, verge and corner trims of matching sheet and colour, all penetrations framed and made watertight with approved sealant, no core exposed anywhere, including water sprinkling / ponding test of the completed roof, film removal within 30 days, patching, touch-up, carting, hoisting, scaffolding and all accessories in position complete, trims and flashings included to the entire satisfaction of the Bank's Engineer. Basic rate of PUF panle Rs. 1985/- per sqm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 21, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender