Tender For Special Repair To Bldg No P-01 (Wt Stn) At Rnc Under Ge (South) Udh Ur
Tender Value
36.58 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
17 days left
EMD
73000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-01 (Wt Stn) At Rnc Under Ge (South) Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : SPL REPAIR TO BLDG NO P-01 (WT STN) AT RNC UNDER GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)-110/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each including cutting holes for taking out hold fasts, dismantaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all specified and directed by Engr-in-charge. |
| 3 | All as per ser item No 01 but exc. 1.5 Sqm but n.exc 4 Sqm each, -ditto- complete all specified and directed by Engr-in-charge. |
| 4 | Dismantling wrought iron or mild steel work in any description not otherwise specifically provided for all specified and directed by Engr-in-charge. |
| 5 | Dismantling floor hearth or wall tiling including cement mortar beddig not backing and removing rubbish off the premises all specified and directed by Engr-in-charge. |
| 6 | Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all specified and directed by Engr-in-charge. |
| 7 | Dismantling AC, reinforced concrete, PVC (SWR) drain pipes, jointed in cement mortar of any dia upto 100mm. all specified and directed by Engr-in-charge. |
| 8 | S&F Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve and tank nipple, including dismantling of existing tank, complete all specified and directed by Engr-in-charge. |
| 9 | Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in kitchen platform, floors, aprons etc all specified and directed by Engr-in-charge. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all specified and directed by Engr-in-charge. |
| 11 | Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles all specified and directed by Engr-in-charge. |
| 12 | Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth in hard/dense soil and getting out all specified and directed by Engr-in-charge. |
| 13 | Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick all specified and directed by Engr-in-charge. |
| 14 | Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all specified and directed by Engr-in-charge. |
| 15 | S & F 15mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all specified and directed by Engr-in-charge. |
| 16 | S & F 20mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all specified and directed by Engr-in-charge. |
| 17 | Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area all specified and directed by Engr-in-charge. |
| 18 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and removing old water proofing treatment on roof all specified and directed by Engr-in-charge. |
| 19 | M & L for digital glossy finished double charged Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all specified and directed by Engr-in-charge. |
| 20 | M & L for digital glossy finished double charged Vitrified tiles light Shade 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all specified and directed by Engr-in-charge. |
| 21 | M & L for dark shade vitrified ceramic tiles 1200 x 600 x (8x10) mm thick (square/rectangular) polished,area in floors etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match, and joints grouted with epoxy compound complete all specified and directed by Engr-in-charge. |
| 22 | All as per ser item No 20 above but in skirting over (8x10)mm thick back coat in Cement mortar 1:3 all specified and directed by Engr-in-charge. |
| 23 | Material and labour for joint free non skid ceramic colour tiles7 to 8mm thick (square/ rectangular) area of each tile n exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all specified and directed by Engr-in-charge. |
| 24 | M&L glazed ceramic coloured tiles 600 X 300 X 10 mm thick, digital pattern with dark, light and highlighter combination as in skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm back coat in CM 1:3 all specified and directed by Engr-in-charge. |
| 25 | M & L for Heavy Duty Step Stone Vitrified Stair Tile (of any type) work (table rubbed and polished) of size 1500 x 300 X (10-12)mm in steps, jambs, pillars etc over 15 mm thick screed bed in cement mortar 1:4 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all specified and directed by Engr-in-charge. |
| 26 | M & L for Granite (of any type) work (table rubbed and polished) of size 1200 x 300mm in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) us- ing marble dust with admix- ture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:4 all specified and directed by Engr-in-charge. |
| 27 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and all specified and directed by Engr-in-charge..With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 28 | M & L for Brushing neat cement slurry with 3.0kg of cement per sq. metre all specified and directed by Engr-in-charge. |
| 29 | M & L for providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges all specified and directed by Engr-in-charge. |
| 30 | M & L for rendering 5 mm thick on fair faces of concrete surface in CM 1:3 finished even and smooth without using extra cement with WPC at the rate of 3% by weight of cement all specified and directed by Engr-in-charge. |
| 31 | Material and labour for cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with One coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of roof all specified and directed by Engr-in-charge. |
| 32 | Material and labour for 3mm thick APP based polymeric membrane minimum weighing 3 kg/sqm non-woven polyester reinforcement polymeric water proofing membrane (wt not less than 150 gms/sqm) laid on primed surfaces by gas flame torch application and apply one coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg/Sqm over APP Memberence complete all specified and directed by Engr-in-charge.Note :- Water proofing treatment will be done by IWL or through a specialized agency which will further have to give a five years warranty for rectification of any defect if incurred at a later stage, otherwise no payment shall be made to the contractor if water proofing treatment is executed by engaging local labour. |
| 33 | M&L for rendering in two coats (10+5) 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces, finished the surfaces even and fair without using extra cement complete all specified and directed by Engr-in-charge. |
| 34 | Material and labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces including finishing even and smooth without using extra cement complete all specified and directed by Engr-in-charge. |
| 35 | Supply only water proofing compound (liquid),ISI marked all specified and directed by Engr-in-charge. |
| 36 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over 1mm thick wall care putty complete all specified and directed by Engr-in-charge. |
| 37 | Complete removal of existing treatment on wall/facia surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over mm thick wall care putty and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all specified and directed by Engr-in-charge. |
| 38 | Preparation of new plastered wall surfaces and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 1mm thick wall care putty complete all specified and directed by Engr-in-charge. |
| 39 | Complete removal of existing treatement and applying two coats of oil bound distemper white or tinted with roller application over a coat of chalk whitening primer over 1mm thick wall care putty complete all specified and directed by Engr-in-charge. |
| 40 | M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:4 finished even and smooth without using extra cement all specified and directed by Engr-in-charge. |
| 41 | M&L for applying two coats of white washing on ceiling including preparation of new plastered surfaces all specified and directed by Engr-in-charge. |
| 42 | M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all specified and directed by Engr-in-charge. |
| 43 | M&L for preparation of new steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all specified and directed by Engr-in-charge. |
| 44 | S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all specified and directed by Engr-in-charge. |
| 45 | M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 105 x 60 mm all specified and directed by Engr-in-charge. |
| 46 | S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc complete all specified and directed by Engr-in-charge. |
| 47 | S&F 30mm thick Flush shutters, solid core construction, with BWR(boiling waterproof grade) plywood face panels, commercial type on both sides & one face is covered with decorative face veneer with lipping/frame to match complete all specified and directed by Engr-in-charge. Make : Century/Green ply/Kit ply/Archid Note : - (i) Teak/Walnut veneer and satin lacquered finish plus brass trim. (ii) all edges shall be sealed with hardwood lipping or PU sealer with polish. |
| 48 | Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all specified and directed by Engr-in-charge. |
| 49 | S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all specified and directed by Engr-in-charge. |
| 50 | S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all specified and directed by Engr-in-charge. |
| 51 | S&F aluminum handles cast type, anodised, 150 mm size complete all specified and directed by Engr-in-charge. |
| 52 | S&F mild steel sliding door bolt plate type 250 mm long stove enamelled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all specified and directed by Engr-in-charge. |
| 53 | S&F Powder coated (50 micron of approved colour) three track Aluminum anodised shutter window (glazed and wire gauge) fixed type with aliminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including all fittings such as rubber gasket aluminum glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including all accessories complete all specified and directed by Engr-in-charge. |
| 54 | Providing and fixing powder coated Aluminium 2-shutter ventilator made of 1.50mm thick sheet & extruded section outer frame size 100mm x 44.50mm, having outer 02 Nos top hung glazed shutters made of 44.5mm x 44.5mm section with 5mm thick frosted glass pane fixed with neoprene rubber gasket and aluminium beading, each shutter with aluminium friction stay hinges 75mm (B-12) 02 Nos at top for outward opening and aluminium handle 75mm 01 No at bottom center at room side face, inner 02 Nos openable SS wire mesh shutters made of 44.5mm x 44.5mm section with stainless steel wire mesh 0.36mm nominal dia wire, average width of aperture 1.40mm fixed with SS staples, each shutter with stainless steel butt hinges 75mm 02 Nos and aluminium tower bolt 75mm 01 No, including EPDM gasket, all necessary hardware, accessories complete all specified and directed by Engr-in-charge. |
| 55 | S&F Aluminium alloy powder coated (50 micron) anodized frame of section 85mm x 44mm x 2mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing, glazed with 5mm thick tinted glass / partly with 12mm thick prelaminated particle board, fixed in repairs complete all specified and directed by Engr-in-charge. |
| 56 | S&F welded steel wire fabric mesh weight n.exc 4 Kgs per sqm fixed to steel members complete all specified and directed by Engr-in-charge. |
| 57 | Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde E-165 all specified and directed by Engr-in-charge. |
| 58 | S&F in repairs drapery rod of 25mm dia stainless steel 304 grade along with brackets and end caps of quality as approved by GE and all specified and directed by Engr-in-charge. |
| 59 | S&F in repair 15 mm dia Angle valves/ stop cock ,fancy type and chromium plated screwed down highpressure with crutch or butterfly handle screwedboth ends for iron pipes or for unions and fixed complete all specified and directed by Engr-in-charge. Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/Cera |
| 60 | S&F in repair gun metal globe gate valve 20 mm bore complete all specified and directed by Engr-in-charge. |
| 61 | S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed by Engr-in-charge. |
| 62 | S&F in repairs for Vitreous china wash down water closet Pan (pedestal pattern) white including seat cover complete all specified and directed by Engr-in-charge. |
| 63 | S&F in repairs 10 litres capacity PVC low level flushing cistern white inlet float valve, handle complete including brackets complete all specified and directed by Engr-in-charge. |
| 64 | S&F in repair health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all specified and directed by Engr-in-charge. |
| 65 | S&F PVC pipe 600mm long of 32 mm dia for low level cistern all specified and directed by Engr-in-charge. |
| 66 | S&F PVC connection 15 mm dia and 600mm long with two Nos of brass check nuts and washers complete all specified and directed by Engr-in-charge. |
| 67 | S & F in repair WHB coloured 550 mm x 480 mm with Pedestal in repair as approved and complete all specified and directed by Engr-in-charge. Make :CERA Cat Part No (S2040115 & S2090111). |
| 68 | S&F vitreous china urinal, half stall type white (including flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all specified and directed by Engr-in-charge. |
| 69 | S&F in repair Chromium plated toilet paper holder in repair complete all specified and directed by Engr-in-charge. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA. |
| 70 | Supply and fix in repairs Bib tap 15 mm bore, brass, chromium plated, fancy type with crutch or butterfly handle conforming to IS screwed down, screwed for iron pipes or for brass ferrule complete all specified and directed by Engr-in-charge. |
| 71 | S&F in repair CP Soap dish holder incl all fittings complete all specified and directed by Engr-in-charge. |
| 72 | S&F in repair 32 mm waste pipe of unplasticized PVC pipes of pressure rating 10 kgf/sq. cm, suitable for sink & WHB, in repair complete all specified and directed by Engr-in-charge. |
| 73 | S&F in repair 600 mm long brass chromium plated towel rail fancy type in repair complete all specified and directed by Engr-in-charge. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA. |
| 74 | S&F in repairs Front Glass shelf with chromium plated guard rails, all specified and directed by Engr-in-charge. |
| 75 | S&F Looking mirror of size 600x600mm with bevelled edges, fancy type, made of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers , complete all specified and directed by Engr-in-charge. Make: Modiguard or Crystal |
| 76 | S&F in repair 125 mm dia brass chromium plated shower rose with swivel joints in repair complete all specified and directed by Engr-in-charge. |
| 77 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches or in floor all specified and directed by Engr-in-charge. |
| 78 | All as per item No 76 but 75 mm bore pipe all specified and directed by Engr-in-charge. |
| 79 | S&F 110mm PVC (SWR) pipes single/Double socketed of any length with rubber ring joints pressure rating 4 kg/cm2 fixed to wall incl clamp etc complete all specified and directed by Engr-in-charge. |
| 80 | S& F 110 mm bore PVC SWR bends and fixed with joint sealent etc complete all specified and directed by Engr-in-charge. |
| 81 | M&L Hardcore of gauge not exc. 63 mm, Broken stone or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all specified and directed by Engr-in-charge. |
| 82 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement complete all specified and directed by Engr-in-charge. |
| 83 | M&L for 75mm thick Plain cement concrete type B-2, 1:3:6 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc, complete all specified and directed by Engr-in-charge. |
| 84 | S&F Vitrified Dura stone tiles of size n exc 0.36Sqm of 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, including jointed with neat cement slurry and pointed in coloured cement to match the surface of tiles, complete all specified and directed by Engr-in-charge. |
| 85 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all specified and directed by Engr-in-charge. |
| 86 | M&L for Brick work with sub class \\"B\\" bricks straight or curved on plan exceeding 6 Metre mean radius in cement mortar 1:6 all specified and directed by Engr-in-charge. |
| 87 | Reinforced cement concrete M-25 (20mm graded aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all specified and directed by Engr-in-charge. |
| 88 | M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all specified and directed by Engr-in-charge. |
| 89 | Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all specified and directed by Engr-in-charge. |
| 90 | M&L for 15 mm thick rendering on fair faces of brick, stone or concrete surfaces, finished even and smooth w/o using extra cement CM 1:4 all specified and directed by Engr-in-charge. |
| 91 | M&L for PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in coping, benching and the like incl form work all specified and directed by Engr-in-charge. |
| 92 | M&L for Plain cement concrete 1:4:8 type D-2 using 40mm graded agg as in foundation filling and mass concrete all specified and directed by Engr-in-charge. |
| 93 | M&L for PCC type B2 (1:2:4) using 40 mm graded cushed stone agg as in surface channels and drain beds all specified and directed by Engr-in-charge. |
| 94 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all specified and directed by Engr-in-charge. |
| 95 | Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/Metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall / ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white/ colour wash complete all specified and directed by Engr-in-charge. .Make : Havells/ Finolex/ Polycab. |
| 96 | All as per Srl item no 94 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 97 | All as per Srl item no 94 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 98 | All as per Srl item No 94 but for 3/5 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly. |
| 99 | All as per Srl item No 94 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4 Sq mm including copper PVC insulated PVC unsheathed suitable earth wire standard and connected to earth dolly. |
| 100 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all specified and directed by Engr-in-charge. |
| 101 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner / outer cover required module complete all specified and directed by Engr-in-charge. |
| 102 | S&F for modular socket 3/5 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner / outer cover required module complete all specified and directed by Engr-in-charge. |
| 103 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner / outer cover required module complete all specified and directed by Engr-in-charge. |
| 104 | M &L Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Blockcomplete all specified and directed by Engr-in-charge. |
| 105 | S&F electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all specified and directed by Engr-in-charge. |
| 106 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection and all specified and directed by Engr-in-charge. |
| 107 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all specified and directed by Engr-in-charge. Make:Havells/Bajaj/CG |
| 108 | S&F Sheet metal enclosure double door type for MCCB VTPN DB upto 125 Amps, 4 way vertical type 415 volts with suitable rated busbar and neutral link including MCCB 125 Amps , chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all specified and directed by Engr-in-charge. |
| 109 | S&F in replacement Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all specified and directed by Engr-in-charge. (Note-MCBs will be measured separately) |
| 110 | S & F in replacement MCB single pole 240 volt any rating from 6 to 32 amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all specified and directed by Engr-in-charge. |
| 111 | S & F in replacement MCB Single pole and neutral 240 volt any rating from 40/63 amps\\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable all specified and directed by Engr-in-charge. |
| 112 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit of suitable size including PVC insulated copper conductor cable 10 Sq mm as earth lead all specified and directed by Engr-in-charge. Including taking down old sub main wire. |
| 113 | S&F Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 1.5 Sqmm in PVC concealed conduit of suitable size including PVC insulated copper conductor cable 1.5 Sq mm as earth lead all specified and directed by Engr-in-charge. For building light. |
| 114 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost all specified and directed by Engr-in-charge. |
| 115 | Supply and fixing replacement LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed by Engr-in-charge. |
| 116 | S&F in repairs LED tube light fitting Garnet 20W Batten LED, lumen O/P should not be less than 100 lum/watt making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one all specified and directed by Engr-in-charge. |
| 117 | S&F in repairs LED tube light fitting Garnet 10W Batten LED, with lumen O/P should not be less than 100 lum/watt making all connection with suitable size flexible cable from ceiling rose to fitting including taking down old one all specified and directed by Engr-in-charge. |
| 118 | S&F in 36W (2 x 2) LED Ceiling/recess light panel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all specified and directed by Engr-in-charge. |
| 119 | S&F in replacement sheet metal enclosure MCB distribution board Single pole & neutral 240 volts 4 way with single door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good disturbed wall surfaces all specified and directed by Engr-in-charge. |
| 120 | Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with \\"XLPE\\" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 4 core size including taking out old unsv UG cable any type/size all specified and directed by Engr-in-charge. |
| 121 | S&F Double Walled corrugated DWC Pipe of size 40 mm including snap fit coupler Pt-II for protection of LT Cable in underground all specified and directed by Engr-in-charge. |
| 122 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles all specified and directed by Engr-in-charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 19, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender