Tender For Special Repair To Bldg No P-31 & P-32 Jcos Otm Accn Of 17 Garh Rif At Nams
Tender Value
44.34 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
6 days left
EMD
88696
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Amritsar → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-31 & P-32 Jcos Otm Accn Of 17 Garh Rif At Nams
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-Oct-2026 | Revised BOQ | BOQ | 09-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkhat or frame not exc 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sq.m but not exc. 4 sq.m each complete all as specified and directed. |
| 3 | M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed. |
| 4 | Material and labour for 35 mm thick factory made solid PVC (Wood Polymer composite) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including S.S wire mesh shall be fixed with screwing 8 x 28 mm heat metal zink coated screws can be remove or fix again after changing of wire mesh when needed. The density shall be as per manufactures instructions complete all as specified and directed. |
| 5 | Material and labour for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note : Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 6 | Material and labour for Factory made single extruded WPC (Wood Polymer Composite) solid door frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant including making good after complete all as speicifed and directed. |
| 7 | Supply and fix anodised aluminium powder coated any colour minimum coating 50 micron three track windows/ventilators with one or more rebates including joining cleat for fixing etc complete with frame and shutter of fixing with handles, tower bolts, rubber gasket and maruti lock, and making good to disturbed surface with cement concrete 1:2:4 and cement mortar 1:4 complete all as specified and directed.Note :- Floor door spring, sheet glass, wire cloth, etc shall be measured and paid seperately. |
| 8 | Supply and fix anodised aluminium powder coated window and ventilator shutters, sliding/side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.), hinges type B-21 100mm long (2 nos.) suitable handle (1 no.), rollers etc. complete all as specified and directed. |
| 9 | Supply and fix 5.5 mm thick, black tinted glass panes with nano coating fixed to aluminium doors/windows/vents with necessary rubber gaskets duly with complete all as specified and directed. |
| 10 | Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed. |
| 11 | S&F 100mm long stainless steel butt hinges welded or screwed , complete all as specified and directed. |
| 12 | S & F aluminium handle cast type anoodised 150mm size ISI mark complete all as specified and directed. |
| 13 | S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed ISI marked complete all as specified and directed. |
| 14 | S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed. |
| 15 | S&F in repairs 300mm long mild steel ordinary rat tail rod pattern spring with roller plate including fixing with nails/ bolts or welded complete all as specified and directed. |
| 16 | Dismantling of brick works in cement mortar complete all as specified and directed. |
| 17 | M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed. |
| 18 | ditto above -17- but except bricks complete all as specified and directed. |
| 19 | M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls built in CM 1:4 complete all as specified and directed. |
| 20 | Taking down cement plaster on brick/stone/concrete walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance n exc. 500 mtrs where directed complete all as specified and directed. |
| 21 | M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick or concrete work and finishing the surface even and smooth (without using extra cement) incl WPC @3% weight of cement complete all as specified and directed. Note-WPC will be measured and paid separately under appropriate items |
| 22 | M&L for 15 mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as spd and directed. |
| 23 | M&L for 05 mm thick cement plaster in CM (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth (without using extra cement) etc complete all as specified and directed. |
| 24 | Supply only water proofing compound ISI marked complete all as specified and directed. |
| 25 | M & L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 26 | M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer incl 1mm thick wall care putty complete all as specified and directed. |
| 27 | M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 28 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 29 | M&L for applying two coat of cement base paint on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. |
| 30 | M&L for applying two coat of oil bound distemper on walls, pillars cornices etc surface incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and incl filling necessary where required with putty as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed. |
| 31 | M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying two coat of white wash on ceiling surface complete all as specified |
| 32 | M&L for Applying 2 mm thick wall care putty to achieve even and smooth surfaces on old scraped surfaces or new plasterd surfaces and obtain using sand paper complete all as specified and directed.Note-Entire spalashes in floor shall be cleaned immediately after completion of periodical services. |
| 33 | Material and labour for preparation of steel surfaces of exceeding 10cm width or girth and applying one coat of synthetic enamell paint complete all as specified and directed. |
| 34 | Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, slab , RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed. |
| 35 | Taking up or down steel tubing and connections for 15 mm bore of pipe complete all as specified and directed. |
| 36 | Taking up or down steel tubing and connections for 20 mm bore of pipe complete all as specified and directed. |
| 37 | Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors incl all necessary fittingscomplete all as specified and directed. |
| 38 | Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including all necessary fittings complete all as specified and directed. |
| 39 | Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified in SSR Part-I complete all as specified and directed. make Sintex |
| 40 | M&L for Demolition of reinforced cement concrete of cover slab/cooking platfrom and RCC roof tank etc complete all as specified and directed. |
| 41 | M&L for 50mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L for cement concrete (1:2:4), type B-1, using 20mm graded stone aggregate in window cills, lintel band, bed block, copings and the like including weathering, slightly rounded or chamfered angles and throating, Including necessary form work complete all as specified and directed. |
| 43 | Supply & fix in repair, Vitreous China Wash Hand Basin, white, flat back, size 550 x 400 mm including brass coupling, mild steel brackets fixed to wall with pedestal etc. complete all as specified and directed. |
| 44 | S&F, in repair, vitreous china floor mounted singel peace WC with PP soft close seat cover , hinges accessories set as per size 375x660x800mm with cistern fitting (including fixing bolts flush pipe) complete all as specified and directed. |
| 45 | S&F in repair 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook. |
| 46 | S&F in repair, overhead shower 200mm x 200mm square shape single flow (ABS body chrome plated with gray face plate ) incl shower arm 190mm long with rubit cleaning system complete all as spd and directed |
| 47 | S & F in repair 15mm bore dia fancy type chromium plated long body bib tap with crutch or buttewrfly handle screwed down to iron pipe with all fittings complete all as specified and directed. |
| 48 | Supply & fix in repair for 15mm bore fancy type central hole basin mixer with 135 mm extension body fixed spout without popup waste system with 350 mm long braided hoses of 15 degree flow angle complete all as specified and directed |
| 49 | Supply & fix in repair, brass chromium plated single lever wall mixer 4-in-1 system with provision of both over head shower with 115 mm long bend pipe connecting legs and wall flange (wihout head shower) complete all as specified and directed. |
| 50 | S & F in repair 15 bore dia chromium plated Stop cock/Angle cock screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for unions complete all as specified and directed. |
| 51 | S & F in repairs 15 mm bore dia fancy type chromium plated long shank and cup stop valves (Concealed type), cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 52 | S&F 450mm long PVC connections with PTMT nuts of suitable for 15mm bore dia pipe complete all as specified and directed. |
| 53 | S&F in repair, 600mm x 1100mm plain edge mirror of selected quality glass not less than 5mm thick, mounted on wall complete all as specified and directed |
| 54 | S&F, in repairs, brass, chromium plated tubular towel rack 20mm dia 60cm long between flanges, 300mm vide with hooks complete all as specifed and directed. |
| 55 | Demolition of cement concrete (un-reinforced) in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance n. exc. 100 mtrs where directed complete all as specified and directed. |
| 56 | M&L for 75mm thick PCC 1:3:6, Type C-1 (using 20mm graded aggregate) as in Plinth protection, making even and smooth surface without using extra cement complete all as specified and directed. |
| 57 | M&L for reinforced precast cement concrete 1:2:4 Type B1 (using 20mm graded aggregate) as in cover slabs (for drain.) , and similar articles with plain faces set in cement mortar 1:6 complete all as spd and directed. |
| 58 | M&L TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Quality confirming to FE 500D complete all as specified and directed. |
| 59 | M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 09 sqm but not exceeding 0.11 sqm, in floors etc. laid over 15mm thick screed bed in cement mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 60 | M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) , incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 61 | M&L for Non skid ceramic pattern or any colour coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including screed bed or bedding layer 15 mm thick in cement mortar 1:6 for laying floor finishesincl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 62 | M&L for Non skid ceramic pattern or any colour coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, as in skirting ,dados in vertical surfaces etc and including 10mm thick cement plaster 1:4 incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 63 | M&L vetrified Full Body 9 to 10 mm thick, in (Square/rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match incl dismantling / demolition , coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed. |
| 64 | M&L for Vitriefied Full Body tiles 9 to 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match incl dismantling / demolition , Coloured on incl plaster (backing coat) 1:4 CM 10mm thick |
| 65 | M&L for heavy GVT step and riser 8 to 9mm thick size300mmx1200mm , 200mmx1200mmor and landiing as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) inlcuding demolition complete all as specified and directed. |
| 66 | M&L for heavy duty, exterior grade (Durastone of Somany/Endura of jhonson or equivalent as approved by GE) of any size 12mm thick, as in floor (in trades, landing etc ), set, jointed and pointed in neat cement slurry with white cement and pigment laid over and including screed bed or bedding layer of 15 mm thick in cement mortar (1:6) complete all as specified and directed. |
| 67 | M&L for 15-18mm thick black granite stone (of any type) machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture or pigment to match the shade of stone in window cills, jams,cooking platform pillars etc.laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding and rubbing and polishing complete all as specified and directed. |
| 68 | M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed. |
| 69 | M&L for 200mm bore dia RCC Class NP 3 pipes laid and jointed with collar incl dismantling of old pipe by excavation, digging, bearking up etc, complete all as specified and directed. |
| 70 | Material & labour for PCC 1:3:6 type C-2 (using 40mm graded granite stone aggregate) as in bed of 200mm dia RCC pipes including forming cradels after they are laid and tested in all as specified and directed. |
| 71 | Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed. |
| 72 | Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 73 | M & L for 50mm avarage thickness PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as roof padding ,hunching, sub base floor, even and smooth without using extra cement for further treatment complete all as specified and directed. |
| 74 | M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) applied on primed surface by forced application of heat and roller, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed. |
| 75 | M&L, 40 mm thick brick tiles laid and joints in cement mortar (1:3) over 25 mm thick screed bed in cement morter 1:4 and flush pointing as work proceed complete all as specified and directed. |
| 76 | ditto above item No 75 but except bricks tiles complete all as specified and directed. |
| 77 | M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 78 | M&L for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement in concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) of complete as specified and directed. |
| 79 | Material and labour for Water proofing treatment to sunken floors of kitchen, toilets, laboratories, bath and WC's etc shall be as under :- (a) Application of Two component Acrylic modified cementitious coating(i) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates must be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance, existing coatings and achieve a gripping profile that is clean, dry and free from laitance and any other form of surface contamination. The installation instructions in manufacturer’s published literature should be strictly complied with, including but not limited to the following :- (ii) Chipping out any visible cracks in “V-Groove” pattern as applicable. Special attention on this part. Cleaning of cracks & then filling those cracks with SIKA latex SBR 100 putty/ Dr Fixit 302 SBR latex / Perma latex SBR / FOSROC Nitabond SBR latex / Asian Paints latex as required. Final cleaning of surface with power grinder, wire brush, hair brush & vacuum pressure if required.(iii) Dampen all surfaces immediately ahead of application of Acrylic modified Cementitious coating of Sika Top Seal – 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO. (iv) Whilst the surface is still damp from saturation (S.S.D), apply one coat of Acrylic modified Cementitious coating of Sika Top Seal – 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer’s instructions.(v) Apply Glass Fabric Sheet of Sika Fab 1 / FOSROC/ Dr Fixit/ STP whilst the first coat is wet.(vi) Once touch dry, apply second coat of Acrylic modified Cementitious coating of Sika Top Seal – 107 / Brush Bond FOSROC/ Dr Fixit/ STP/CICO of viscosity as per manufacturer’s instructions on the entire area.(vii) Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. |
| 80 | (viii) The waterproofing coating should be taken to a height minimum 300 mm above the finished floor level on the vertical surface.(ix) It is essential to cure Acrylic modified Cementitious coating immediately after application (minimum 6-8 Hrs drying) for a minimum of 3 to 5 days to ensure full cement hydration and to minimize cracking.(x) A protection plaster (12-15mm thick) in CM 1:3 admixed with appropriate Integral water proofing compound has to be applied on the walls.Admixture : Sika Plastocrete Plus / FOSROC / Dr Fixit / STP / CICO confirming to IS 2645.Providing and applying a protection screed of 50mm thick 1:4, cement sand mortar admixed with Sika Plastocrete over the applied water proofing coating on horizontal surfaces. Admixture : Sika Plastocrete Plus / FOSROC / Dr Fixit / STP / CICO confirming to IS 2645(xi) All the corners and joints should be pre-treated with an elastic waterproofing sealing tape with a Woven bonding mesh on each surface and an elastic expansions zone in the centre of Make Sika Seal Tape S/FOSROC/Dr Fixit/STP.(xii) The membrane has to be protected in accordance with the manufacturer’s recommendations until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and make repairs in accordance with manufacturer’s recommendations(xiii) Waterproofing treatment has to be carried out through applicators authorised |
| 81 | (b) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (c) Al CI traps in sunken slabs to be enclosed with PCC 1:1.5:3 (min 15cm) All-round. (d) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40mm stone aggregate) complete all as specified (e) Providing drainage spout pipe GI 40 mm dia bore light grade upto outside of outer wall (Approx 450 mm to 600 mm long) including cutting to existing wall and making good the disturbed surface complete all as specified and directed.(f) Providing 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in flooring for laying floor finish all as specified. Note: Items No 79 (d), (e) & (f) shall be measured and paid separately. |
| 82 | S&F in repair 40mm dia GI pipe medium grade 45 cm long for a spout pipe including necessary cutting of existing beam/slab and fixing with cement concrete 1:2:4 complete all as specified and directed. |
| 83 | S&F, in repair, 25 mm dia, 1 mm wall thickness stainless steel fancy type, decorative curtain rod with decorative ball type side brackets (As per Sample) fix with wooden gutties complete all as specified and directed. |
| 84 | Supply and fix in repair PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed. |
| 85 | S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/Wall or trenches incl taking down old pipe complete all as specified and directed. |
| 86 | S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints and necessary fittings laid in floors/wall or trenches incl taking down old pipe complete all as specified and directed. |
| 87 | S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. |
| 88 | S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed. |
| 89 | S&F, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. |
| 90 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. Please Enable Macros to View BoQ information |
| 91 | S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 09, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender