Tender For Repair And Maintenance Of E/M Installated At Vsn Under Ge(Af) Chiloda
Tender Value
28 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
19 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair And Maintenance Of E/M Installated At Vsn Under Ge(Af) Chiloda
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete as specified and directed by Engr in Charge. |
| 2 | M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed by Engr in Charge. Make :- Jindal/TATA/JSW or equivalent as approved by GE |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed by Engr in Charge.Make :- Jindal/TATA/JSW or equivalent as approved by GE |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete as specified and directed by Engr in Charge. |
| 5 | S&F for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-A,etc complete as specified and directed by Engr in Charge. |
| 6 | S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A complete as specified and directed by Engr in Charge. |
| 7 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm and not exceeding 10cm long and dia of neck 11 to 15mm, complete as specified and directed by Engr in Charge. |
| 8 | S & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165, complete as specified and directed by Engr in Charge. |
| 9 | M&L PCC 1:3:6 type C2 using 40mm graded stone agg as in foundations, filling and mass-concretecomplete as specified and directed by Engr in Charge. |
| 10 | S&F in repair for Steel rolling shutters 1.25mm thick, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle including ball bearing and Safety lever locks mild steel with 4 levers for rolling shutters complete as specified and directed by Engr in Charge. |
| 11 | M&L for repair and reoperating old rolling shutter of any size by oiling and greasing and required small all fittings and fixtures of shutter including necessary welding , channel rails, guard cover etc complete all as specified and directed by Engineer in charge. |
| 12 | M & L for preparation of newly steel surfaces of any description, over 10cm in width or girth,not otherwise described two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete as specified and directed by Engr in Charge. |
| 13 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint complete as specified and directed by Engr in Charge. |
| 14 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete as specified and directed by Engr in Charge. |
| 15 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete as specified and directed by Engr in Charge. |
| 16 | M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces at any height including Chajjas, balcony and parapet, finished even and smooth without using extra cement complete as specified and directed by Engr in Charge. |
| 17 | M&L rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete as specified and directed by Engr in Charge. |
| 18 | Material & Labour for applying Two coats of 100% Premium acrylic Emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces. complete as specified and directed by Engr in Charge. |
| 19 | M&L for preparation of new plaster surfaces and applying two coats of distemper oil emulsion over a priming coat complete as specified and directed by Engr in Charge. |
| 20 | M & L for Cement concrete 1:4:8 type D2 (40mm graded aggregate) in sub base of hardstanding/ paver block/ checked tile/ stone slabe complete as specified and directed by Engr in Charge. |
| 21 | M & L for 100 mm thick cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in floor complete as specified and directed by Engr in Charge. |
| 22 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade (ISI Mark) complete as specified and directed by Engr in Charge. |
| 23 | Refixing for Machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of 60/ 80 mm thickness M-35 grade including leveing and spreading of sand cusion as laying in floor etc complete as specified and directed by Engr in Charge. |
| 24 | M&L for sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete as specified and directed by Engr in Charge. |
| 25 | M&L cement 1:3:6, type C1, using 20 mm aggregate providing, cement concrete in edges of path, rounded or chamfered on edges etc complete as specified and directed by Engr in Charge. |
| 26 | Taking down Chowkats or frames n exc. 1.50 sqm each, with shutters (without taking off shutters from the frame) and to store complete as specified and directed by Engr in Charge. |
| 27 | Taking down Chowkats or frames exc 1.50 sqm but not exc. 4 Sqm each, with shutters (without taking off shutters from the frame) and to store complete as specified and directed by Engr in Charge. |
| 28 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete as specified and directed by Engr in Charge. |
| 29 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete as specified and directed by Engr in Charge. |
| 30 | Taking down shutters of any description exc. 1.00 sq. m and n. exc. 2.00 sqm each complete as specified and directed by Engr in Charge. |
| 31 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete as specified and directed by Engr in Charge. |
| 32 | S & F in repairs Health faucets ,hand shower stand / hook only brass cromium plated including screw for fixing on wall etc complete as specified and directed by Engr in Charge. |
| 33 | S&F in repairs Vitreous China squatting pan of pattern `long pan', size 580mm white with `p' or `S' trap, front or back inlet & foot rests, any pattern (exclusing flushing cistern & flush pipe) complete as specified and directed by Engr in Charge.Make: CERA S3010109 or equivalent of Parryware/Hindware |
| 34 | S&F in repairs 15 mm size bib tap with wall flange and aerator cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe complete as specified and directed by Engr in Charge.Make:- CERA F 2008151 or equivalent of Parryware/Hindware |
| 35 | S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union complete as specified and directed by Engr in Charge. |
| 36 | S & F in repair grating doom 150 x 150 mm of brass chromium plated, complete as specified and directed by Engr in Charge. |
| 37 | S & F in repair PVC connection 15 mm size with PTMT nuts on both end, length 600 mm complete as specified and directed by Engr in Charge. |
| 38 | S&F in repair vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces complete as specified and directed by Engr in Charge.Make:- CERA: S2040103 or equivalent of Parryware/Hindware |
| 39 | S&F in repairs 32 mm size waste pipe for wash hand basin / urinal / sink complete as specified and directed by Engr in Charge. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as specified and directed by Engr in Charge. |
| 41 | M & L for glazed ceramic colour tiles in vertical surfaces 300x 200x 7mm/ 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat of 10mm thick in CM (1:4) complete as specified and directed by Engr in Charge. |
| 42 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) all as specified and directed. |
| 43 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.16 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) complete as specified and directed by Engr in Charge. |
| 44 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc, removing materials from site and making good disturbed surface of walls, floors etc. complete as specified and directed by Engr in Charge. Please Enable Macros to View BoQ information |
| 45 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc, removing materials from site and making good disturbed surface of walls, floors etc. complete as specified and directed by Engr in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender